From: Lewis Huang <Lewis.Huang@xxxxxxx>
[Why]
Signal is update to EDP when driver disable first encoder. The
following encoder using SIGNAL_TYPE_EDP to handle other
device. When encoder signal is HDMI, driver will detect it is dp
and release phy. It cause hw hang.
[How]
Take signal type from link->connector_signal.
Signed-off-by: Lewis Huang <Lewis.Huang@xxxxxxx>
Reviewed-by: Eric Yang <eric.yang2@xxxxxxx>
Acked-by: Leo Li <sunpeng.li@xxxxxxx>
---
.../drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 9150e546dcf2..f0e837d14000 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1421,8 +1421,6 @@ static enum dc_status apply_single_controller_ctx_to_hw(
static void power_down_encoders(struct dc *dc)
{
int i;
- enum connector_id connector_id;
- enum signal_type signal = SIGNAL_TYPE_NONE;
/* do not know BIOS back-front mapping, simply blank all. It will not
* hurt for non-DP
@@ -1433,15 +1431,12 @@ static void power_down_encoders(struct dc *dc)
}
for (i = 0; i < dc->link_count; i++) {
- connector_id = dal_graphics_object_id_get_connector_id(dc->links[i]->link_id);
- if ((connector_id == CONNECTOR_ID_DISPLAY_PORT) ||
- (connector_id == CONNECTOR_ID_EDP)) {
+ enum signal_type signal = dc->links[i]->connector_signal;
+ if ((signal == SIGNAL_TYPE_EDP) ||
+ (signal == SIGNAL_TYPE_DISPLAY_PORT))
if (!dc->links[i]->wa_flags.dp_keep_receiver_powered)
dp_receiver_power_ctrl(dc->links[i], false);
- if (connector_id == CONNECTOR_ID_EDP)
- signal = SIGNAL_TYPE_EDP;
- }
dc->links[i]->link_enc->funcs->disable_output(
dc->links[i]->link_enc, signal);
--
2.23.0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
