[PATCH 03/35] drm/amd/display: Update TX masks correctly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alvin Lee <alvin.lee2@xxxxxxx>

[Why]
Bugs occur when TX interrupt comes in when no USB-C on board.

[How]
Check PHY for USB-C before enabling TX interrupt in DMCU FW.

Signed-off-by: Alvin Lee <alvin.lee2@xxxxxxx>
Reviewed-by: Jun Lei <Jun.Lei@xxxxxxx>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
Acked-by: Harry Wentland <harry.wentland@xxxxxxx>
---
 drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c b/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c
index 30d953acd016..f0cebe721bcc 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c
@@ -378,6 +378,11 @@ static bool dcn10_dmcu_init(struct dmcu *dmcu)
 	struct dce_dmcu *dmcu_dce = TO_DCE_DMCU(dmcu);
 	const struct dc_config *config = &dmcu->ctx->dc->config;
 	bool status = false;
+	struct dc_context *ctx = dmcu->ctx;
+	unsigned int i;
+	//  5 4 3 2 1 0
+	//  F E D C B A - bit 0 is A, bit 5 is F
+	unsigned int tx_interrupt_mask = 0;
 
 	PERF_TRACE();
 	/*  Definition of DC_DMCU_SCRATCH
@@ -387,6 +392,15 @@ static bool dcn10_dmcu_init(struct dmcu *dmcu)
 	 */
 	dmcu->dmcu_state = REG_READ(DC_DMCU_SCRATCH);
 
+	for (i = 0; i < ctx->dc->link_count; i++) {
+		if (ctx->dc->links[i]->link_enc->features.flags.bits.DP_IS_USB_C) {
+			if (ctx->dc->links[i]->link_enc->transmitter >= TRANSMITTER_UNIPHY_A &&
+					ctx->dc->links[i]->link_enc->transmitter <= TRANSMITTER_UNIPHY_F) {
+				tx_interrupt_mask |= 1 << ctx->dc->links[i]->link_enc->transmitter;
+			}
+		}
+	}
+
 	switch (dmcu->dmcu_state) {
 	case DMCU_UNLOADED:
 		status = false;
@@ -401,6 +415,8 @@ static bool dcn10_dmcu_init(struct dmcu *dmcu)
 		/* Set backlight ramping stepsize */
 		REG_WRITE(MASTER_COMM_DATA_REG2, abm_gain_stepsize);
 
+		REG_WRITE(MASTER_COMM_DATA_REG3, tx_interrupt_mask);
+
 		/* Set command to initialize microcontroller */
 		REG_UPDATE(MASTER_COMM_CMD_REG, MASTER_COMM_CMD_REG_BYTE0,
 			MCP_INIT_DMCU);
-- 
2.25.0

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux