[Why]
DCE6 has no bottom_pipe and no Blender HW
DCE6 needs 'blank_target' set to false in order to turn on the display
DCE6 has a specific dce60_pipe_control_lock() fuction that is a no op
[How]
Add DCE6 specific functions with needed private dce60_* dependent fuctions
Comment DCE6 specific CTRC program visibility implementation
Fix a typo in the initial header includes comment 's/DCE8/DCE6/g'
Use dce60_apply_ctx_for_surface() in dce60_hw_sequencer_construct
Use dce60_pipe_control_lock() in dce60_hw_sequencer_construct
Signed-off-by: Mauro Rossi <issor.oruam@xxxxxxxxx>
---
.../amd/display/dc/dce60/dce60_hw_sequencer.c | 381 +++++++++++++++++-
1 file changed, 379 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce60/dce60_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce60/dce60_hw_sequencer.c
index e30e3510ec4a..37bd91883926 100644
--- a/drivers/gpu/drm/amd/display/dc/dce60/dce60_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce60/dce60_hw_sequencer.c
@@ -32,22 +32,399 @@
#include "dce110/dce110_hw_sequencer.h"
#include "dce100/dce100_hw_sequencer.h"
-/* include DCE8 register header files */
+/* include DCE6 register header files */
#include "dce/dce_6_0_d.h"
#include "dce/dce_6_0_sh_mask.h"
+#define DC_LOGGER_INIT()
+
/*******************************************************************************
* Private definitions
******************************************************************************/
/***************************PIPE_CONTROL***********************************/
+/*
+ * Check if FBC can be enabled
+ */
+static bool dce60_should_enable_fbc(struct dc *dc,
+ struct dc_state *context,
+ uint32_t *pipe_idx)
+{
+ uint32_t i;
+ struct pipe_ctx *pipe_ctx = NULL;
+ struct resource_context *res_ctx = &context->res_ctx;
+ unsigned int underlay_idx = dc->res_pool->underlay_pipe_index;
+
+
+ ASSERT(dc->fbc_compressor);
+
+ /* FBC memory should be allocated */
+ if (!dc->ctx->fbc_gpu_addr)
+ return false;
+
+ /* Only supports single display */
+ if (context->stream_count != 1)
+ return false;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ if (res_ctx->pipe_ctx[i].stream) {
+
+ pipe_ctx = &res_ctx->pipe_ctx[i];
+
+ if (!pipe_ctx)
+ continue;
+
+ /* fbc not applicable on underlay pipe */
+ if (pipe_ctx->pipe_idx != underlay_idx) {
+ *pipe_idx = i;
+ break;
+ }
+ }
+ }
+
+ if (i == dc->res_pool->pipe_count)
+ return false;
+
+ if (!pipe_ctx->stream->link)
+ return false;
+
+ /* Only supports eDP */
+ if (pipe_ctx->stream->link->connector_signal != SIGNAL_TYPE_EDP)
+ return false;
+
+ /* PSR should not be enabled */
+ if (pipe_ctx->stream->link->psr_settings.psr_feature_enabled)
+ return false;
+
+ /* Nothing to compress */
+ if (!pipe_ctx->plane_state)
+ return false;
+
+ /* Only for non-linear tiling */
+ if (pipe_ctx->plane_state->tiling_info.gfx8.array_mode == DC_ARRAY_LINEAR_GENERAL)
+ return false;
+
+ return true;
+}
+
+/*
+ * Enable FBC
+ */
+static void dce60_enable_fbc(
+ struct dc *dc,
+ struct dc_state *context)
+{
+ uint32_t pipe_idx = 0;
+
+ if (dce60_should_enable_fbc(dc, context, &pipe_idx)) {
+ /* Program GRPH COMPRESSED ADDRESS and PITCH */
+ struct compr_addr_and_pitch_params params = {0, 0, 0};
