[Why] According to DP spec, DPRX with DPCD r1.2 or higher shall have the same Link/Sink Device Status field registers at DPCD Addresses 00200h through 00205h to the corresponding DPRX Event Status Indicator registers at DPCD Addresses 02002h through 0200Fh. We now only read from 02002h when DPCD revision number is r1.4 or higher while handling short HPD. Need to correct that. [How] Set to read from 02002h when DPCD is r1.2 or higher Signed-off-by: Wayne Lin <Wayne.Lin@xxxxxxx> --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 2bfa4e35c2cf..9fb1543b4c73 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1834,9 +1834,9 @@ static enum dc_status read_hpd_rx_irq_data( * fail, so we now explicitly read 6 bytes which is * the req from the above mentioned test cases. * - * For DP 1.4 we need to read those from 2002h range. + * For DPCD r1.2 or higher, we need to read those from 2002h range. */ - if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14) + if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_12) retval = core_link_read_dpcd( link, DP_SINK_COUNT, -- 2.17.1 _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
