HI Alex,
I will check with your patch. if it doesn't work i will raise bug .
Regards,
Sk shahul.
On Thu, Feb 21, 2019 at 12:01 PM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
On Wed, Feb 20, 2019 at 11:56 PM shahul hameed
<shahulhameed.481@xxxxxxxxx> wrote:
>
> Hi All,
>
> I did below exoeriments:
>
> -> S2idle is working in software rendering mode(disable AMDGPU driver).
>
> -> For experiment purpose i commented suspend/resume calls of amdgpu driver, in this case S2idle worked.
>
> With above experiments it is clear that my platform supports s2idel.
> Some issue in AMDGPU suspend/resume sequence for s2idle.
> So can you please help me.
I'd suggest filing a bug (https://bugs.freedesktop.org) and attaching
your full dmesg output. I'm not too familiar with s2idle and what
pmops paths it uses. I suspect what is happening is that the power is
not getting fully cut the the device when s2idle is invoked, and it's
left in a bad state on resume. Maybe something like the attached
patch might help. That said, if the platform is not properly cutting
power to the device at s2idle time, you probably aren't saving any
power anyway.
Alex
>
> Thanks & Regards,
> Sk shahul.
>
> On Thu, Feb 21, 2019 at 3:32 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
>>
>> On Wed, Feb 20, 2019 at 4:59 PM shahul hameed
>> <shahulhameed.481@xxxxxxxxx> wrote:
>> >
>> > Hi
>> >
>> > I am facing below issue. Can any one please help me to resolve it.
>>
>> As I mentioned previously, please make sure the platform supports
>> s2idle and that it is enabled in the sbios. Does s2idle work on other
>> devices and the platform itself?
>>
>> Alex
>>
>> >
>> > Regards,
>> > Sk shahul
>> >
>> > ---------- Forwarded message ---------
>> > From: shahul hameed <shahulhameed.481@xxxxxxxxx>
>> > Date: Wed, Feb 20, 2019, 3:13 PM
>> > Subject: s2idle not working
>> > To: <shirish.s@xxxxxxx>
>> >
>> >
>> > Hi Shirish
>> >
>> > I am porting Android_N and keenel 4.19.2 to Ryzen platform. Graphic card is gfx9.
>> > Porting is done successfully. Now i am working on suspend/resume.
>> > Suspend/resume is working fine in deep mode.
>> > But suspend/resume is not working in s2idle (Suspend to idle) mode.
>> >
>> > during resume i found error in gpu driver.
>> >
>> > [ 105.862161] [drm:gfx_v9_0_hw_init [amdgpu]] *ERROR* KCQ enable failed (scratch(0xC040)=0xCAFEDEAD)
>> > [ 105.862187] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <gfx_v9_0> failed -22
>> > [ 105.862210] [drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-22).
>> > [ 105.862215] dpm_run_callback(): pci_pm_resume+0x0/0xd6 returns -22
>> > [ 105.862345] PM: Device 0000:03:00.0 failed to resume async: error -22
>> >
>> > same issue is reproduced with ubuntu16.04.
>> >
>> > Can you please help me to resolve this issue.
>> > Thanks in Advance,
>> > Regards,
>> > Sk shahul.
>> > _______________________________________________
>> > amd-gfx mailing list
>> > amd-gfx@xxxxxxxxxxxxxxxxxxxxx
>> > https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
