Normally softwareshutdowntemp should be greater than Thotspotlimit.
However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while
Thotspotlimit is 105C. This seems not right and may trigger some
false alarms.
Change-Id: I940cc6e450eebccd93ccdc3428187f6b7c09dcda
Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
---
.../drm/amd/pm/powerplay/hwmgr/vega10_thermal.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
index d572ba4ec9b1..952cd3d7240e 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
@@ -374,8 +374,18 @@ static int vega10_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
/* compare them in unit celsius degree */
if (low < range->min / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)
low = range->min / PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
- if (high > tdp_table->usSoftwareShutdownTemp)
- high = tdp_table->usSoftwareShutdownTemp;
+
+ /*
+ * As a common sense, usSoftwareShutdownTemp should be bigger
+ * than ThotspotLimit. For any invalid usSoftwareShutdownTemp,
+ * we will just use the max possible setting VEGA10_THERMAL_MAXIMUM_ALERT_TEMP
+ * to avoid false alarms.
+ */
+ if ((tdp_table->usSoftwareShutdownTemp >
+ range->hotspot_crit_max / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)) {
+ if (high > tdp_table->usSoftwareShutdownTemp)
+ high = tdp_table->usSoftwareShutdownTemp;
+ }
if (low > high)
return -EINVAL;
--
2.28.0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
