It should work on all Raven variants, but some users have
reported issues with original Raven with IOMMU enabled.
So far there have been no issues observed with PCO or RV2.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 22 ++++++++++++++-----
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 18 ++++++++++-----
2 files changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index 4e699071d144..6d520a3eec40 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -513,13 +513,23 @@ uint32_t amdgpu_display_supported_domains(struct amdgpu_device *adev,
* will not allow USWC mappings.
* Also, don't allow GTT domain if the BO doens't have USWC falg set.
*/
- if (adev->asic_type >= CHIP_CARRIZO &&
- adev->asic_type < CHIP_RAVEN &&
- (adev->flags & AMD_IS_APU) &&
- (bo_flags & AMDGPU_GEM_CREATE_CPU_GTT_USWC) &&
+ if ((bo_flags & AMDGPU_GEM_CREATE_CPU_GTT_USWC) &&
amdgpu_bo_support_uswc(bo_flags) &&
- amdgpu_device_asic_has_dc_support(adev->asic_type))
- domain |= AMDGPU_GEM_DOMAIN_GTT;
+ amdgpu_device_asic_has_dc_support(adev->asic_type)) {
+ switch (adev->asic_type) {
+ case CHIP_CARRIZO:
+ case CHIP_STONEY:
+ domain |= AMDGPU_GEM_DOMAIN_GTT;
+ break;
+ case CHIP_RAVEN:
+ /* enable S/G on PCO and RV2 */
+ if (adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8)
+ domain |= AMDGPU_GEM_DOMAIN_GTT;
+ break;
+ default:
+ break;
+ }
+ }
#endif
return domain;
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index b998b0382477..05118c8860f9 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -906,13 +906,19 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
init_data.dce_environment = DCE_ENV_PRODUCTION_DRV;
- /*
- * TODO debug why this doesn't work on Raven
- */
- if (adev->flags & AMD_IS_APU &&
- adev->asic_type >= CHIP_CARRIZO &&
- adev->asic_type < CHIP_RAVEN)
+ switch (adev->asic_type) {
+ case CHIP_CARRIZO:
+ case CHIP_STONEY:
init_data.flags.gpu_vm_support = true;
+ break;
+ case CHIP_RAVEN:
+ /* enable S/G on PCO and RV2 */
+ if (adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8)
+ init_data.flags.gpu_vm_support = true;
+ break;
+ default:
+ break;
+ }
if (amdgpu_dc_feature_mask & DC_FBC_MASK)
init_data.flags.fbc_support = true;
--
2.24.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
