From: Zi Yu Liao <ziyu.liao@xxxxxxx>
[why]
When the system is going into suspend, set_backlight gets called
after the eDP got blanked. Since smooth brightness is enabled,
the driver will make a call into the DMCU to ramp the brightness.
The DMCU would try to enable ABM to do so. But since the display is
blanked, this ends up causing ABM1_ACE_DBUF_REG_UPDATE_PENDING to
get stuck at 1, which results in a dead lock in the DMCU firmware.
[how]
Disable brightness ramping when the eDP display is blanked.
Signed-off-by: Zi Yu Liao <ziyu.liao@xxxxxxx>
Reviewed-by: Eric Yang <eric.yang2@xxxxxxx>
Acked-by: Anthony Koo <Anthony.Koo@xxxxxxx>
Acked-by: Leo Li <sunpeng.li@xxxxxxx>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 4b82b86f1e6a..5d6cf6bdccf7 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2350,7 +2350,7 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
if (core_dc->current_state->res_ctx.pipe_ctx[i].stream) {
if (core_dc->current_state->res_ctx.
pipe_ctx[i].stream->link
- == link)
+ == link) {
/* DMCU -1 for all controller id values,
* therefore +1 here
*/
@@ -2358,6 +2358,13 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
core_dc->current_state->
res_ctx.pipe_ctx[i].stream_res.tg->inst +
1;
+
+ /* Disable brightness ramping when the display is blanked
+ * as it can hang the DMCU
+ */
+ if (core_dc->current_state->res_ctx.pipe_ctx[i].plane_state == NULL)
+ frame_ramp = 0;
+ }
}
}
abm->funcs->set_backlight_level_pwm(
--
2.22.0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
