[AMD Official Use Only - Internal Distribution Only]
On Thu, Dec 19, 2019 at 03:04:12PM +0800, Dai, Yuxian (David) wrote:
> For we don't support the mode, so shouldn't print the error message, or regard as a error.
> For log message, the error is high level .maybe change from "error" to "warning" , it will be much better.
>
>
> -----Original Message-----
> From: Liang, Prike <Prike.Liang@xxxxxxx>
> Sent: Thursday, December 19, 2019 2:46 PM
> To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Quan, Evan <Evan.Quan@xxxxxxx>; Huang, Ray <Ray.Huang@xxxxxxx>; Dai, Yuxian (David) <Yuxian.Dai@xxxxxxx>; Liang, Prike <Prike.Liang@xxxxxxx>
> Subject: [PATCH] drm/amd/powerplay: suppress nonsupport profile mode overrun message
>
> SMU12 not support WORKLOAD_DEFAULT_BIT and WORKLOAD_PPLIB_POWER_SAVING_BIT.
>
Probably smu firmware doesn't expose the feature mask to driver. Can you
confirmware with smu firmware guy whehter this feature is really disabled
or not in SMU12. If that, in my view, issue the message
SMU_MSG_SetWorkloadMask with an unsupported state, it doesn't make sense.
Just work around this with one time warnning is not a good solution.
Thanks,
Ray
> Signed-off-by: Prike Liang <Prike.Liang@xxxxxxx>
> ---
> drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
> index 784903a3..f9a1817 100644
> --- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
> +++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
> @@ -550,14 +550,18 @@ static int renoir_set_power_profile_mode(struct smu_context *smu, long *input, u
> /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */
> workload_type = smu_workload_get_type(smu, smu->power_profile_mode);
> if (workload_type < 0) {
> - pr_err("Unsupported power profile mode %d on RENOIR\n",smu->power_profile_mode);
> + /*
> + * TODO: If some case need switch to powersave/default power mode
> + * then can consider enter WORKLOAD_COMPUTE/WORKLOAD_CUSTOM for power saving.
> + */
> + pr_err_once("Unsupported power profile mode %d on RENOIR\n",smu->power_profile_mode);
> return -EINVAL;
> }
>
> ret = smu_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask,
> 1 << workload_type);
> if (ret) {
> - pr_err("Fail to set workload type %d\n", workload_type);
> + pr_err_once("Fail to set workload type %d\n", workload_type);
> return ret;
> }
>
> --
> 2.7.4
>
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
