When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.
Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
Signed-off-by: Dennis Li <Dennis.Li@xxxxxxx>
Change-Id: I42431f5d0bf54909e1df888a0d72fc009d8e196c
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 1cb7d73f7317..b69c34074d8d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2548,11 +2548,11 @@ static int amdgpu_device_ip_fini(struct amdgpu_device *adev)
if (adev->gmc.xgmi.num_physical_nodes > 1)
amdgpu_xgmi_remove_device(adev);
- amdgpu_amdkfd_device_fini(adev);
-
amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
+ amdgpu_amdkfd_device_fini(adev);
+
/* need to disable SMC first */
for (i = 0; i < adev->num_ip_blocks; i++) {
if (!adev->ip_blocks[i].status.hw)
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
