From: Sung Lee <sung.lee@xxxxxxx> [WHY] Currently made a change where disable_output is called using signal_type. Using actual signal_type when calilng disable_output in power_down_encoders would make DP to HDMI dongle not light up on boot. As it would have signal_type SIGNAL_TYPE_DISPLAY_PORT. [HOW] Set signal_type to SIGNAL_TYPE_NONE unless it is eDP. Signed-off-by: Sung Lee <sung.lee@xxxxxxx> Reviewed-by: Yongqiang Sun <yongqiang.sun@xxxxxxx> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@xxxxxxx> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index f0e837d14000..37f5bbcba155 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1438,6 +1438,9 @@ static void power_down_encoders(struct dc *dc) if (!dc->links[i]->wa_flags.dp_keep_receiver_powered) dp_receiver_power_ctrl(dc->links[i], false); + if (signal != SIGNAL_TYPE_EDP) + signal = SIGNAL_TYPE_NONE; + dc->links[i]->link_enc->funcs->disable_output( dc->links[i]->link_enc, signal); } -- 2.17.1 _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
