----- Original Message ----- > From: "Felix Kuehling" <felix.kuehling@xxxxxxx> > To: "Timothy Pearson" <tpearson@xxxxxxxxxxxxxxxxxxxxx>, "amd-gfx" <amd-gfx@xxxxxxxxxxxxxxxxxxxxx> > Sent: Monday, November 25, 2019 11:07:31 AM > Subject: Re: [PATCH 1/1] amdgpu: Enable KFD on POWER systems > Hi Timothy, > > Thank you for the patch and for confirming that it works. We did some > experimental work on Power8 a few years ago. I see that Talos II is Power9. > > At the time we were working on Power8 we had to add some #ifdef > CONFIG_ACPI guards around some ACPI-specific code in KFD. Do you know to > what extent ACPI is available and working on the Power architecture? > > Another problem we ran into with Power, is the physical address map. > System memory can be a physical addresses outside the range accessible > by the GPU. Vega has 44-bit physical addressing. Older Polaris GPUs only > have 40-bits. Did you run into any such problems? Do you need an IOMMU > to make system memory accessible to the GPU? > > Regards, > Felix Yes, we are POWER9. It looks like the ACPI guards are no longer required; as you have surmised, POWER does not use ACPI (the equivalent is OPAL, which is a different interface entirely). What were the APCI calls used for? There may be OPAL equivalents that could be added in to replace them and provide similar functionality. Kernel 5.4 enables a > 32-bit and <=64-bit bypass mode for POWER. This is one reason we came back and revisited the KFD/ROCm functionality on POWER; as it turns out, after fixing up the userspace tools KFD is indeed functional on POWER with 5.4-rc8 and above. My understanding is that the POWER IOMMU is used as a lightweight translation layer between the 64-bit host and the 40/44-bit GPU. I'm working on getting a Debian PPA set up for POWER to make the userspace tools easier to obtain for testing, but progress is slow due to lack of Debian source packages. Probably the easiest way to replicate / test this with HIP is to use the AOMP repository with my modifications; pull requests are already in place on Github for most of the userspace tooling updates. Thank you! _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
