|
Reviewed-by: Kevin Wang <kevin1.wang@xxxxxxx>
Best Regards,
Kevin
From: Quan, Evan <Evan.Quan@xxxxxxx>
Sent: Tuesday, August 20, 2019 10:09 AM
To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>
Cc: Wang, Kevin(Yang) <Kevin1.Wang@xxxxxxx>
Subject: RE: [PATCH 3/4] drm/amd/powerplay: get bootup fclk value
Ping..
From: Quan, Evan
Sent: Friday, August 16, 2019 4:00 PM
To: Wang, Kevin(Yang) <Kevin1.Wang@xxxxxxx>; amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Subject: RE: [PATCH 3/4] drm/amd/powerplay: get bootup fclk value
Since smu_get_atom_data_table() was already used in smu_v11_0_get_vbios_bootup_values(). We should get all our needed information at once.
Also, what smu_get_atom_data_table() does is to get the data table from vbios. It’s a time and resource cost job.
I do not think it’s a good idea to call it again just to get some information we should already know.
Regards,
Evan
i think we can use a function to retrieve this information without storing it separately.
likes: ret = smu_get_atom_data_table(smu, index, &size, &frev, &crev,
(uint8_t **)&header);
because these information is a generic information from atom_common_table_header.
and other function don't care it except in smu_v11_0_get_clk_info_from_vbios.
This is available with firmwareinfo table v3.2 or later.
Change-Id: I223edf3c616b9e3e2527c752214fef5ab53d1cea
Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
---
.../gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 3 +++
drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 21 +++++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
index ca9b9ec39de8..2c16eb412954 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
@@ -222,6 +222,9 @@ struct smu_bios_boot_up_values
uint16_t vdd_gfx;
uint8_t cooling_id;
uint32_t pp_table_id;
+ uint32_t format_revision;
+ uint32_t content_revision;
+ uint32_t fclk;
};
enum smu_table_id
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index 4a51de4ff162..df7b65360ac7 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -568,6 +568,9 @@ int smu_v11_0_get_vbios_bootup_values(struct smu_context *smu)
smu->smu_table.boot_values.pp_table_id = v_3_3->pplib_pptable_id;
}
+ smu->smu_table.boot_values.format_revision = header->format_revision;
+ smu->smu_table.boot_values.content_revision = header->content_revision;
+
return 0;
}
@@ -647,6 +650,24 @@ static int smu_v11_0_get_clk_info_from_vbios(struct smu_context *smu)
output = (struct atom_get_smu_clock_info_output_parameters_v3_1 *)&input;
smu->smu_table.boot_values.dclk = le32_to_cpu(output->atom_smu_outputclkfreq.smu_clock_freq_hz) / 10000;
+ if ((smu->smu_table.boot_values.format_revision == 3) &&
+ (smu->smu_table.boot_values.content_revision >= 2)) {
+ memset(&input, 0, sizeof(input));
+ input.clk_id = SMU11_SYSPLL1_0_FCLK_ID;
+ input.syspll_id = SMU11_SYSPLL1_2_ID;
+ input.command = GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ;
+ index = get_index_into_master_table(atom_master_list_of_command_functions_v2_1,
+ getsmuclockinfo);
+
+ ret = amdgpu_atom_execute_table(adev->mode_info.atom_context, index,
+ (uint32_t *)&input);
+ if (ret)
+ return -EINVAL;
+
+ output = (struct atom_get_smu_clock_info_output_parameters_v3_1 *)&input;
+ smu->smu_table.boot_values.fclk = le32_to_cpu(output->atom_smu_outputclkfreq.smu_clock_freq_hz) / 10000;
+ }
+
return 0;
}
--
2.22.0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
|
