[PATCH 11/29] drm/amd/display: fix incorrect page table address for renoir

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Incorrect page table address and programming sys aperture for
stutter gather, so fix it.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@xxxxxxx>
---
 .../drm/amd/display/dc/dcn21/dcn21_hubbub.c   | 23 ++++++++++++++-----
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c
index bd247e5e753e..fdfbdeb32459 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c
@@ -111,19 +111,30 @@ int hubbub21_init_dchub(struct hubbub *hubbub,
 		struct dcn_hubbub_phys_addr_config *pa_config)
 {
 	struct dcn20_hubbub *hubbub1 = TO_DCN20_HUBBUB(hubbub);
+	struct dcn_vmid_page_table_config phys_config;
 
 	REG_SET(DCN_VM_FB_LOCATION_BASE, 0,
-		FB_BASE, pa_config->system_aperture.fb_base);
+			FB_BASE, pa_config->system_aperture.fb_base >> 24);
 	REG_SET(DCN_VM_FB_LOCATION_TOP, 0,
-			FB_TOP, pa_config->system_aperture.fb_top);
+			FB_TOP, pa_config->system_aperture.fb_top >> 24);
 	REG_SET(DCN_VM_FB_OFFSET, 0,
-			FB_OFFSET, pa_config->system_aperture.fb_offset);
+			FB_OFFSET, pa_config->system_aperture.fb_offset >> 24);
 	REG_SET(DCN_VM_AGP_BOT, 0,
-			AGP_BOT, pa_config->system_aperture.agp_bot);
+			AGP_BOT, pa_config->system_aperture.agp_bot >> 24);
 	REG_SET(DCN_VM_AGP_TOP, 0,
-			AGP_TOP, pa_config->system_aperture.agp_top);
+			AGP_TOP, pa_config->system_aperture.agp_top >> 24);
 	REG_SET(DCN_VM_AGP_BASE, 0,
-			AGP_BASE, pa_config->system_aperture.agp_base);
+			AGP_BASE, pa_config->system_aperture.agp_base >> 24);
+
+	if (pa_config->gart_config.page_table_start_addr != pa_config->gart_config.page_table_end_addr) {
+		phys_config.page_table_start_addr = pa_config->gart_config.page_table_start_addr >> 12;
+		phys_config.page_table_end_addr = pa_config->gart_config.page_table_end_addr >> 12;
+		phys_config.page_table_base_addr = pa_config->gart_config.page_table_base_addr | 1; //Note: hack
+		phys_config.depth = 0;
+		phys_config.block_size = 0;
+		// Init VMID 0 based on PA config
+		dcn20_vmid_setup(&hubbub1->vmid[0], &phys_config);
+	}
 
 	dcn21_dchvm_init(hubbub);
 
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux