Enable Sienna Cichlid gfxclk/uclk overdrive support.
Change-Id: I93535076f5857c0dfeb012a993bc85a16ca4df84
Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
Acked-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 3 +-
.../amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 241 ++++++++++++++++++
2 files changed, 243 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index 7b6ef05a1d35..73aa78a158a6 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -730,7 +730,8 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
*
* - minimum and maximum engine clock labeled OD_SCLK
*
- * - maximum memory clock labeled OD_MCLK
+ * - minimum(not available for Vega20 and Navi1x) and maximum memory
+ * clock labeled OD_MCLK
*
* - three <frequency, voltage> points labeled OD_VDDC_CURVE.
* They can be used to calibrate the sclk voltage curve.
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
index cbee4ca43707..d1de617e85c6 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
@@ -913,6 +913,22 @@ static bool sienna_cichlid_is_support_fine_grained_dpm(struct smu_context *smu,
return dpm_desc->SnapToDiscrete == 0 ? true : false;
}
+static bool sienna_cichlid_is_od_feature_supported(struct smu_11_0_7_overdrive_table *od_table,
+ enum SMU_11_0_7_ODFEATURE_CAP cap)
+{
+ return od_table->cap[cap];
+}
+
+static void sienna_cichlid_get_od_setting_range(struct smu_11_0_7_overdrive_table *od_table,
+ enum SMU_11_0_7_ODSETTING_ID setting,
+ uint32_t *min, uint32_t *max)
+{
+ if (min)
+ *min = od_table->min[setting];
+ if (max)
+ *max = od_table->max[setting];
+}
+
static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
enum smu_clk_type clk_type, char *buf)
{
@@ -921,11 +937,15 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
struct smu_dpm_context *smu_dpm = &smu->smu_dpm;
struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context;
PPTable_t *pptable = (PPTable_t *)table_context->driver_pptable;
+ struct smu_11_0_7_overdrive_table *od_settings = smu->od_settings;
+ OverDriveTable_t *od_table =
+ (OverDriveTable_t *)table_context->overdrive_table;
int i, size = 0, ret = 0;
uint32_t cur_value = 0, value = 0, count = 0;
uint32_t freq_values[3] = {0};
uint32_t mark_index = 0;
uint32_t gen_speed, lane_width;
+ uint32_t min_value, max_value;
switch (clk_type) {
case SMU_GFXCLK:
@@ -1001,6 +1021,53 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
(lane_width == dpm_context->dpm_tables.pcie_table.pcie_lane[i]) ?
"*" : "");
break;
+ case SMU_OD_SCLK:
+ if (!smu->od_enabled || !od_table || !od_settings)
+ break;
+
+ if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_GFXCLK_LIMITS))
+ break;
+
+ size += sprintf(buf + size, "OD_SCLK:\n");
+ size += sprintf(buf + size, "0: %uMhz\n1: %uMhz\n", od_table->GfxclkFmin, od_table->GfxclkFmax);
+ break;
+
+ case SMU_OD_MCLK:
+ if (!smu->od_enabled || !od_table || !od_settings)
+ break;
+
+ if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS))
+ break;
+
+ size += sprintf(buf + size, "OD_MCLK:\n");
+ size += sprintf(buf + size, "0: %uMhz\n1: %uMHz\n", od_table->UclkFmin, od_table->UclkFmax);
+ break;
+
+ case SMU_OD_RANGE:
+ if (!smu->od_enabled || !od_table || !od_settings)
+ break;
+
+ size = sprintf(buf, "%s:\n", "OD_RANGE");
+
+ if (sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) {
+ sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_GFXCLKFMIN,
+ &min_value, NULL);
+ sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_GFXCLKFMAX,
+ NULL, &max_value);
+ size += sprintf(buf + size, "SCLK: %7uMhz %10uMhz\n",
+ min_value, max_value);
+ }
+
+ if (sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) {
+ sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_UCLKFMIN,
+ &min_value, NULL);
+ sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_UCLKFMAX,
+ NULL, &max_value);
+ size += sprintf(buf + size, "MCLK: %7uMhz %10uMhz\n",
+ min_value, max_value);
+ }
+ break;
+
default:
break;
}
@@ -1731,6 +1798,179 @@ static int sienna_cichlid_set_default_od_settings(struct smu_context *smu)
return 0;
}
+static int sienna_cichlid_od_setting_check_range(struct smu_context *smu,
+ struct smu_11_0_7_overdrive_table *od_table,
+ enum SMU_11_0_7_ODSETTING_ID setting,
+ uint32_t value)
+{
+ if (value < od_table->min[setting]) {
+ dev_warn(smu->adev->dev, "OD setting (%d, %d) is less than the minimum allowed (%d)\n",
+ setting, value, od_table->min[setting]);
+ return -EINVAL;
+ }
+ if (value > od_table->max[setting]) {
+ dev_warn(smu->adev->dev, "OD setting (%d, %d) is greater than the maximum allowed (%d)\n",
+ setting, value, od_table->max[setting]);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sienna_cichlid_od_edit_dpm_table(struct smu_context *smu,
+ enum PP_OD_DPM_TABLE_COMMAND type,
+ long input[], uint32_t size)
+{
+ struct smu_table_context *table_context = &smu->smu_table;
+ OverDriveTable_t *od_table =
+ (OverDriveTable_t *)table_context->overdrive_table;
+ struct smu_11_0_7_overdrive_table *od_settings =
+ (struct smu_11_0_7_overdrive_table *)smu->od_settings;
+ enum SMU_11_0_7_ODSETTING_ID freq_setting;
+ uint16_t *freq_ptr;
+ int i, ret = 0;
+
+ if (!smu->od_enabled) {
+ dev_warn(smu->adev->dev, "OverDrive is not enabled!\n");
+ return -EINVAL;
+ }
+
+ if (!smu->od_settings) {
+ dev_err(smu->adev->dev, "OD board limits are not set!\n");
+ return -ENOENT;
+ }
+
+ if (!(table_context->overdrive_table && table_context->boot_overdrive_table)) {
+ dev_err(smu->adev->dev, "Overdrive table was not initialized!\n");
+ return -EINVAL;
+ }
+
+ switch (type) {
+ case PP_OD_EDIT_SCLK_VDDC_TABLE:
+ if (!sienna_cichlid_is_od_feature_supported(od_settings,
+ SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) {
+ dev_warn(smu->adev->dev, "GFXCLK_LIMITS not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ for (i = 0; i < size; i += 2) {
+ if (i + 2 > size) {
+ dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size);
+ return -EINVAL;
+ }
+
+ switch (input[i]) {
+ case 0:
+ if (input[i + 1] > od_table->GfxclkFmax) {
+ dev_info(smu->adev->dev, "GfxclkFmin (%ld) must be <= GfxclkFmax (%u)!\n",
+ input[i + 1], od_table->GfxclkFmax);
+ return -EINVAL;
+ }
+
+ freq_setting = SMU_11_0_7_ODSETTING_GFXCLKFMIN;
+ freq_ptr = &od_table->GfxclkFmin;
+ break;
+
+ case 1:
+ if (input[i + 1] < od_table->GfxclkFmin) {
+ dev_info(smu->adev->dev, "GfxclkFmax (%ld) must be >= GfxclkFmin (%u)!\n",
+ input[i + 1], od_table->GfxclkFmin);
+ return -EINVAL;
+ }
+
+ freq_setting = SMU_11_0_7_ODSETTING_GFXCLKFMAX;
+ freq_ptr = &od_table->GfxclkFmax;
+ break;
+
+ default:
+ dev_info(smu->adev->dev, "Invalid SCLK_VDDC_TABLE index: %ld\n", input[i]);
+ dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n");
+ return -EINVAL;
+ }
+
+ ret = sienna_cichlid_od_setting_check_range(smu, od_settings,
+ freq_setting, input[i + 1]);
+ if (ret)
+ return ret;
+
+ *freq_ptr = (uint16_t)input[i + 1];
+ }
+ break;
+
+ case PP_OD_EDIT_MCLK_VDDC_TABLE:
+ if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) {
+ dev_warn(smu->adev->dev, "UCLK_LIMITS not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ for (i = 0; i < size; i += 2) {
+ if (i + 2 > size) {
+ dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size);
+ return -EINVAL;
+ }
+
+ switch (input[i]) {
+ case 0:
+ if (input[i + 1] > od_table->UclkFmax) {
+ dev_info(smu->adev->dev, "UclkFmin (%ld) must be <= UclkFmax (%u)!\n",
+ input[i + 1], od_table->UclkFmax);
+ return -EINVAL;
+ }
+
+ freq_setting = SMU_11_0_7_ODSETTING_UCLKFMIN;
+ freq_ptr = &od_table->UclkFmin;
+ break;
+
+ case 1:
+ if (input[i + 1] < od_table->UclkFmin) {
+ dev_info(smu->adev->dev, "UclkFmax (%ld) must be >= UclkFmin (%u)!\n",
+ input[i + 1], od_table->UclkFmin);
+ return -EINVAL;
+ }
+
+ freq_setting = SMU_11_0_7_ODSETTING_UCLKFMAX;
+ freq_ptr = &od_table->UclkFmax;
+ break;
+
+ default:
+ dev_info(smu->adev->dev, "Invalid MCLK_VDDC_TABLE index: %ld\n", input[i]);
+ dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n");
+ return -EINVAL;
+ }
+
+ ret = sienna_cichlid_od_setting_check_range(smu, od_settings,
+ freq_setting, input[i + 1]);
+ if (ret)
+ return ret;
+
+ *freq_ptr = (uint16_t)input[i + 1];
+ }
+ break;
+
+ case PP_OD_RESTORE_DEFAULT_TABLE:
+ memcpy(table_context->overdrive_table,
+ table_context->boot_overdrive_table,
+ sizeof(OverDriveTable_t));
+ fallthrough;
+
+ case PP_OD_COMMIT_DPM_TABLE:
+ sienna_cichlid_dump_od_table(smu, od_table);
+
+ ret = smu_cmn_update_table(smu, SMU_TABLE_OVERDRIVE,
+ 0, (void *)od_table, true);
+ if (ret) {
+ dev_err(smu->adev->dev, "Failed to import overdrive table!\n");
+ return ret;
+ }
+ break;
+
+ default:
+ return -ENOSYS;
+ }
+
+ return ret;
+}
+
static int sienna_cichlid_run_btc(struct smu_context *smu)
{
return smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL);
@@ -2855,6 +3095,7 @@ static const struct pptable_funcs sienna_cichlid_ppt_funcs = {
.get_dpm_ultimate_freq = sienna_cichlid_get_dpm_ultimate_freq,
.set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range,
.set_default_od_settings = sienna_cichlid_set_default_od_settings,
+ .od_edit_dpm_table = sienna_cichlid_od_edit_dpm_table,
.run_btc = sienna_cichlid_run_btc,
.set_power_source = smu_v11_0_set_power_source,
.get_pp_feature_mask = smu_cmn_get_pp_feature_mask,
--
2.29.0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
