[PATCH 33/33] drm/amd/display: turn off the mst hub before we do detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Joseph Gravenor <joseph.gravenor@xxxxxxx>

[why]
not turning off the mst hub before detection on reboot
causes us to not be able to light up displays with mst hook

[how]
on hw init, see if any displays are lit up. if so, turn them off

Signed-off-by: Joseph Gravenor <joseph.gravenor@xxxxxxx>
Reviewed-by: Eric Yang <eric.yang2@xxxxxxx>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@xxxxxxx>
---
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 22 +++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 0225f8d8bb82..42fcfee2c31b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -48,8 +48,8 @@
 #include "dc_link_dp.h"
 #include "dccg.h"
 #include "clk_mgr.h"
-
-
+#include "link_hwss.h"
+#include "dpcd_defs.h"
 #include "dsc.h"
 
 #define DC_LOGGER_INIT(logger)
@@ -1322,6 +1322,24 @@ void dcn10_init_hw(struct dc *dc)
 		if (hws->funcs.dsc_pg_control != NULL)
 			hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false);
 
+	/* we want to turn off all dp displays before doing detection */
+	if (dc->config.power_down_display_on_boot) {
+		uint8_t dpcd_power_state = '\0';
+		enum dc_status status = DC_ERROR_UNEXPECTED;
+
+		for (i = 0; i < dc->link_count; i++) {
+			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT) {
+				continue;
+			}
+			/* if any of the displays are lit up turn them off */
+			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+						     &dpcd_power_state, sizeof(dpcd_power_state));
+			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+				dp_receiver_power_ctrl(dc->links[i], false);
+			}
+		}
+	}
+
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
 	 * pipes we want to use.
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux