[PATCH 1/2] amd/amdgpu/sriov enable onevf mode for ARCTURUS VF

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Before, initialization of smu ip block would be skipped
for sriov ASICs. But if there's only one VF being used,
guest driver should be able to dump some HW info such as
clks, temperature,etc.

To solve this, now after onevf mode is enabled, host
driver will notify guest. If it's onevf mode, guest will
do smu hw_init and skip some steps in normal smu hw_init
flow because host driver has already done it for smu.

With this fix, guest app can talk with smu and dump hw
information from smu.

v2: refine the logic for pm_enabled.Skip hw_init by not
changing pm_enabled.

Signed-off-by: Jack Zhang <Jack.Zhang1@xxxxxxx>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c    |  3 +-
 drivers/gpu/drm/amd/amdgpu/soc15.c         |  3 +-
 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 94 +++++++++++++++++-------------
 3 files changed, 56 insertions(+), 44 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 0d842a1..5341905 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -1454,7 +1454,8 @@ static int psp_np_fw_load(struct psp_context *psp)
                     || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_G
 	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL
 	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_GPM_MEM
-	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM))
+	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM
+	            || ucode->ucode_id == AMDGPU_UCODE_ID_SMC))
 			/*skip ucode loading in SRIOV VF */
 			continue;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index 6129fab..26e1c8c 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -826,8 +826,7 @@ int soc15_set_ip_blocks(struct amdgpu_device *adev)
 			amdgpu_device_ip_block_add(adev, &dce_virtual_ip_block);
 		amdgpu_device_ip_block_add(adev, &gfx_v9_0_ip_block);
 		amdgpu_device_ip_block_add(adev, &sdma_v4_0_ip_block);
-		if (!amdgpu_sriov_vf(adev))
-			amdgpu_device_ip_block_add(adev, &smu_v11_0_ip_block);
+		amdgpu_device_ip_block_add(adev, &smu_v11_0_ip_block);
 
 		if (unlikely(adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT))
 			amdgpu_device_ip_block_add(adev, &vcn_v2_5_ip_block);
diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index 4ed8bdc..fa17265 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -531,10 +531,14 @@ bool is_support_sw_smu(struct amdgpu_device *adev)
 	if (adev->asic_type == CHIP_VEGA20)
 		return (amdgpu_dpm == 2) ? true : false;
 	else if (adev->asic_type >= CHIP_ARCTURUS) {
-		if (amdgpu_sriov_vf(adev))
-			return false;
-		else
+		if (amdgpu_sriov_vf(adev)) {
+			if(amdgpu_sriov_is_pp_one_vf(adev))
+				return true;
+			else
+				return false;
+		} else {
 			return true;
+		}
 	} else
 		return false;
 }
@@ -1061,20 +1065,19 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
 	}
 
 	/* smu_dump_pptable(smu); */
+	if (!amdgpu_sriov_vf(adev)) {
+		/*
+		 * Copy pptable bo in the vram to smc with SMU MSGs such as
+		 * SetDriverDramAddr and TransferTableDram2Smu.
+		 */
+		ret = smu_write_pptable(smu);
+		if (ret)
+			return ret;
 
-	/*
-	 * Copy pptable bo in the vram to smc with SMU MSGs such as
-	 * SetDriverDramAddr and TransferTableDram2Smu.
-	 */
-	ret = smu_write_pptable(smu);
-	if (ret)
-		return ret;
-
-	/* issue Run*Btc msg */
-	ret = smu_run_btc(smu);
-	if (ret)
-		return ret;
-
+		/* issue Run*Btc msg */
+		ret = smu_run_btc(smu);
+		if (ret)
+			return ret;
 	ret = smu_feature_set_allowed_mask(smu);
 	if (ret)
 		return ret;
@@ -1082,7 +1085,7 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
 	ret = smu_system_features_control(smu, true);
 	if (ret)
 		return ret;
-
+	}
 	if (adev->asic_type != CHIP_ARCTURUS) {
 		ret = smu_notify_display_change(smu);
 		if (ret)
@@ -1135,8 +1138,9 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
 	/*
 	 * Set PMSTATUSLOG table bo address with SetToolsDramAddr MSG for tools.
 	 */
-	ret = smu_set_tool_table_location(smu);
-
+	if (!amdgpu_sriov_vf(adev)) {
+		ret = smu_set_tool_table_location(smu);
+	}
 	if (!smu_is_dpm_running(smu))
 		pr_info("dpm has been disabled\n");
 
@@ -1248,6 +1252,9 @@ static int smu_hw_init(void *handle)
 		smu_set_gfx_cgpg(&adev->smu, true);
 	}
 
+	if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev))
+		return 0;
+
 	if (!smu->pm_enabled)
 		return 0;
 
@@ -1300,37 +1307,42 @@ static int smu_hw_fini(void *handle)
 	struct smu_table_context *table_context = &smu->smu_table;
 	int ret = 0;
 
+	if (amdgpu_sriov_vf(adev)&& !amdgpu_sriov_is_pp_one_vf(adev))
+		return 0;
+
 	if (adev->flags & AMD_IS_APU) {
 		smu_powergate_sdma(&adev->smu, true);
 		smu_powergate_vcn(&adev->smu, true);
 		smu_powergate_jpeg(&adev->smu, true);
 	}
 
-	ret = smu_stop_thermal_control(smu);
-	if (ret) {
-		pr_warn("Fail to stop thermal control!\n");
-		return ret;
-	}
-
-	/*
-	 * For custom pptable uploading, skip the DPM features
-	 * disable process on Navi1x ASICs.
-	 *   - As the gfx related features are under control of
-	 *     RLC on those ASICs. RLC reinitialization will be
-	 *     needed to reenable them. That will cost much more
-	 *     efforts.
-	 *
-	 *   - SMU firmware can handle the DPM reenablement
-	 *     properly.
-	 */
-	if (!smu->uploading_custom_pp_table ||
-	    !((adev->asic_type >= CHIP_NAVI10) &&
-	      (adev->asic_type <= CHIP_NAVI12))) {
-		ret = smu_stop_dpms(smu);
+	if (!amdgpu_sriov_vf(adev)){
+		ret = smu_stop_thermal_control(smu);
 		if (ret) {
-			pr_warn("Fail to stop Dpms!\n");
+			pr_warn("Fail to stop thermal control!\n");
 			return ret;
 		}
+
+		/*
+		 * For custom pptable uploading, skip the DPM features
+		 * disable process on Navi1x ASICs.
+		 *   - As the gfx related features are under control of
+		 *     RLC on those ASICs. RLC reinitialization will be
+		 *     needed to reenable them. That will cost much more
+		 *     efforts.
+		 *
+		 *   - SMU firmware can handle the DPM reenablement
+		 *     properly.
+		 */
+		if (!smu->uploading_custom_pp_table ||
+				!((adev->asic_type >= CHIP_NAVI10) &&
+					(adev->asic_type <= CHIP_NAVI12))) {
+			ret = smu_stop_dpms(smu);
+			if (ret) {
+				pr_warn("Fail to stop Dpms!\n");
+				return ret;
+			}
+		}
 	}
 
 	kfree(table_context->driver_pptable);
-- 
2.7.4

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux