Hey Matt,
I have just tested the amd-staging-drm-next branch
(dd654c76d6e854afad716ded899e4404734aaa10) with my patches reverted
and I can reproduce your issue with:
sudo sh -c 'echo "s 0 305 750" > /sys/class/drm/card0/device/pp_od_clk_voltage'
Which makes the sh hang with 100% usage.
The issue does not happen on the mainline (d8b9faec54ae4bc2fff68bcd0befa93ace8256ce)
both without and with my patches reapplied.
So the problem must be related to some commit that is present in the
amd-staging-drm-next but not in the mainline.
Paweł Gronowski
On Thu, Jul 30, 2020 at 06:34:14PM -0600, Matt Coffin wrote:
> Hey Pawel,
>
> I did confirm that this patch *introduced* the issue both with the
> bisect, and by testing reverting it.
>
> Now, there's a lot of fragile pieces in the dpm handling, so it could be
> this patch's interaction with something else that's causing it and it
> may well not be the fault of this code, but this is the patch that
> introduced the issue.
>
> I'll have some more time tomorrow to try to get down to root cause here,
> so maybe I'll have more to offer then.
>
> Thanks for taking a look,
> Matt
>
> On 7/30/20 6:31 PM, Paweł Gronowski wrote:
> > Hello Matt,
> >
> > Thank you for your testing. It seems that my gpu (RX 570) does not support the
> > vc setting so I can not exactly reproduce the issue. However I did trace the
> > code path the test case takes and it seems to correctly pass through the while
> > loop that parses the input and fails only in amdgpu_dpm_odn_edit_dpm_table.
> > The 'parameter' array is populated the same way as the original code did. Since
> > the amdgpu_dpm_odn_edit_dpm_table is reached, I think that your problem is
> > unfortunately caused by something else.
> >
> >
> > Paweł Gronowski
> >
> > On Thu, Jul 30, 2020 at 08:49:41AM -0600, Matt Coffin wrote:
> >> Hello all, I just did some testing with this applied, and while it no
> >> longer returns -EINVAL, running `sudo sh -c 'echo "vc 2 2150 1195" >
> >> /sys/class/drm/card1/device/pp_od_clk_voltage'` results in `sh` spiking
> >> to, and staying at 100% CPU usage, with no indicating information in
> >> `dmesg` from the kernel.
> >>
> >> It appeared to work at least ONCE, but potentially not after.
> >>
> >> This is not unique to Navi, and caused the problem on a POLARIS10 card
> >> as well.
> >>
> >> Sorry for the bad news, and thanks for any insight you may have,
> >> Matt Coffin
> >>
> >> On 7/29/20 8:53 PM, Alex Deucher wrote:
> >>> On Wed, Jul 29, 2020 at 10:20 PM Paweł Gronowski <me@xxxxxxxxxx> wrote:
> >>>>
> >>>> Regression was introduced in commit 38e0c89a19fd
> >>>> ("drm/amdgpu: Fix NULL dereference in dpm sysfs handlers") which
> >>>> made the set_pp_od_clk_voltage and set_pp_power_profile_mode return
> >>>> -EINVAL for previously valid input. This was caused by an empty
> >>>> string (starting at the \0 character) being passed to the kstrtol.
> >>>>
> >>>> Signed-off-by: Paweł Gronowski <me@xxxxxxxxxx>
> >>>
> >>> Applied. Thanks!
> >>>
> >>> Alex
> >>>
> >>>> ---
> >>>> drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 9 +++++++--
> >>>> 1 file changed, 7 insertions(+), 2 deletions(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> >>>> index ebb8a28ff002..cbf623ff03bd 100644
> >>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> >>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> >>>> @@ -778,12 +778,14 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
> >>>> tmp_str++;
> >>>> while (isspace(*++tmp_str));
> >>>>
> >>>> - while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) {
> >>>> + while ((sub_str = strsep(&tmp_str, delimiter)) && *sub_str) {
> >>>> ret = kstrtol(sub_str, 0, ¶meter[parameter_size]);
> >>>> if (ret)
> >>>> return -EINVAL;
> >>>> parameter_size++;
> >>>>
> >>>> + if (!tmp_str)
> >>>> + break;
> >>>> while (isspace(*tmp_str))
> >>>> tmp_str++;
> >>>> }
> >>>> @@ -1635,11 +1637,14 @@ static ssize_t amdgpu_set_pp_power_profile_mode(struct device *dev,
> >>>> i++;
> >>>> memcpy(buf_cpy, buf, count-i);
> >>>> tmp_str = buf_cpy;
> >>>> - while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) {
> >>>> + while ((sub_str = strsep(&tmp_str, delimiter)) && *sub_str) {
> >>>> ret = kstrtol(sub_str, 0, ¶meter[parameter_size]);
> >>>> if (ret)
> >>>> return -EINVAL;
> >>>> parameter_size++;
> >>>> +
> >>>> + if (!tmp_str)
> >>>> + break;
> >>>> while (isspace(*tmp_str))
> >>>> tmp_str++;
> >>>> }
> >>>> --
> >>>> 2.25.1
> >>>>
> >>>> _______________________________________________
> >>>> amd-gfx mailing list
> >>>> amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> >>>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
> >>> _______________________________________________
> >>> amd-gfx mailing list
> >>> amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> >>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
> >>>
> >>
> >
> >
> >
>
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
