Re: [PATCH 7/7] drm/amd/pm: implement processor fine grain feature for vangogh

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 08, 2021 at 06:01:08PM +0800, Quan, Evan wrote:
> [AMD Official Use Only - Internal Distribution Only]
> 
> -----Original Message-----
> From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Huang Rui
> Sent: Friday, January 8, 2021 4:55 PM
> To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Hou, Xiaomeng (Matthew) <Xiaomeng.Hou@xxxxxxx>; Huang, Ray <Ray.Huang@xxxxxxx>; Liu, Aaron <Aaron.Liu@xxxxxxx>; Du, Xiaojian <Xiaojian.Du@xxxxxxx>
> Subject: [PATCH 7/7] drm/amd/pm: implement processor fine grain feature for vangogh
> 
> This patch is to implement the processor fine grain feature for vangogh.
> It's similar with gfx clock, the only difference is below:
> 
> echo "p core_id level value" > pp_od_clk_voltage
> 
> 1. "p" - set the cclk (processor) frequency
> 2. "core_id" - 0/1/2/3, represents which cpu core you want to select
> 2. "level" - 0 or 1, "0" represents the min value,  "1" represents the
>    max value
> 3. "value" - the target value of cclk frequency, it should be limited in
>    the safe range
> 
> Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> ---
>  .../gpu/drm/amd/include/kgd_pp_interface.h    |  1 +
>  drivers/gpu/drm/amd/pm/amdgpu_pm.c            |  3 +
>  drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h       |  6 ++
>  drivers/gpu/drm/amd/pm/inc/smu_types.h        |  1 +
>  .../gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c  | 78 ++++++++++++++++++-
>  5 files changed, 88 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
> index 57b24c4c205b..a41875ac5dfb 100644
> --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
> +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
> @@ -156,6 +156,7 @@ enum {
>  enum PP_OD_DPM_TABLE_COMMAND {
>  PP_OD_EDIT_SCLK_VDDC_TABLE,
>  PP_OD_EDIT_MCLK_VDDC_TABLE,
> +PP_OD_EDIT_CCLK_VDDC_TABLE,
>  PP_OD_EDIT_VDDC_CURVE,
>  PP_OD_RESTORE_DEFAULT_TABLE,
>  PP_OD_COMMIT_DPM_TABLE,
> diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> index a5be03aa384b..298784f73705 100644
> --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> @@ -800,6 +800,8 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
> 
>  if (*buf == 's')
>  type = PP_OD_EDIT_SCLK_VDDC_TABLE;
> +if (*buf == 'p')
> [Quan, Evan] better to use "else if" here.

Fine.

> +type = PP_OD_EDIT_CCLK_VDDC_TABLE;
>  else if (*buf == 'm')
>  type = PP_OD_EDIT_MCLK_VDDC_TABLE;
>  else if(*buf == 'r')
> @@ -916,6 +918,7 @@ static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev,
>  size += smu_print_clk_levels(&adev->smu, SMU_OD_VDDC_CURVE, buf+size);
>  size += smu_print_clk_levels(&adev->smu, SMU_OD_VDDGFX_OFFSET, buf+size);
>  size += smu_print_clk_levels(&adev->smu, SMU_OD_RANGE, buf+size);
> +size += smu_print_clk_levels(&adev->smu, SMU_OD_CCLK, buf+size);
>  } else if (adev->powerplay.pp_funcs->print_clock_levels) {
>  size = amdgpu_dpm_print_clock_levels(adev, OD_SCLK, buf);
>  size += amdgpu_dpm_print_clock_levels(adev, OD_MCLK, buf+size);
> diff --git a/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h
> index 97d788451624..5f781a27cfb7 100644
> --- a/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h
> +++ b/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h
> @@ -465,6 +465,12 @@ struct smu_context
>  uint32_t gfx_default_soft_max_freq;
>  uint32_t gfx_actual_hard_min_freq;
>  uint32_t gfx_actual_soft_max_freq;
> +
> +uint32_t cpu_default_hard_min_freq;
> +uint32_t cpu_default_soft_max_freq;
> +uint32_t cpu_actual_hard_min_freq;
> +uint32_t cpu_actual_soft_max_freq;
> +uint32_t cpu_core_id_select;
>  };
> 
>  struct i2c_adapter;
> diff --git a/drivers/gpu/drm/amd/pm/inc/smu_types.h b/drivers/gpu/drm/amd/pm/inc/smu_types.h
> index 8e428c728e0e..b76270e8767c 100644
> --- a/drivers/gpu/drm/amd/pm/inc/smu_types.h
> +++ b/drivers/gpu/drm/amd/pm/inc/smu_types.h
> @@ -237,6 +237,7 @@ enum smu_clk_type {
>  SMU_SCLK,
>  SMU_MCLK,
>  SMU_PCIE,
> +SMU_OD_CCLK,
>  SMU_OD_SCLK,
>  SMU_OD_MCLK,
>  SMU_OD_VDDC_CURVE,
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
> index 63be82386964..4d02177cf9b0 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
> @@ -449,6 +449,15 @@ static int vangogh_print_fine_grain_clk(struct smu_context *smu,
>  (smu->gfx_actual_soft_max_freq > 0) ? smu->gfx_actual_soft_max_freq : smu->gfx_default_soft_max_freq);
>  }
>  break;
> +case SMU_OD_CCLK:
> +if (smu->od_enabled) {
> +size = sprintf(buf, "CCLK_RANGE in Core%d:\n",  smu->cpu_core_id_select);
> +size += sprintf(buf + size, "0: %10uMhz\n",
> +(smu->cpu_actual_hard_min_freq > 0) ? smu->cpu_actual_hard_min_freq : smu->cpu_default_hard_min_freq);
> +size += sprintf(buf + size, "1: %10uMhz\n",
> +(smu->cpu_actual_soft_max_freq > 0) ? smu->cpu_actual_soft_max_freq : smu->cpu_default_soft_max_freq);
> +}
> +break;
>  case SMU_OD_RANGE:
> [Quan, Evan] The allowed frequency range for cclk should prompt user here in SMU_OD_RANGE.

Fine.

>  if (smu->od_enabled) {
>  size = sprintf(buf, "%s:\n", "OD_RANGE");
> @@ -1245,7 +1254,7 @@ static ssize_t vangogh_get_gpu_metrics(struct smu_context *smu,
>  }
> 
>  static int vangogh_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TABLE_COMMAND type,
> -long input[], uint32_t size)
> +long input[], uint32_t size)
>  {
>  int ret = 0;
> 
> @@ -1255,6 +1264,34 @@ static int vangogh_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TAB
>  }
> 
>  switch (type) {
> +case PP_OD_EDIT_CCLK_VDDC_TABLE:
> +if (size != 3) {
> +dev_err(smu->adev->dev, "Input parameter number not correct (should be 4 for processor)\n");
> +return -EINVAL;
> +}
> +if (input[0] >= boot_cpu_data.x86_max_cores) {
> +dev_err(smu->adev->dev, "core index is overflow, should be less than %d\n",
> +boot_cpu_data.x86_max_cores);
> +}
> +smu->cpu_core_id_select = input[0];
> +if (input[1] == 0) {
> +if (input[2] < smu->cpu_default_hard_min_freq) {
> +dev_warn(smu->adev->dev, "Fine grain setting minimum cclk (%ld) MHz is less than the minimum allowed (%d) MHz\n",
> +input[2], smu->cpu_default_hard_min_freq);
> +return -EINVAL;
> +}
> +smu->cpu_actual_hard_min_freq = input[2];
> +} else if (input[1] == 1) {
> +if (input[2] > smu->cpu_default_soft_max_freq) {
> +dev_warn(smu->adev->dev, "Fine grain setting maximum cclk (%ld) MHz is greater than the maximum allowed (%d) MHz\n",
> +input[2], smu->cpu_default_soft_max_freq);
> +return -EINVAL;
> +}
> +smu->cpu_actual_soft_max_freq = input[2];
> +} else {
> +return -EINVAL;
> +}
> +break;
>  case PP_OD_EDIT_SCLK_VDDC_TABLE:
>  if (size != 2) {
>  dev_err(smu->adev->dev, "Input parameter number not correct\n");
> @@ -1286,6 +1323,8 @@ static int vangogh_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TAB
>  } else {
>  smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
>  smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
> +smu->cpu_actual_hard_min_freq = smu->cpu_default_hard_min_freq;
> +smu->cpu_actual_soft_max_freq = smu->cpu_default_soft_max_freq;
> 
>  ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetHardMinGfxClk,
>  smu->gfx_actual_hard_min_freq, NULL);
> @@ -1300,6 +1339,20 @@ static int vangogh_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TAB
>  dev_err(smu->adev->dev, "Restore the default soft max sclk failed!");
>  return ret;
>  }
> +
> +ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetSoftMinCclk,
> +      smu->cpu_actual_hard_min_freq, NULL);
> [Quan, Evan] better to name it as "soft_min_freq" instead of "hard_min_freq".

Fine.

Thanks for your comments.

Ray

> +if (ret) {
> +dev_err(smu->adev->dev, "Set hard min cclk failed!");
> +return ret;
> +}
> +
> +ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetSoftMaxCclk,
> +      smu->cpu_actual_soft_max_freq, NULL);
> +if (ret) {
> +dev_err(smu->adev->dev, "Set soft max cclk failed!");
> +return ret;
> +}
>  }
>  break;
>  case PP_OD_COMMIT_DPM_TABLE:
> @@ -1326,6 +1379,24 @@ static int vangogh_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TAB
>  dev_err(smu->adev->dev, "Set soft max sclk failed!");
>  return ret;
>  }
> +
> +ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetSoftMinCclk,
> +      ((smu->cpu_core_id_select << 20)
> +       | smu->cpu_actual_hard_min_freq),
> +      NULL);
> +if (ret) {
> +dev_err(smu->adev->dev, "Set hard min cclk failed!");
> +return ret;
> +}
> +
> +ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetSoftMaxCclk,
> +      ((smu->cpu_core_id_select << 20)
> +       | smu->cpu_actual_soft_max_freq),
> +      NULL);
> +if (ret) {
> +dev_err(smu->adev->dev, "Set soft max cclk failed!");
> +return ret;
> +}
>  }
>  break;
>  default:
> @@ -1351,6 +1422,11 @@ static int vangogh_set_fine_grain_gfx_freq_parameters(struct smu_context *smu)
>  smu->gfx_actual_hard_min_freq = 0;
>  smu->gfx_actual_soft_max_freq = 0;
> 
> +smu->cpu_default_hard_min_freq = 1400;
> +smu->cpu_default_soft_max_freq = 3500;
> +smu->cpu_actual_hard_min_freq = 0;
> +smu->cpu_actual_soft_max_freq = 0;
> +
>  return 0;
>  }
> 
> --
> 2.25.1
> 
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&amp;data=04%7C01%7Cevan.quan%40amd.com%7Ca1f6eb71deeb42ff36b708d8b3b338dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637456929634329975%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=nrUPCKEMCJqKBeGMjWfr7%2FCbuVaovJqC6AovtuRMtFk%3D&amp;reserved=0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux