Re: [RFC 02/17] dma-fence: basic lockdep annotations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 28, 2020 at 3:37 PM Thomas Hellström (Intel)
<thomas_os@xxxxxxxxxxxx> wrote:
>
> On 2020-05-12 10:59, Daniel Vetter wrote:
> > Design is similar to the lockdep annotations for workers, but with
> > some twists:
> >
> > - We use a read-lock for the execution/worker/completion side, so that
> >    this explicit annotation can be more liberally sprinkled around.
> >    With read locks lockdep isn't going to complain if the read-side
> >    isn't nested the same way under all circumstances, so ABBA deadlocks
> >    are ok. Which they are, since this is an annotation only.
> >
> > - We're using non-recursive lockdep read lock mode, since in recursive
> >    read lock mode lockdep does not catch read side hazards. And we
> >    _very_ much want read side hazards to be caught. For full details of
> >    this limitation see
> >
> >    commit e91498589746065e3ae95d9a00b068e525eec34f
> >    Author: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> >    Date:   Wed Aug 23 13:13:11 2017 +0200
> >
> >        locking/lockdep/selftests: Add mixed read-write ABBA tests
> >
> > - To allow nesting of the read-side explicit annotations we explicitly
> >    keep track of the nesting. lock_is_held() allows us to do that.
> >
> > - The wait-side annotation is a write lock, and entirely done within
> >    dma_fence_wait() for everyone by default.
> >
> > - To be able to freely annotate helper functions I want to make it ok
> >    to call dma_fence_begin/end_signalling from soft/hardirq context.
> >    First attempt was using the hardirq locking context for the write
> >    side in lockdep, but this forces all normal spinlocks nested within
> >    dma_fence_begin/end_signalling to be spinlocks. That bollocks.
> >
> >    The approach now is to simple check in_atomic(), and for these cases
> >    entirely rely on the might_sleep() check in dma_fence_wait(). That
> >    will catch any wrong nesting against spinlocks from soft/hardirq
> >    contexts.
> >
> > The idea here is that every code path that's critical for eventually
> > signalling a dma_fence should be annotated with
> > dma_fence_begin/end_signalling. The annotation ideally starts right
> > after a dma_fence is published (added to a dma_resv, exposed as a
> > sync_file fd, attached to a drm_syncobj fd, or anything else that
> > makes the dma_fence visible to other kernel threads), up to and
> > including the dma_fence_wait(). Examples are irq handlers, the
> > scheduler rt threads, the tail of execbuf (after the corresponding
> > fences are visible), any workers that end up signalling dma_fences and
> > really anything else. Not annotated should be code paths that only
> > complete fences opportunistically as the gpu progresses, like e.g.
> > shrinker/eviction code.
> >
> > The main class of deadlocks this is supposed to catch are:
> >
> > Thread A:
> >
> >       mutex_lock(A);
> >       mutex_unlock(A);
> >
> >       dma_fence_signal();
> >
> > Thread B:
> >
> >       mutex_lock(A);
> >       dma_fence_wait();
> >       mutex_unlock(A);
> >
> > Thread B is blocked on A signalling the fence, but A never gets around
> > to that because it cannot acquire the lock A.
> >
> > Note that dma_fence_wait() is allowed to be nested within
> > dma_fence_begin/end_signalling sections. To allow this to happen the
> > read lock needs to be upgraded to a write lock, which means that any
> > other lock is acquired between the dma_fence_begin_signalling() call and
> > the call to dma_fence_wait(), and still held, this will result in an
> > immediate lockdep complaint. The only other option would be to not
> > annotate such calls, defeating the point. Therefore these annotations
> > cannot be sprinkled over the code entirely mindless to avoid false
> > positives.
> >
> > v2: handle soft/hardirq ctx better against write side and dont forget
> > EXPORT_SYMBOL, drivers can't use this otherwise.
> >
> > Cc: linux-media@xxxxxxxxxxxxxxx
> > Cc: linaro-mm-sig@xxxxxxxxxxxxxxxx
> > Cc: linux-rdma@xxxxxxxxxxxxxxx
> > Cc: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > Cc: Christian König <christian.koenig@xxxxxxx>
> > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
>
> LGTM. Perhaps some in-code documentation on how to use the new functions
> are called.

See cover letter, that's going to be done for next round. For this one
here I just wanted to showcase a bit how it's used in a few different
places, mostly selected to get as much feedback from across different
drivers. Hence e.g. annotating drm/scheduler.

> Otherwise for patch 2 and 3,
>
> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@xxxxxxxxx>

I think I'll just cc you for the next round with docs, so you can make
sure it looks ok :-)
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux