On Sun, Feb 17, 2019 at 4:26 PM Rafael J. Wysocki <rafael@xxxxxxxxxx> wrote:
>
> On Sun, Feb 17, 2019 at 12:37 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> >
> > On Sat, Feb 16, 2019 at 1:01 AM Lukas Wunner <lukas@xxxxxxxxx> wrote:
> > >
> > > On Fri, Feb 15, 2019 at 11:01:04AM -0500, Alex Deucher wrote:
> > > > On Fri, Feb 15, 2019 at 10:39 AM Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
> > > > > On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver
> > > > > and the direct-complete optimization is used for the radeon device
> > > > > during system-wide suspend, the system doesn't resume.
> > > > >
> > > > > Preventing direct-complete from being used with the radeon device by
> > > > > setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem
> > > > > go away, which indicates that direct-complete is not safe for the
> > > > > radeon driver in general and should not be used with it (at least
> > > > > for now).
> > > > >
> > > > > This fixes a regression introduced by commit c62ec4610c40
> > > > > ("PM / core: Fix direct_complete handling for devices with no
> > > > > callbacks") which allowed direct-complete to be applied to
> > > > > devices without PM callbacks (again) which in turn unlocked
> > > > > direct-complete for radeon on HP ProBook 4540s.
> > > >
> > > > Do other similar drivers like amdgpu and nouveau need the same fix?
> > > > I'm not too familiar with the direct_complete feature in general.
> > >
> > > direct_complete means that a discrete GPU which is in D3cold upon
> > > entering system sleep is left as is, i.e. it is not woken. It is
> > > also expected to still be in D3cold when resuming from system sleep
> > > from the PM core's point of view. (If it is in D0uninitialized, the
> > > GPU's driver needs to ensure it is transitioned to D3cold again.)
> > >
> > > I know for a fact that resuming the discrete GPU is not necessary
> > > on my MacBook Pro with Nvidia GPU. I'd expect those with AMD GPUs
> > > to behave the same. The apple-gmux driver takes care of putting
> > > the GPU into D3cold on resume from system sleep if it was in D3cold
> > > when entering system sleep (see drivers/platform/x86/apple-gmux.c,
> > > gmux_resume()).
> > >
> > > I think it is desirable to use direct_complete because it saves power
> > > (no need to gratuitously wake the GPU upon entering system sleep,
> > > only to immediately cut its power) and it also speeds up the suspend
> > > process by about half a second.
> >
> > Thanks for the info. It sounds like we need a similar patch for
> > amdgpu. With dGPUs controlled by the ACPI ATPX method, I believe the
> > dGPU is powered by automatically on resume from S3/S4. I think there
> > may be a way to change that behavior in some revisions of ATPX (i.e.,
> > to keep the state across suspend cycles), but it's not the default.
> > I'm not sure about the newer _PR3 stuff in Hybrid Graphics laptops. I
> > think it retains state. In both radeon and amdgpu we probably need to
> > check if the system is using ATPX or _PR3 and disable direct complete
> > for ATPX at least.
>
> I would disable direct-complete entirely for them then and possibly
> consider using DPM_FLAG_SMART_SUSPEND in the cases when that would be
> safe.
>
> Anyway, I posted this patch for radeon, because it addresses a
> specific regression and I'm not super-familiar with GPU drivers in
> general.
Thanks. I've applied this patch and sent out a patch for amdgpu.
Alex
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
