With new L1 policy, some regs are blocked at guest and they are
programed at host side. So skip programing the regs under sriov.
the regs are:
GCMC_VM_FB_LOCATION_TOP
GCMC_VM_FB_LOCATION_BASE
MMMC_VM_FB_LOCATION_TOP
MMMC_VM_FB_LOCATION_BASE
GCMC_VM_SYSTEM_APERTURE_HIGH_ADDR
GCMC_VM_SYSTEM_APERTURE_LOW_ADDR
MMMC_VM_SYSTEM_APERTURE_HIGH_ADDR
MMMC_VM_SYSTEM_APERTURE_LOW_ADDR
HDP_NONSURFACE_BASE
HDP_NONSURFACE_BASE_HI
GCMC_VM_AGP_TOP
GCMC_VM_AGP_BOT
GCMC_VM_AGP_BASE
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/gfxhub_v2_0.c | 55 +++++++++++-------------
drivers/gpu/drm/amd/amdgpu/mmhub_v2_0.c | 29 ++++++-------
2 files changed, 37 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_0.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_0.c
index e0654a216ab5..cc866c367939 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_0.c
@@ -81,24 +81,31 @@ static void gfxhub_v2_0_init_system_aperture_regs(struct amdgpu_device *adev)
{
uint64_t value;
- /* Disable AGP. */
- WREG32_SOC15(GC, 0, mmGCMC_VM_AGP_BASE, 0);
- WREG32_SOC15(GC, 0, mmGCMC_VM_AGP_TOP, 0);
- WREG32_SOC15(GC, 0, mmGCMC_VM_AGP_BOT, 0x00FFFFFF);
-
- /* Program the system aperture low logical page number. */
- WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_LOW_ADDR,
- adev->gmc.vram_start >> 18);
- WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
- adev->gmc.vram_end >> 18);
-
- /* Set default page address. */
- value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start
- + adev->vm_manager.vram_base_offset;
- WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_LSB,
- (u32)(value >> 12));
- WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_MSB,
- (u32)(value >> 44));
+ if (!amdgpu_sriov_vf(adev)) {
+ /*
+ * the new L1 policy will block SRIOV guest from writing
+ * these regs, and they will be programed at host.
+ * so skip programing these regs.
+ */
+ /* Disable AGP. */
+ WREG32_SOC15(GC, 0, mmGCMC_VM_AGP_BASE, 0);
+ WREG32_SOC15(GC, 0, mmGCMC_VM_AGP_TOP, 0);
+ WREG32_SOC15(GC, 0, mmGCMC_VM_AGP_BOT, 0x00FFFFFF);
+
+ /* Program the system aperture low logical page number. */
+ WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ adev->gmc.vram_start >> 18);
+ WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ adev->gmc.vram_end >> 18);
+
+ /* Set default page address. */
+ value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start
+ + adev->vm_manager.vram_base_offset;
+ WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_LSB,
+ (u32)(value >> 12));
+ WREG32_SOC15(GC, 0, mmGCMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_MSB,
+ (u32)(value >> 44));
+ }
/* Program "protection fault". */
WREG32_SOC15(GC, 0, mmGCVM_L2_PROTECTION_FAULT_DEFAULT_ADDR_LO32,
@@ -260,18 +267,6 @@ static void gfxhub_v2_0_program_invalidation(struct amdgpu_device *adev)
int gfxhub_v2_0_gart_enable(struct amdgpu_device *adev)
{
- if (amdgpu_sriov_vf(adev)) {
- /*
- * GCMC_VM_FB_LOCATION_BASE/TOP is NULL for VF, becuase they are
- * VF copy registers so vbios post doesn't program them, for
- * SRIOV driver need to program them
- */
- WREG32_SOC15(GC, 0, mmGCMC_VM_FB_LOCATION_BASE,
- adev->gmc.vram_start >> 24);
- WREG32_SOC15(GC, 0, mmGCMC_VM_FB_LOCATION_TOP,
- adev->gmc.vram_end >> 24);
- }
-
/* GART Enable. */
gfxhub_v2_0_init_gart_aperture_regs(adev);
gfxhub_v2_0_init_system_aperture_regs(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v2_0.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v2_0.c
index bde189680521..fb3f228458e5 100644
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v2_0.c
@@ -72,11 +72,18 @@ static void mmhub_v2_0_init_system_aperture_regs(struct amdgpu_device *adev)
WREG32_SOC15(MMHUB, 0, mmMMMC_VM_AGP_TOP, 0);
WREG32_SOC15(MMHUB, 0, mmMMMC_VM_AGP_BOT, 0x00FFFFFF);
- /* Program the system aperture low logical page number. */
- WREG32_SOC15(MMHUB, 0, mmMMMC_VM_SYSTEM_APERTURE_LOW_ADDR,
- adev->gmc.vram_start >> 18);
- WREG32_SOC15(MMHUB, 0, mmMMMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
- adev->gmc.vram_end >> 18);
+ if (!amdgpu_sriov_vf(adev)) {
+ /*
+ * the new L1 policy will block SRIOV guest from writing
+ * these regs, and they will be programed at host.
+ * so skip programing these regs.
+ */
+ /* Program the system aperture low logical page number. */
+ WREG32_SOC15(MMHUB, 0, mmMMMC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ adev->gmc.vram_start >> 18);
+ WREG32_SOC15(MMHUB, 0, mmMMMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ adev->gmc.vram_end >> 18);
+ }
/* Set default page address. */
value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start +
@@ -247,18 +254,6 @@ static void mmhub_v2_0_program_invalidation(struct amdgpu_device *adev)
int mmhub_v2_0_gart_enable(struct amdgpu_device *adev)
{
- if (amdgpu_sriov_vf(adev)) {
- /*
- * MMMC_VM_FB_LOCATION_BASE/TOP is NULL for VF, becuase they are
- * VF copy registers so vbios post doesn't program them, for
- * SRIOV driver need to program them
- */
- WREG32_SOC15(MMHUB, 0, mmMMMC_VM_FB_LOCATION_BASE,
- adev->gmc.vram_start >> 24);
- WREG32_SOC15(MMHUB, 0, mmMMMC_VM_FB_LOCATION_TOP,
- adev->gmc.vram_end >> 24);
- }
-
/* GART Enable. */
mmhub_v2_0_init_gart_aperture_regs(adev);
mmhub_v2_0_init_system_aperture_regs(adev);
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
