On Sat, Mar 9, 2019 at 1:54 AM Lauri Ehrenpreis <laurioma@xxxxxxxxx> wrote: > > Even if it's using CPU for OCL (I know it's not doing this), why does memcpy on CPU slow down permanently, if I'm not doing anything with OpenCL after clCreateContext? > > As you see from test program it just does clCreateContext and then a loop of memcpy-s on CPU. > > Also I found out that writing different values to /sys/class/drm/card0/device/power_dpm_force_performance_level changes my max memcpy speed on CPU: > > echo "low" > /sys/class/drm/card0/device/power_dpm_force_performance_level > ./cl_slow_test 1 5 > got 1 platforms 1 devices > speed 731.810425 avg 731.810425 mbytes/s > speed 163.425583 avg 447.618011 mbytes/s > speed 123.441612 avg 339.559235 mbytes/s > speed 121.655266 avg 285.083252 mbytes/s > speed 123.806801 avg 252.827972 mbytes/s > > echo "high" > /sys/class/drm/card0/device/power_dpm_force_performance_level > ./cl_slow_test 1 5 > got 1 platforms 1 devices > speed 3742.063721 avg 3742.063721 mbytes/s > speed 836.148987 avg 2289.106445 mbytes/s > speed 189.379166 avg 1589.197266 mbytes/s > speed 189.271393 avg 1239.215820 mbytes/s > speed 188.290451 avg 1029.030762 mbytes/s > > echo "profile_standard" > /sys/class/drm/card0/device/power_dpm_force_performance_level > ./cl_slow_test 1 5 > got 1 platforms 1 devices > speed 2303.955566 avg 2303.955566 mbytes/s > speed 2298.224121 avg 2301.089844 mbytes/s > speed 2295.585205 avg 2299.254883 mbytes/s > speed 2295.762939 avg 2298.381836 mbytes/s > speed 2288.766602 avg 2296.458740 mbytes/s > > echo "profile_peak" > /sys/class/drm/card0/device/power_dpm_force_performance_level > ./cl_slow_test 1 5 > got 1 platforms 1 devices > speed 3710.360352 avg 3710.360352 mbytes/s > speed 3713.660400 avg 3712.010254 mbytes/s > speed 3797.630859 avg 3740.550537 mbytes/s > speed 3708.004883 avg 3732.414062 mbytes/s > speed 3796.403076 avg 3745.211914 mbytes/s > > However none of those is close to the memcpy speed I get when I don't do clCreateContext (my test prog has first arg 0): > ./cl_slow_test 0 5 > speed 7299.201660 avg 7299.201660 mbytes/s > speed 9298.841797 avg 8299.021484 mbytes/s > speed 9360.181641 avg 8652.742188 mbytes/s > speed 9004.759766 avg 8740.746094 mbytes/s > speed 9414.607422 avg 8875.518555 mbytes/s > > Also attached clinfo.txt. It shows that opencl is using GPU so device node permissions are probably not the issue. Is it only memory accesses or does overall CPU performance degrade (including compute - say sysbench) as well? Jan > -- > Lauri > > On Fri, Mar 8, 2019 at 10:35 PM Alex Deucher <alexdeucher@xxxxxxxxx> wrote: >> >> I think you are probably using the CPU for OCL in the remote login >> case. When you log into the desktop, the permissions on the device >> nodes get changed dynamically to support accelerated rendering. You >> probably need to change the permissions on the device nodes manually >> if you are not logging into the desktop. >> >> Alex >> >> On Fri, Mar 8, 2019 at 2:43 PM Lauri Ehrenpreis <laurioma@xxxxxxxxx> wrote: >> > >> > Hi! >> > >> > I am using Ryzen 2400G with Gigabyte AMD B450 AORUS board. I have latest bios, ubuntu 18.04 and latest mainline kernel (5.0.0-050000-generic) installed. Also I have rocm-dev 2.1.96 but no rock-dkms installed. >> > >> > I found that when I log in over ssh and try to use OpenCL (doing clCreateContext is enough) then cpu memory accesses after that will slow down by 100x. >> > If I connect HDMI cable and log in to desktop mode then this does not happen. Also if I don't call clCreateContext then everything works properly. >> > >> > Attached the test program and kernel log also. Test works like that : >> > g++ cl_slow_test.cpp -o cl_slow_test -I /opt/rocm/opencl/include/ -L /opt/rocm/opencl/lib/x86_64/ -lOpenCL >> > lauri@rv:~$ ./cl_slow_test 0 5 >> > speed 7003.145508 avg 7003.145508 mbytes/s >> > speed 8427.357422 avg 7715.251465 mbytes/s >> > speed 9203.049805 avg 8211.184570 mbytes/s >> > speed 9845.956055 avg 8619.877930 mbytes/s >> > speed 9882.748047 avg 8872.452148 mbytes/s >> > lauri@rv:~$ ./cl_slow_test 1 5 >> > got 1 platforms 1 devices >> > speed 1599.803589 avg 1599.803589 mbytes/s >> > speed 1665.426392 avg 1632.614990 mbytes/s >> > speed 146.137253 avg 1137.122437 mbytes/s >> > speed 121.056877 avg 883.106018 mbytes/s >> > speed 122.428970 avg 730.970581 mbytes/s >> > >> > I also tried latest amd-staging kernel https://github.com/M-Bab/linux-kernel-amdgpu-binaries and it had the same issue. >> > >> > Can anyone point me into right direction? >> > >> > Br, >> > Lauri >> > _______________________________________________ >> > amd-gfx mailing list >> > amd-gfx@xxxxxxxxxxxxxxxxxxxxx >> > https://lists.freedesktop.org/mailman/listinfo/amd-gfx > > _______________________________________________ > amd-gfx mailing list > amd-gfx@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/amd-gfx _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
