RE: [PATCH] drm/amd/powerplay: correct SW smu11 thermal range settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Yes, the lowest settings for thermal controller is 0.

 

Regards

Evan

From: Feng, Kenneth <Kenneth.Feng@xxxxxxx>
Sent: Monday, August 19, 2019 1:12 PM
To: Quan, Evan <Evan.Quan@xxxxxxx>; Wang, Kevin(Yang) <Kevin1.Wang@xxxxxxx>; amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Subject: RE: [PATCH] drm/amd/powerplay: correct SW smu11 thermal range settings

 

Hi Evan,

So due to the below code, we don’t get a chance to set -273.15, right?

+       low = max(SMU_THERMAL_MINIMUM_ALERT_TEMP,
+                       range.min / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES);
+       high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP,
+                       range.max / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES);

 

From: amd-gfx [mailto:amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Quan, Evan
Sent: Monday, August 19, 2019 10:16 AM
To: Wang, Kevin(Yang) <Kevin1.Wang@xxxxxxx>; amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Subject: RE: [PATCH] drm/amd/powerplay: correct SW smu11 thermal range settings

 

[CAUTION: External Email]

Comment inline

 

From: Wang, Kevin(Yang) <Kevin1.Wang@xxxxxxx>
Sent: Friday, August 16, 2019 7:04 PM
To: Quan, Evan <Evan.Quan@xxxxxxx>; amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Subject: Re: [PATCH] drm/amd/powerplay: correct SW smu11 thermal range settings

 

Hi Evan,

 

the temperature min value should be 0, not -273 on smu11.

you can refrence window driver code or register spec.

        output_ptr->operating_temperature_min_Limit = 0;                                                                                                                                      
        output_ptr->operating_temperature_max_Limit = ppt_info->software_shutdown_temp;

[Quan, Evan] There was a discussion over the min value(0 or -273.15) and we decided to use the later considering the OD case.

All the existing and coming ASICs should  follow this design.

and in smu11, the thermal control has a 8bit register to set min and max value, and the unit is temperature.

[Quan, Evan] That is still honored, no violation here.

so there is something wrong with this patch.

 

Best Regards,
Kevin


From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> on behalf of Evan Quan <evan.quan@xxxxxxx>
Sent: Friday, August 16, 2019 5:31 PM
To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>
Cc: Quan, Evan <Evan.Quan@xxxxxxx>
Subject: [PATCH] drm/amd/powerplay: correct SW smu11 thermal range settings

 

Problems with current settings:
1. The min value was overrided to 0 on Vega20 & Navi10. While
   the expected should be -273.15 C.
2. The thermal min/max threshold was output in wrong unit on
   Navi10 & Arcturus. As TEMP_RANGE_MIN/MAX is already in
   millicelsius. And "*1000" in smu_v11_0_start_thermal_control
   makes the output wrongly.

Change-Id: I2f1866edd1baf264f521310343f492eaede26c33
Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
---
 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c  | 10 ----
 drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h |  6 +++
 drivers/gpu/drm/amd/powerplay/navi10_ppt.c    |  5 +-
 drivers/gpu/drm/amd/powerplay/smu_v11_0.c     | 51 +++++++------------
 drivers/gpu/drm/amd/powerplay/vega20_ppt.c    | 20 +++++---
 5 files changed, 38 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
index 4060607fbb35..1a1f64a9e1e0 100644
--- a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
@@ -880,23 +880,14 @@ static int arcturus_force_clk_levels(struct smu_context *smu,
         return ret;
 }
 
-static const struct smu_temperature_range arcturus_thermal_policy[] =
-{
-       {-273150,  99000, 99000, -273150, 99000, 99000, -273150, 99000, 99000},
-       { 120000, 120000, 120000, 120000, 120000, 120000, 120000, 120000, 120000},
-};
-
 static int arcturus_get_thermal_temperature_range(struct smu_context *smu,
                                                 struct smu_temperature_range *range)
 {
-
         PPTable_t *pptable = smu->smu_table.driver_pptable;
 
         if (!range)
                 return -EINVAL;
 
-       memcpy(range, &arcturus_thermal_policy[0], sizeof(struct smu_temperature_range));
-
         range->max = pptable->TedgeLimit *
                 SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
         range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE) *
@@ -910,7 +901,6 @@ static int arcturus_get_thermal_temperature_range(struct smu_context *smu,
         range->mem_emergency_max = (pptable->TmemLimit + CTF_OFFSET_HBM)*
                 SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
 
-
         return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h b/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
index 0a22fa48ff5a..59b2045e37e4 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
@@ -64,6 +64,12 @@
 #define WORKLOAD_MAP(profile, workload) \
         [profile] = {1, (workload)}
 
+static const struct smu_temperature_range smu11_thermal_policy[] =
+{
+       {-273150,  99000, 99000, -273150, 99000, 99000, -273150, 99000, 99000},
+       { 120000, 120000, 120000, 120000, 120000, 120000, 120000, 120000, 120000},
+};
+
 struct smu_11_0_cmn2aisc_mapping {
         int     valid_mapping;
         int     map_to;
diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
index d7d4186b762f..e804d18f61d0 100644
--- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
@@ -1505,9 +1505,8 @@ static int navi10_get_thermal_temperature_range(struct smu_context *smu,
         if (!range || !powerplay_table)
                 return -EINVAL;
 
-       /* The unit is temperature */
-       range->min = 0;
-       range->max = powerplay_table->software_shutdown_temp;
+       range->max = powerplay_table->software_shutdown_temp *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
 
         return 0;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index df7b65360ac7..5f5fd3a88e48 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -1125,23 +1125,17 @@ static int smu_v11_0_get_current_clk_freq(struct smu_context *smu,
 }
 
 static int smu_v11_0_set_thermal_range(struct smu_context *smu,
-                                      struct smu_temperature_range *range)
+                                      struct smu_temperature_range range)
 {
         struct amdgpu_device *adev = smu->adev;
         int low = SMU_THERMAL_MINIMUM_ALERT_TEMP;
         int high = SMU_THERMAL_MAXIMUM_ALERT_TEMP;
         uint32_t val;
 
-       if (!range)
-               return -EINVAL;
-
-       if (low < range->min)
-               low = range->min;
-       if (high > range->max)
-               high = range->max;
-
-       low = max(SMU_THERMAL_MINIMUM_ALERT_TEMP, range->min);
-       high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP, range->max);
+       low = max(SMU_THERMAL_MINIMUM_ALERT_TEMP,
+                       range.min / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES);
+       high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP,
+                       range.max / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES);
 
         if (low > high)
                 return -EINVAL;
@@ -1177,27 +1171,20 @@ static int smu_v11_0_enable_thermal_alert(struct smu_context *smu)
 static int smu_v11_0_start_thermal_control(struct smu_context *smu)
 {
         int ret = 0;
-       struct smu_temperature_range range = {
-               TEMP_RANGE_MIN,
-               TEMP_RANGE_MAX,
-               TEMP_RANGE_MAX,
-               TEMP_RANGE_MIN,
-               TEMP_RANGE_MAX,
-               TEMP_RANGE_MAX,
-               TEMP_RANGE_MIN,
-               TEMP_RANGE_MAX,
-               TEMP_RANGE_MAX};
+       struct smu_temperature_range range;
         struct amdgpu_device *adev = smu->adev;
 
         if (!smu->pm_enabled)
                 return ret;
 
+       memcpy(&range, &smu11_thermal_policy[0], sizeof(struct smu_temperature_range));
+
         ret = smu_get_thermal_temperature_range(smu, &range);
         if (ret)
                 return ret;
 
         if (smu->smu_table.thermal_controller_type) {
-               ret = smu_v11_0_set_thermal_range(smu, &range);
+               ret = smu_v11_0_set_thermal_range(smu, range);
                 if (ret)
                         return ret;
 
@@ -1210,17 +1197,15 @@ static int smu_v11_0_start_thermal_control(struct smu_context *smu)
                         return ret;
         }
 
-       adev->pm.dpm.thermal.min_temp = range.min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_temp = range.max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_edge_emergency_temp = range.edge_emergency_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.min_hotspot_temp = range.hotspot_min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_hotspot_crit_temp = range.hotspot_crit_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_hotspot_emergency_temp = range.hotspot_emergency_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.min_mem_temp = range.mem_min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_mem_crit_temp = range.mem_crit_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_mem_emergency_temp = range.mem_emergency_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.min_temp = range.min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
-       adev->pm.dpm.thermal.max_temp = range.max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
+       adev->pm.dpm.thermal.min_temp = range.min;
+       adev->pm.dpm.thermal.max_temp = range.max;
+       adev->pm.dpm.thermal.max_edge_emergency_temp = range.edge_emergency_max;
+       adev->pm.dpm.thermal.min_hotspot_temp = range.hotspot_min;
+       adev->pm.dpm.thermal.max_hotspot_crit_temp = range.hotspot_crit_max;
+       adev->pm.dpm.thermal.max_hotspot_emergency_temp = range.hotspot_emergency_max;
+       adev->pm.dpm.thermal.min_mem_temp = range.mem_min;
+       adev->pm.dpm.thermal.max_mem_crit_temp = range.mem_crit_max;
+       adev->pm.dpm.thermal.max_mem_emergency_temp = range.mem_emergency_max;
 
         return ret;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
index acf075393c13..e14363182691 100644
--- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
@@ -3113,14 +3113,18 @@ static int vega20_get_thermal_temperature_range(struct smu_context *smu,
         if (!range || !powerplay_table)
                 return -EINVAL;
 
-       /* The unit is temperature */
-       range->min = 0;
-       range->max = powerplay_table->usSoftwareShutdownTemp;
-       range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE);
-       range->hotspot_crit_max = pptable->ThotspotLimit;
-       range->hotspot_emergency_max = (pptable->ThotspotLimit + CTF_OFFSET_HOTSPOT);
-       range->mem_crit_max = pptable->ThbmLimit;
-       range->mem_emergency_max = (pptable->ThbmLimit + CTF_OFFSET_HBM);
+       range->max = powerplay_table->usSoftwareShutdownTemp *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
+       range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE) *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
+       range->hotspot_crit_max = pptable->ThotspotLimit *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
+       range->hotspot_emergency_max = (pptable->ThotspotLimit + CTF_OFFSET_HOTSPOT) *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
+       range->mem_crit_max = pptable->ThbmLimit *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
+       range->mem_emergency_max = (pptable->ThbmLimit + CTF_OFFSET_HBM) *
+               SMU_TEMPERATURE_UNITS_PER_CENTIGRADES;
 
 
         return 0;
--
2.22.0

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux