On 2020-10-14 3:04 a.m., Yifan Zhang wrote:
Change-Id: I831a5ade8b87c23d21a63d08cc4d338468769e2b
Signed-off-by: Yifan Zhang <yifan1.zhang@xxxxxxx>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 3cf4e08931bb..aaff8800c7a0 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -887,12 +887,67 @@ static void amdgpu_check_debugfs_connector_property_change(struct amdgpu_device
}
}
+static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_addr_space_config *pa_config)
+{
+ uint64_t pt_base;
+ uint32_t logical_addr_low;
+ uint32_t logical_addr_high;
+ uint32_t agp_base, agp_bot, agp_top;
+ PHYSICAL_ADDRESS_LOC page_table_start, page_table_end, page_table_base;
+
+ logical_addr_low = min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18;
+ pt_base = amdgpu_gmc_pd_addr(adev->gart.bo);
+
+ if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+ /*
+ * Raven2 has a HW issue that it is unable to use the vram which
+ * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
+ * workaround that increase system aperture high address (add 1)
+ * to get rid of the VM fault and hardware hang.
+ */
+ logical_addr_high = max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18);
+ else
+ logical_addr_high = max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18;
+
+ agp_base = 0;
+ agp_bot = adev->gmc.agp_start >> 24;
+ agp_top = adev->gmc.agp_end >> 24;
+
+
+ page_table_start.high_part = (u32)(adev->gmc.gart_start >> 44) & 0xF;
+ page_table_start.low_part = (u32)(adev->gmc.gart_start >> 12);
+ page_table_end.high_part = (u32)(adev->gmc.gart_end >> 44) & 0xF;
+ page_table_end.low_part = (u32)(adev->gmc.gart_end >> 12);
+ page_table_base.high_part = upper_32_bits(pt_base) & 0xF;
+ page_table_base.low_part = lower_32_bits(pt_base);
+
+ pa_config->system_aperture.start_addr = (uint64_t)logical_addr_low << 18;
+ pa_config->system_aperture.end_addr = (uint64_t)logical_addr_high << 18;
+
+ pa_config->system_aperture.agp_base = (uint64_t)agp_base << 24 ;
+ pa_config->system_aperture.agp_bot = (uint64_t)agp_bot << 24;
+ pa_config->system_aperture.agp_top = (uint64_t)agp_top << 24;
+
+ pa_config->system_aperture.fb_base = adev->gmc.fb_start;
+ pa_config->system_aperture.fb_offset = adev->gmc.aper_base;
+ pa_config->system_aperture.fb_top = adev->gmc.fb_end;
+
+ pa_config->gart_config.page_table_start_addr = page_table_start.quad_part << 12;
+ pa_config->gart_config.page_table_end_addr = page_table_end.quad_part << 12;
+ pa_config->gart_config.page_table_base_addr = page_table_base.quad_part;
+
+ pa_config->is_hvm_enabled = 0;
+
+}
+
+
static int amdgpu_dm_init(struct amdgpu_device *adev)
{
struct dc_init_data init_data;
#ifdef CONFIG_DRM_AMD_DC_HDCP
struct dc_callback_init init_params;
#endif
+ struct dc_phy_addr_space_config pa_config;
int r;
adev->dm.ddev = adev_to_drm(adev);
@@ -1040,6 +1095,12 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
goto error;
}
+ mmhub_read_system_context(adev, &pa_config);
+
+ // Call the DC init_memory func
+ dc_setup_system_context(adev->dm.dc, &pa_config);
+
+
The dc_setup_system_context should come directly after dc_hardware_init().
With that fixed this series is
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
There's the vmid module as well that could be created after if needed
but for s/g suport alone that's not necessary.
Regards,
Nicholas Kazlauskas
DRM_DEBUG_DRIVER("KMS initialized.\n");
return 0;
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
