[PATCH 2/2] drm/amdgpu: attempt xgmi perfmon re-arm on failed arm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The DF routines to arm xGMI performance will attempt to re-arm both on
performance monitoring start and read on initial failure to arm.

Signed-off-by: Jonathan Kim <Jonathan.Kim@xxxxxxx>
---
 drivers/gpu/drm/amd/amdgpu/df_v3_6.c | 153 ++++++++++++++++++++-------
 1 file changed, 117 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/df_v3_6.c b/drivers/gpu/drm/amd/amdgpu/df_v3_6.c
index 4043ebcea5de..af445054305f 100644
--- a/drivers/gpu/drm/amd/amdgpu/df_v3_6.c
+++ b/drivers/gpu/drm/amd/amdgpu/df_v3_6.c
@@ -162,25 +162,45 @@ static void df_v3_6_perfmon_rreg(struct amdgpu_device *adev,
 }
 
 /*
- * df_v3_6_perfmon_wreg - write to perfmon lo and hi
- *
- * required to be atomic.  no mmio method provided so subsequent reads after
- * data writes cannot occur to preserve data fabrics finite state machine.
+ * retry arming counters every 100 usecs within 1 millisecond interval.
+ * if retry fails after time out, return error.
  */
-static void df_v3_6_perfmon_wreg(struct amdgpu_device *adev, uint32_t lo_addr,
-			    uint32_t lo_val, uint32_t hi_addr, uint32_t hi_val)
+#define ARM_RETRY_USEC_TIMEOUT	1000
+#define ARM_RETRY_USEC_INTERVAL	100
+static int df_v3_6_perfmon_arm_with_retry(struct amdgpu_device *adev,
+					  uint32_t lo_addr, uint32_t lo_val,
+					  uint32_t hi_addr, uint32_t  hi_val)
 {
 	unsigned long flags, address, data;
+	uint32_t lo_val_rb, hi_val_rb;
+	int countdown = ARM_RETRY_USEC_TIMEOUT;
 
 	address = adev->nbio.funcs->get_pcie_index_offset(adev);
 	data = adev->nbio.funcs->get_pcie_data_offset(adev);
 
 	spin_lock_irqsave(&adev->pcie_idx_lock, flags);
-	WREG32(address, lo_addr);
-	WREG32(data, lo_val);
-	WREG32(address, hi_addr);
-	WREG32(data, hi_val);
+
+	while (countdown) {
+		WREG32(address, lo_addr);
+		WREG32(data, lo_val);
+		WREG32(address, hi_addr);
+		WREG32(data, hi_val);
+
+		WREG32(address, lo_addr);
+		lo_val_rb = RREG32(data);
+		WREG32(address, hi_addr);
+		hi_val_rb = RREG32(data);
+
+		if (lo_val == lo_val_rb && hi_val == hi_val_rb)
+			break;
+
+		countdown -= ARM_RETRY_USEC_INTERVAL;
+		udelay(ARM_RETRY_USEC_INTERVAL);
+	}
+
 	spin_unlock_irqrestore(&adev->pcie_idx_lock, flags);
+
+	return countdown > 0 ? 0 : -ETIME;
 }
 
 /* get the number of df counters available */
@@ -334,20 +354,20 @@ static void df_v3_6_pmc_get_addr(struct amdgpu_device *adev,
 	switch (target_cntr) {
 
 	case 0:
-		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo0 : smnPerfMonCtrLo0;
-		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi0 : smnPerfMonCtrHi0;
+		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo4 : smnPerfMonCtrLo4;
+		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi4 : smnPerfMonCtrHi4;
 		break;
 	case 1:
-		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo1 : smnPerfMonCtrLo1;
-		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi1 : smnPerfMonCtrHi1;
+		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo5 : smnPerfMonCtrLo5;
+		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi5 : smnPerfMonCtrHi5;
 		break;
 	case 2:
-		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo2 : smnPerfMonCtrLo2;
-		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi2 : smnPerfMonCtrHi2;
+		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo6 : smnPerfMonCtrLo6;
+		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi6 : smnPerfMonCtrHi6;
 		break;
 	case 3:
-		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo3 : smnPerfMonCtrLo3;
-		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi3 : smnPerfMonCtrHi3;
+		*lo_base_addr = is_ctrl ? smnPerfMonCtlLo7 : smnPerfMonCtrLo7;
+		*hi_base_addr = is_ctrl ? smnPerfMonCtlHi7 : smnPerfMonCtrHi7;
 		break;
 
 	}
@@ -422,6 +442,42 @@ static int df_v3_6_pmc_add_cntr(struct amdgpu_device *adev,
 	return -ENOSPC;
 }
 
+#define DEFERRED_ARM_MASK	(1 << 31)
+static int df_v3_6_pmc_defer_cntr(struct amdgpu_device *adev,
+				  uint64_t config, int err)
+{
+	int target_cntr;
+
+	target_cntr = df_v3_6_pmc_config_2_cntr(adev, config);
+
+	if (target_cntr < 0)
+		return -EINVAL;
+
+	if (err)
+		adev->df_perfmon_config_assign_mask[target_cntr] |=
+							DEFERRED_ARM_MASK;
+	else
+		adev->df_perfmon_config_assign_mask[target_cntr] &=
+							~DEFERRED_ARM_MASK;
+
+	return 0;
+}
+
+static bool df_v3_6_pmc_is_deferred(struct amdgpu_device *adev,
+				    uint64_t config)
+{
+	int target_cntr;
+
+	target_cntr = df_v3_6_pmc_config_2_cntr(adev, config);
+
+	if (target_cntr < 0)
+		return -EINVAL;
+
+	return (adev->df_perfmon_config_assign_mask[target_cntr]
+							& DEFERRED_ARM_MASK);
+
+}
+
 /* release performance counter */
 static void df_v3_6_pmc_release_cntr(struct amdgpu_device *adev,
 				     uint64_t config)
@@ -433,7 +489,7 @@ static void df_v3_6_pmc_release_cntr(struct amdgpu_device *adev,
 }
 
 
-static void df_v3_6_reset_perfmon_cntr(struct amdgpu_device *adev,
+static int df_v3_6_reset_perfmon_cntr(struct amdgpu_device *adev,
 					 uint64_t config)
 {
 	uint32_t lo_base_addr, hi_base_addr;
@@ -442,38 +498,54 @@ static void df_v3_6_reset_perfmon_cntr(struct amdgpu_device *adev,
 				      &hi_base_addr);
 
 	if ((lo_base_addr == 0) || (hi_base_addr == 0))
-		return;
+		return -EINVAL;
 
-	df_v3_6_perfmon_wreg(adev, lo_base_addr, 0, hi_base_addr, 0);
+	return df_v3_6_perfmon_arm_with_retry(adev, lo_base_addr, 0,
+					      hi_base_addr, 0);
 }
 
 static int df_v3_6_pmc_start(struct amdgpu_device *adev, uint64_t config,
 			     int is_enable)
 {
 	uint32_t lo_base_addr, hi_base_addr, lo_val, hi_val;
-	int ret = 0;
+	int err = 0, ret = 0;
 
 	switch (adev->asic_type) {
 	case CHIP_VEGA20:
-
-		df_v3_6_reset_perfmon_cntr(adev, config);
-
 		if (is_enable) {
 			ret = df_v3_6_pmc_add_cntr(adev, config);
-		} else {
-			ret = df_v3_6_pmc_get_ctrl_settings(adev,
+			return ret;
+		}
+
+		err = df_v3_6_reset_perfmon_cntr(adev, config);
+
+		ret = df_v3_6_pmc_defer_cntr(adev, config, err);
+
+		if (err || ret)
+			return ret;
+
+		ret = df_v3_6_pmc_get_ctrl_settings(adev,
 					config,
 					&lo_base_addr,
 					&hi_base_addr,
 					&lo_val,
 					&hi_val);
 
-			if (ret)
-				return ret;
+		if (ret)
+			return ret;
 
-			df_v3_6_perfmon_wreg(adev, lo_base_addr, lo_val,
-					hi_base_addr, hi_val);
-		}
+		/*
+		 * if arm with retries fail, mark reserved counter high bit to
+		 * indicate that event arm has failed.  retry will occur
+		 * during pmc_count in this case.
+		 */
+		err = df_v3_6_perfmon_arm_with_retry(adev,
+						     lo_base_addr,
+						     lo_val,
+						     hi_base_addr,
+						     hi_val);
+
+		ret = df_v3_6_pmc_defer_cntr(adev, config, err);
 
 		break;
 	default:
@@ -501,7 +573,7 @@ static int df_v3_6_pmc_stop(struct amdgpu_device *adev, uint64_t config,
 		if (ret)
 			return ret;
 
-		df_v3_6_perfmon_wreg(adev, lo_base_addr, 0, hi_base_addr, 0);
+		df_v3_6_reset_perfmon_cntr(adev, config);
 
 		if (is_disable)
 			df_v3_6_pmc_release_cntr(adev, config);
@@ -518,18 +590,28 @@ static void df_v3_6_pmc_get_count(struct amdgpu_device *adev,
 				  uint64_t config,
 				  uint64_t *count)
 {
-	uint32_t lo_base_addr, hi_base_addr, lo_val, hi_val;
+	uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
+	int rearm_err = 0;
 	*count = 0;
 
 	switch (adev->asic_type) {
 	case CHIP_VEGA20:
-
 		df_v3_6_pmc_get_read_settings(adev, config, &lo_base_addr,
 				      &hi_base_addr);
 
 		if ((lo_base_addr == 0) || (hi_base_addr == 0))
 			return;
 
+		/* rearm the counter or throw away count value on failure */
+		if (df_v3_6_pmc_is_deferred(adev, config)) {
+			rearm_err = df_v3_6_perfmon_arm_with_retry(
+						adev, lo_base_addr, lo_val,
+						hi_base_addr, hi_val);
+		}
+
+		if (rearm_err)
+			return;
+
 		df_v3_6_perfmon_rreg(adev, lo_base_addr, &lo_val,
 				hi_base_addr, &hi_val);
 
@@ -542,7 +624,6 @@ static void df_v3_6_pmc_get_count(struct amdgpu_device *adev,
 			 config, lo_base_addr, hi_base_addr, lo_val, hi_val);
 
 		break;
-
 	default:
 		break;
 	}
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux