Since this is a bridge, we don't start out with a respective DRM device.
Likewise this means we don't have a connector, which also means that we
should be following drm_dp_aux_register()'s documentation advice and not
call drm_dp_aux_register() until we have a matching connector. Instead,
call drm_dp_aux_init() in tc_probe() and wait until tc_bridge_attach() to
register our AUX channel. We also add tc_bridge_detach() to handle
unregistering the AUX adapter once the bridge has been disconnected.
Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/tc358767.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 34a3e4e9f717..da89922721ed 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1414,11 +1414,15 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
return 0;
+ ret = drm_dp_aux_register(&tc->aux);
+ if (ret < 0)
+ return ret;
+
/* Create DP/eDP connector */
drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, tc->bridge.type);
if (ret)
- return ret;
+ goto aux_unregister;
/* Don't poll if don't have HPD connected */
if (tc->hpd_pin >= 0) {
@@ -1438,10 +1442,19 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
return 0;
+aux_unregister:
+ drm_dp_aux_unregister(&tc->aux);
+ return ret;
+}
+
+static void tc_bridge_detach(struct drm_bridge *bridge)
+{
+ drm_dp_aux_unregister(&bridge_to_tc(bridge)->aux);
}
static const struct drm_bridge_funcs tc_bridge_funcs = {
.attach = tc_bridge_attach,
+ .detach = tc_bridge_detach,
.mode_valid = tc_mode_valid,
.mode_set = tc_bridge_mode_set,
.enable = tc_bridge_enable,
@@ -1680,9 +1693,7 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
tc->aux.name = "TC358767 AUX i2c adapter";
tc->aux.dev = tc->dev;
tc->aux.transfer = tc_aux_transfer;
- ret = drm_dp_aux_register(&tc->aux);
- if (ret)
- return ret;
+ drm_dp_aux_init(&tc->aux);
tc->bridge.funcs = &tc_bridge_funcs;
if (tc->hpd_pin >= 0)
@@ -1702,7 +1713,6 @@ static int tc_remove(struct i2c_client *client)
struct tc_data *tc = i2c_get_clientdata(client);
drm_bridge_remove(&tc->bridge);
- drm_dp_aux_unregister(&tc->aux);
return 0;
}
--
2.29.2
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
