[PATCH 04/11] drm/amd/display: Handle SMU msg response

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yongqiang Sun <yongqiang.sun@xxxxxxx>

[Why]
SMU may return error code to driver, but driver only check if response
is OK.

[How]
Check SMU response instead of reg_wait, assert in case of reponse isn't
OK.

Signed-off-by: Yongqiang Sun <yongqiang.sun@xxxxxxx>
Reviewed-by: Tony Cheng <Tony.Cheng@xxxxxxx>
Acked-by: Eryk Brol <eryk.brol@xxxxxxx>
---
 .../dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c  | 39 +++++++++++++++++-
 .../dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c   | 40 ++++++++++++++++++-
 2 files changed, 75 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
index c320b7af7d34..dbc7cde00433 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
@@ -26,6 +26,7 @@
 #include "core_types.h"
 #include "clk_mgr_internal.h"
 #include "reg_helper.h"
+#include <linux/delay.h>
 
 #define MAX_INSTANCE	5
 #define MAX_SEGMENT		5
@@ -68,10 +69,42 @@ static const struct IP_BASE MP1_BASE  = { { { { 0x00016000, 0, 0, 0, 0 } },
 #define VBIOSSMC_MSG_SetDispclkFreq           0x4
 #define VBIOSSMC_MSG_SetDprefclkFreq          0x5
 
+#define VBIOSSMC_Status_BUSY                      0x0
+#define VBIOSSMC_Result_OK                        0x1
+#define VBIOSSMC_Result_Failed                    0xFF
+#define VBIOSSMC_Result_UnknownCmd                0xFE
+#define VBIOSSMC_Result_CmdRejectedPrereq         0xFD
+#define VBIOSSMC_Result_CmdRejectedBusy           0xFC
+
+/*
+ * Function to be used instead of REG_WAIT macro because the wait ends when
+ * the register is NOT EQUAL to zero, and because the translation in msg_if.h
+ * won't work with REG_WAIT.
+ */
+static uint32_t rv1_smu_wait_for_response(struct clk_mgr_internal *clk_mgr, unsigned int delay_us, unsigned int max_retries)
+{
+	uint32_t res_val = VBIOSSMC_Status_BUSY;
+
+	do {
+		res_val = REG_READ(MP1_SMN_C2PMSG_91);
+		if (res_val != VBIOSSMC_Status_BUSY)
+			break;
+
+		if (delay_us >= 1000)
+			msleep(delay_us/1000);
+		else if (delay_us > 0)
+			udelay(delay_us);
+	} while (max_retries--);
+
+	return res_val;
+}
+
 int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param)
 {
+	uint32_t result;
+
 	/* First clear response register */
-	REG_WRITE(MP1_SMN_C2PMSG_91, 0);
+	REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Status_BUSY);
 
 	/* Set the parameter register for the SMU message, unit is Mhz */
 	REG_WRITE(MP1_SMN_C2PMSG_83, param);
@@ -79,7 +112,9 @@ int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned
 	/* Trigger the message transaction by writing the message ID */
 	REG_WRITE(MP1_SMN_C2PMSG_67, msg_id);
 
-	REG_WAIT(MP1_SMN_C2PMSG_91, CONTENT, 1, 10, 200000);
+	result = rv1_smu_wait_for_response(clk_mgr, 10, 1000);
+
+	ASSERT(result == VBIOSSMC_Result_OK);
 
 	/* Actual dispclk set is returned in the parameter register */
 	return REG_READ(MP1_SMN_C2PMSG_83);
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c
index 6878aedf1d3e..d2facbb114d3 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c
@@ -26,6 +26,7 @@
 #include "core_types.h"
 #include "clk_mgr_internal.h"
 #include "reg_helper.h"
+#include <linux/delay.h>
 
 #include "renoir_ip_offset.h"
 
@@ -53,10 +54,43 @@
 #define VBIOSSMC_MSG_EnableTmdp48MHzRefclkPwrDown 0xD
 #define VBIOSSMC_MSG_UpdatePmeRestore			  0xE
 
+#define VBIOSSMC_Status_BUSY                      0x0
+#define VBIOSSMC_Result_OK                        0x1
+#define VBIOSSMC_Result_Failed                    0xFF
+#define VBIOSSMC_Result_UnknownCmd                0xFE
+#define VBIOSSMC_Result_CmdRejectedPrereq         0xFD
+#define VBIOSSMC_Result_CmdRejectedBusy           0xFC
+
+/*
+ * Function to be used instead of REG_WAIT macro because the wait ends when
+ * the register is NOT EQUAL to zero, and because the translation in msg_if.h
+ * won't work with REG_WAIT.
+ */
+static uint32_t rn_smu_wait_for_response(struct clk_mgr_internal *clk_mgr, unsigned int delay_us, unsigned int max_retries)
+{
+	uint32_t res_val = VBIOSSMC_Status_BUSY;
+
+	do {
+		res_val = REG_READ(MP1_SMN_C2PMSG_91);
+		if (res_val != VBIOSSMC_Status_BUSY)
+			break;
+
+		if (delay_us >= 1000)
+			msleep(delay_us/1000);
+		else if (delay_us > 0)
+			udelay(delay_us);
+	} while (max_retries--);
+
+	return res_val;
+}
+
+
 int rn_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param)
 {
+	uint32_t result;
+
 	/* First clear response register */
-	REG_WRITE(MP1_SMN_C2PMSG_91, 0);
+	REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Status_BUSY);
 
 	/* Set the parameter register for the SMU message, unit is Mhz */
 	REG_WRITE(MP1_SMN_C2PMSG_83, param);
@@ -64,7 +98,9 @@ int rn_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned
 	/* Trigger the message transaction by writing the message ID */
 	REG_WRITE(MP1_SMN_C2PMSG_67, msg_id);
 
-	REG_WAIT(MP1_SMN_C2PMSG_91, CONTENT, 1, 10, 200000);
+	result = rn_smu_wait_for_response(clk_mgr, 10, 1000);
+
+	ASSERT(result == VBIOSSMC_Result_OK);
 
 	/* Actual dispclk set is returned in the parameter register */
 	return REG_READ(MP1_SMN_C2PMSG_83);
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux