On 8/19/19 4:48 PM, Neil Armstrong wrote: > Hi Dariusz, Hans, > > I can apply the dw-hdmi patches if necessary. I'd appreciate it if you can do that. Thanks, Hans > > Neil > > On 19/08/2019 11:38, Hans Verkuil wrote: >> Hi all, >> >> The patches in this series can be applied independently from each other. >> >> If you maintain one of these drivers and you want to merge it for v5.4 >> yourself, then please do so and let me know. If you prefer I commit it >> to drm-misc, then please review and (hopefully) Ack the patch. >> >> I would really like to get this in for v5.4 so I can get the userspace >> bits in for v5.4 as well through the media subsystem. >> >> Dariusz, can you post a v7.1 for patch 5/9 fixing the typo? >> >> Thanks! >> >> Hans >> >> On 8/14/19 12:44 PM, Dariusz Marcinkiewicz wrote: >>> This series updates DRM drivers to use new CEC notifier API. >>> >>> Changes since v6: >>> Made CEC notifiers' registration and de-registration symmetric >>> in tda998x and dw-hdmi drivers. Also, accidentally dropped one >>> patch in v6 (change to drm_dp_cec), brought it back now. >>> Changes since v5: >>> Fixed a warning about a missing comment for a new member of >>> drm_dp_aux_cec struct. Sending to a wider audience, >>> including maintainers of respective drivers. >>> Changes since v4: >>> Addressing review comments. >>> Changes since v3: >>> Updated adapter flags in dw-hdmi-cec. >>> Changes since v2: >>> Include all DRM patches from "cec: improve notifier support, >>> add connector info connector info" series. >>> Changes since v1: >>> Those patches delay creation of notifiers until respective >>> connectors are constructed. It seems that those patches, for a >>> couple of drivers, by adding the delay, introduce a race between >>> notifiers' creation and the IRQs handling threads - at least I >>> don't see anything obvious in there that would explicitly forbid >>> such races to occur. v2 adds a write barrier to make sure IRQ >>> threads see the notifier once it is created (replacing the >>> WRITE_ONCE I put in v1). The best thing to do here, I believe, >>> would be not to have any synchronization and make sure that an IRQ >>> only gets enabled after the notifier is created. >>> Dariusz Marcinkiewicz (9): >>> drm_dp_cec: add connector info support. >>> drm/i915/intel_hdmi: use cec_notifier_conn_(un)register >>> dw-hdmi-cec: use cec_notifier_cec_adap_(un)register >>> tda9950: use cec_notifier_cec_adap_(un)register >>> drm: tda998x: use cec_notifier_conn_(un)register >>> drm: sti: use cec_notifier_conn_(un)register >>> drm: tegra: use cec_notifier_conn_(un)register >>> drm: dw-hdmi: use cec_notifier_conn_(un)register >>> drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register >>> >>> .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 2 +- >>> drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c | 13 +++--- >>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 46 +++++++++++++------ >>> drivers/gpu/drm/drm_dp_cec.c | 25 ++++++---- >>> drivers/gpu/drm/exynos/exynos_hdmi.c | 31 +++++++------ >>> drivers/gpu/drm/i2c/tda9950.c | 12 ++--- >>> drivers/gpu/drm/i2c/tda998x_drv.c | 36 ++++++++++----- >>> drivers/gpu/drm/i915/display/intel_dp.c | 4 +- >>> drivers/gpu/drm/i915/display/intel_hdmi.c | 13 ++++-- >>> drivers/gpu/drm/nouveau/nouveau_connector.c | 3 +- >>> drivers/gpu/drm/sti/sti_hdmi.c | 19 +++++--- >>> drivers/gpu/drm/tegra/output.c | 28 ++++++++--- >>> include/drm/drm_dp_helper.h | 17 ++++--- >>> 13 files changed, 155 insertions(+), 94 deletions(-) >>> >> > _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
