[PATCH 13/26] drm/amd/display: use dcn10 version of program tiling on Renoir

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eric Yang <Eric.Yang2@xxxxxxx>

[Why]
Renoir is gfx9, same as dcn10, not dcn20.

Signed-off-by: Eric Yang <Eric.Yang2@xxxxxxx>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@xxxxxxx>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c
index a00af513aa2b..2f5a5867e674 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c
@@ -22,6 +22,8 @@
  * Authors: AMD
  *
  */
+
+#include "dcn10/dcn10_hubp.h"
 #include "dcn21_hubp.h"
 
 #include "dm_services.h"
@@ -202,7 +204,7 @@ static struct hubp_funcs dcn21_hubp_funcs = {
 	.hubp_enable_tripleBuffer = hubp2_enable_triplebuffer,
 	.hubp_is_triplebuffer_enabled = hubp2_is_triplebuffer_enabled,
 	.hubp_program_surface_flip_and_addr = hubp2_program_surface_flip_and_addr,
-	.hubp_program_surface_config = hubp2_program_surface_config,
+	.hubp_program_surface_config = hubp1_program_surface_config,
 	.hubp_is_flip_pending = hubp1_is_flip_pending,
 	.hubp_setup = hubp21_setup,
 	.hubp_setup_interdependent = hubp2_setup_interdependent,
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux