[Why] DCE6 has no SMU_INTERRUPT_CONTROL register, but it's used for DCN10 and later [How] Add DCE6 specific macros definitions for DMCU registers and masks DCE6 DMCU macros will avoid buiding errors when using DCE6 headers There is no other change needed in dce_dcmu Signed-off-by: Mauro Rossi <issor.oruam@xxxxxxxxx> --- drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h b/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h index 5e044c2d3d6d..93e7f34d4775 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h @@ -46,6 +46,24 @@ SR(SMU_INTERRUPT_CONTROL), \ SR(DC_DMCU_SCRATCH) +#if defined(CONFIG_DRM_AMD_DC_SI) +#define DMCU_DCE60_REG_LIST() \ + SR(DMCU_CTRL), \ + SR(DMCU_STATUS), \ + SR(DMCU_RAM_ACCESS_CTRL), \ + SR(DMCU_IRAM_WR_CTRL), \ + SR(DMCU_IRAM_WR_DATA), \ + SR(MASTER_COMM_DATA_REG1), \ + SR(MASTER_COMM_DATA_REG2), \ + SR(MASTER_COMM_DATA_REG3), \ + SR(MASTER_COMM_CMD_REG), \ + SR(MASTER_COMM_CNTL_REG), \ + SR(DMCU_IRAM_RD_CTRL), \ + SR(DMCU_IRAM_RD_DATA), \ + SR(DMCU_INTERRUPT_TO_UC_EN_MASK), \ + SR(DC_DMCU_SCRATCH) +#endif + #define DMCU_DCE80_REG_LIST() \ SR(DMCU_CTRL), \ SR(DMCU_STATUS), \ @@ -104,6 +122,25 @@ STATIC_SCREEN4_INT_TO_UC_EN, mask_sh), \ DMCU_SF(SMU_INTERRUPT_CONTROL, DC_SMU_INT_ENABLE, mask_sh) +#if defined(CONFIG_DRM_AMD_DC_SI) +#define DMCU_MASK_SH_LIST_DCE60(mask_sh) \ + DMCU_SF(DMCU_CTRL, \ + DMCU_ENABLE, mask_sh), \ + DMCU_SF(DMCU_STATUS, \ + UC_IN_STOP_MODE, mask_sh), \ + DMCU_SF(DMCU_STATUS, \ + UC_IN_RESET, mask_sh), \ + DMCU_SF(DMCU_RAM_ACCESS_CTRL, \ + IRAM_HOST_ACCESS_EN, mask_sh), \ + DMCU_SF(DMCU_RAM_ACCESS_CTRL, \ + IRAM_WR_ADDR_AUTO_INC, mask_sh), \ + DMCU_SF(DMCU_RAM_ACCESS_CTRL, \ + IRAM_RD_ADDR_AUTO_INC, mask_sh), \ + DMCU_SF(MASTER_COMM_CMD_REG, \ + MASTER_COMM_CMD_REG_BYTE0, mask_sh), \ + DMCU_SF(MASTER_COMM_CNTL_REG, MASTER_COMM_INTERRUPT, mask_sh) +#endif + #define DMCU_MASK_SH_LIST_DCE80(mask_sh) \ DMCU_SF(DMCU_CTRL, \ DMCU_ENABLE, mask_sh), \ -- 2.25.1 _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