+ struct compressor *compr = dc->fbc_compressor;
+ struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[pipe_idx];
+
+ params.source_view_width = pipe_ctx->stream->timing.h_addressable;
+ params.source_view_height = pipe_ctx->stream->timing.v_addressable;
+ params.inst = pipe_ctx->stream_res.tg->inst;
+ compr->compr_surface_address.quad_part = dc->ctx->fbc_gpu_addr;
+
+ compr->funcs->surface_address_and_pitch(compr, ¶ms);
+ compr->funcs->set_fbc_invalidation_triggers(compr, 1);
+
+ compr->funcs->enable_fbc(compr, ¶ms);
+ }
+}
+
+
+/*******************************************************************************
+ * Front End programming
+ ******************************************************************************/
+
+static void dce60_set_default_colors(struct pipe_ctx *pipe_ctx)
+{
+ struct default_adjustment default_adjust = { 0 };
+
+ default_adjust.force_hw_default = false;
+ default_adjust.in_color_space = pipe_ctx->plane_state->color_space;
+ default_adjust.out_color_space = pipe_ctx->stream->output_color_space;
+ default_adjust.csc_adjust_type = GRAPHICS_CSC_ADJUST_TYPE_SW;
+ default_adjust.surface_pixel_format = pipe_ctx->plane_res.scl_data.format;
+
+ /* display color depth */
+ default_adjust.color_depth =
+ pipe_ctx->stream->timing.display_color_depth;
+
+ /* Lb color depth */
+ default_adjust.lb_color_depth = pipe_ctx->plane_res.scl_data.lb_params.depth;
+
+ pipe_ctx->plane_res.xfm->funcs->opp_set_csc_default(
+ pipe_ctx->plane_res.xfm, &default_adjust);
+}
+
+/*******************************************************************************
+ * In order to turn on surface we will program
+ * CRTC
+ *
+ * DCE6 has no bottom_pipe and no Blender HW
+ * We need to set 'blank_target' to false in order to turn on the display
+ *
+ * |-----------|------------|---------|
+ * |curr pipe | set_blank | |
+ * |Surface |blank_target| CRCT |
+ * |visibility | argument | |
+ * |-----------|------------|---------|
+ * | off | true | blank |
+ * | on | false | unblank |
+ * |-----------|------------|---------|
+ *
+ ******************************************************************************/
+static void dce60_program_surface_visibility(const struct dc *dc,
+ struct pipe_ctx *pipe_ctx)
+{
+ bool blank_target = false;
+
+ /* DCE6 has no bottom_pipe and no Blender HW */
+
+ if (!pipe_ctx->plane_state->visible)
+ blank_target = true;
+
+ /* DCE6 skip dce_set_blender_mode() but then proceed to 'unblank' CRTC */
+ pipe_ctx->stream_res.tg->funcs->set_blank(pipe_ctx->stream_res.tg, blank_target);
+
+}
+
+
+static void dce60_get_surface_visual_confirm_color(const struct pipe_ctx *pipe_ctx,
+ struct tg_color *color)
+{
+ uint32_t color_value = MAX_TG_COLOR_VALUE * (4 - pipe_ctx->stream_res.tg->inst) / 4;
+
+ switch (pipe_ctx->plane_res.scl_data.format) {
+ case PIXEL_FORMAT_ARGB8888:
+ /* set boarder color to red */
+ color->color_r_cr = color_value;
+ break;
+
+ case PIXEL_FORMAT_ARGB2101010:
+ /* set boarder color to blue */
+ color->color_b_cb = color_value;
+ break;
+ case PIXEL_FORMAT_420BPP8:
+ /* set boarder color to green */
+ color->color_g_y = color_value;
+ break;
+ case PIXEL_FORMAT_420BPP10:
+ /* set boarder color to yellow */
+ color->color_g_y = color_value;
+ color->color_r_cr = color_value;
+ break;
+ case PIXEL_FORMAT_FP16:
+ /* set boarder color to white */
+ color->color_r_cr = color_value;
+ color->color_b_cb = color_value;
+ color->color_g_y = color_value;
+ break;
+ default:
+ break;
+ }
+}
+
+static void dce60_program_scaler(const struct dc *dc,
+ const struct pipe_ctx *pipe_ctx)
+{
+ struct tg_color color = {0};
+
+ /* DCE6 skips DCN TOFPGA check for transform_set_pixel_storage_depth == NULL */
+
+ if (dc->debug.visual_confirm == VISUAL_CONFIRM_SURFACE)
+ dce60_get_surface_visual_confirm_color(pipe_ctx, &color);
+ else
+ color_space_to_black_color(dc,
+ pipe_ctx->stream->output_color_space,
+ &color);
+
+ pipe_ctx->plane_res.xfm->funcs->transform_set_pixel_storage_depth(
+ pipe_ctx->plane_res.xfm,
+ pipe_ctx->plane_res.scl_data.lb_params.depth,
+ &pipe_ctx->stream->bit_depth_params);
+
+ if (pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color) {
+ /*
+ * The way 420 is packed, 2 channels carry Y component, 1 channel
+ * alternate between Cb and Cr, so both channels need the pixel
+ * value for Y
+ */
+ if (pipe_ctx->stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420)
+ color.color_r_cr = color.color_g_y;
+
+ pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color(
+ pipe_ctx->stream_res.tg,
+ &color);
+ }
+
+ pipe_ctx->plane_res.xfm->funcs->transform_set_scaler(pipe_ctx->plane_res.xfm,
+ &pipe_ctx->plane_res.scl_data);
+}
+
+
+dce60_program_front_end_for_pipe(
+ struct dc *dc, struct pipe_ctx *pipe_ctx)
+{
+ struct mem_input *mi = pipe_ctx->plane_res.mi;
+ struct dc_plane_state *plane_state = pipe_ctx->plane_state;
+ struct xfm_grph_csc_adjustment adjust;
+ struct out_csc_color_matrix tbl_entry;
+ unsigned int i;
+ struct dce_hwseq *hws = dc->hwseq;
+
+ DC_LOGGER_INIT();
+ memset(&tbl_entry, 0, sizeof(tbl_entry));
+
+ memset(&adjust, 0, sizeof(adjust));
+ adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_BYPASS;
+
+ dce_enable_fe_clock(dc->hwseq, mi->inst, true);
+
+ dce60_set_default_colors(pipe_ctx);
+ if (pipe_ctx->stream->csc_color_matrix.enable_adjustment
+ == true) {
+ tbl_entry.color_space =
+ pipe_ctx->stream->output_color_space;
+
+ for (i = 0; i < 12; i++)
+ tbl_entry.regval[i] =
+ pipe_ctx->stream->csc_color_matrix.matrix[i];
+
+ pipe_ctx->plane_res.xfm->funcs->opp_set_csc_adjustment
+ (pipe_ctx->plane_res.xfm, &tbl_entry);
+ }
+
+ if (pipe_ctx->stream->gamut_remap_matrix.enable_remap == true) {
+ adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_SW;
+
+ for (i = 0; i < CSC_TEMPERATURE_MATRIX_SIZE; i++)
+ adjust.temperature_matrix[i] =
+ pipe_ctx->stream->gamut_remap_matrix.matrix[i];
+ }
+
+ pipe_ctx->plane_res.xfm->funcs->transform_set_gamut_remap(pipe_ctx->plane_res.xfm, &adjust);
+
+ pipe_ctx->plane_res.scl_data.lb_params.alpha_en = pipe_ctx->bottom_pipe != 0;
+
+ dce60_program_scaler(dc, pipe_ctx);
+
+ mi->funcs->mem_input_program_surface_config(
+ mi,
+ plane_state->format,
+ &plane_state->tiling_info,
+ &plane_state->plane_size,
+ plane_state->rotation,
+ NULL,
+ false);
+ if (mi->funcs->set_blank)
+ mi->funcs->set_blank(mi, pipe_ctx->plane_state->visible);
+
+ if (dc->config.gpu_vm_support)
+ mi->funcs->mem_input_program_pte_vm(
+ pipe_ctx->plane_res.mi,
+ plane_state->format,
+ &plane_state->tiling_info,
+ plane_state->rotation);
+
+ /* Moved programming gamma from dc to hwss */
+ if (pipe_ctx->plane_state->update_flags.bits.full_update ||
+ pipe_ctx->plane_state->update_flags.bits.in_transfer_func_change ||
+ pipe_ctx->plane_state->update_flags.bits.gamma_change)
+ hws->funcs.set_input_transfer_func(dc, pipe_ctx, pipe_ctx->plane_state);
+
+ if (pipe_ctx->plane_state->update_flags.bits.full_update)
+ hws->funcs.set_output_transfer_func(dc, pipe_ctx, pipe_ctx->stream);
+
+ DC_LOG_SURFACE(
+ "Pipe:%d %p: addr hi:0x%x, "
+ "addr low:0x%x, "
+ "src: %d, %d, %d,"
+ " %d; dst: %d, %d, %d, %d;"
+ "clip: %d, %d, %d, %d\n",
+ pipe_ctx->pipe_idx,
+ (void *) pipe_ctx->plane_state,
+ pipe_ctx->plane_state->address.grph.addr.high_part,
+ pipe_ctx->plane_state->address.grph.addr.low_part,
+ pipe_ctx->plane_state->src_rect.x,
+ pipe_ctx->plane_state->src_rect.y,
+ pipe_ctx->plane_state->src_rect.width,
+ pipe_ctx->plane_state->src_rect.height,
+ pipe_ctx->plane_state->dst_rect.x,
+ pipe_ctx->plane_state->dst_rect.y,
+ pipe_ctx->plane_state->dst_rect.width,
+ pipe_ctx->plane_state->dst_rect.height,
+ pipe_ctx->plane_state->clip_rect.x,
+ pipe_ctx->plane_state->clip_rect.y,
+ pipe_ctx->plane_state->clip_rect.width,
+ pipe_ctx->plane_state->clip_rect.height);
+
+ DC_LOG_SURFACE(
+ "Pipe %d: width, height, x, y\n"
+ "viewport:%d, %d, %d, %d\n"
+ "recout: %d, %d, %d, %d\n",
+ pipe_ctx->pipe_idx,
+ pipe_ctx->plane_res.scl_data.viewport.width,
+ pipe_ctx->plane_res.scl_data.viewport.height,
+ pipe_ctx->plane_res.scl_data.viewport.x,
+ pipe_ctx->plane_res.scl_data.viewport.y,
+ pipe_ctx->plane_res.scl_data.recout.width,
+ pipe_ctx->plane_res.scl_data.recout.height,
+ pipe_ctx->plane_res.scl_data.recout.x,
+ pipe_ctx->plane_res.scl_data.recout.y);
+}
+
+static void dce60_apply_ctx_for_surface(
+ struct dc *dc,
+ const struct dc_stream_state *stream,
+ int num_planes,
+ struct dc_state *context)
+{
+ int i;
+
+ if (num_planes == 0)
+ return;
+
+ if (dc->fbc_compressor)
+ dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe_ctx->stream != stream)
+ continue;
+
+ /* Need to allocate mem before program front end for Fiji */
+ pipe_ctx->plane_res.mi->funcs->allocate_mem_input(
+ pipe_ctx->plane_res.mi,
+ pipe_ctx->stream->timing.h_total,
+ pipe_ctx->stream->timing.v_total,
+ pipe_ctx->stream->timing.pix_clk_100hz / 10,
+ context->stream_count);
+
+ dce60_program_front_end_for_pipe(dc, pipe_ctx);
+
+ dc->hwss.update_plane_addr(dc, pipe_ctx);
+
+ dce60_program_surface_visibility(dc, pipe_ctx);
+
+ }
+
+ if (dc->fbc_compressor)
+ dce60_enable_fbc(dc, context);
+}
+
void dce60_hw_sequencer_construct(struct dc *dc)
{
dce110_hw_sequencer_construct(dc);
dc->hwseq->funcs.enable_display_power_gating = dce100_enable_display_power_gating;
- dc->hwss.pipe_control_lock = dce_pipe_control_lock;
+ dc->hwss.apply_ctx_for_surface = dce60_apply_ctx_for_surface;
+ dc->hwss.pipe_control_lock = dce60_pipe_control_lock;
dc->hwss.prepare_bandwidth = dce100_prepare_bandwidth;
dc->hwss.optimize_bandwidth = dce100_optimize_bandwidth;
}
--
2.25.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
