v2: Fix SMU message format
Send override message after SMU enable features
Change-Id: Ib880c83bc7aa12be370cf6619acfe66e12664c9c
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@xxxxxxx>
---
drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 45 +++++++++++++---------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index da022ca..e1b1656 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -771,40 +771,49 @@ static int vega20_init_smc_table(struct pp_hwmgr *hwmgr)
return 0;
}
+/*
+ * Override PCIe link speed and link width for DPM Level 1. PPTable entries
+ * reflect the ASIC capabilities and not the system capabilities. For e.g.
+ * Vega20 board in a PCI Gen3 system. In this case, when SMU's tries to switch
+ * to DPM1, it fails as system doesn't support Gen4.
+ */
static int vega20_override_pcie_parameters(struct pp_hwmgr *hwmgr)
{
struct amdgpu_device *adev = (struct amdgpu_device *)(hwmgr->adev);
- uint32_t pcie_speed = 0, pcie_width = 0, pcie_arg;
+ uint32_t pcie_gen = 0, pcie_width = 0, smu_pcie_arg;
int ret;
if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
- pcie_speed = 16;
+ pcie_gen = 3;
else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
- pcie_speed = 8;
+ pcie_gen = 2;
else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2)
- pcie_speed = 5;
+ pcie_gen = 1;
else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1)
- pcie_speed = 2;
+ pcie_gen = 0;
if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X32)
- pcie_width = 32;
+ pcie_width = 7;
else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16)
- pcie_width = 16;
+ pcie_width = 6;
else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12)
- pcie_width = 12;
+ pcie_width = 5;
else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8)
- pcie_width = 8;
- else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4)
pcie_width = 4;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4)
+ pcie_width = 3;
else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2)
pcie_width = 2;
else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1)
pcie_width = 1;
- pcie_arg = pcie_width | (pcie_speed << 8);
-
+ /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1
+ * Bit 15:8: PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4
+ * Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32
+ */
+ smu_pcie_arg = (1 << 16) | (pcie_gen << 8) | pcie_width;
ret = smum_send_msg_to_smc_with_parameter(hwmgr,
- PPSMC_MSG_OverridePcieParameters, pcie_arg);
+ PPSMC_MSG_OverridePcieParameters, smu_pcie_arg);
PP_ASSERT_WITH_CODE(!ret,
"[OverridePcieParameters] Attempt to override pcie params failed!",
return ret);
@@ -1611,11 +1620,6 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
"[EnableDPMTasks] Failed to initialize SMC table!",
return result);
- result = vega20_override_pcie_parameters(hwmgr);
- PP_ASSERT_WITH_CODE(!result,
- "[EnableDPMTasks] Failed to override pcie parameters!",
- return result);
-
result = vega20_run_btc(hwmgr);
PP_ASSERT_WITH_CODE(!result,
"[EnableDPMTasks] Failed to run btc!",
@@ -1631,6 +1635,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
"[EnableDPMTasks] Failed to enable all smu features!",
return result);
+ result = vega20_override_pcie_parameters(hwmgr);
+ PP_ASSERT_WITH_CODE(!result,
+ "[EnableDPMTasks] Failed to override pcie parameters!",
+ return result);
+
result = vega20_notify_smc_display_change(hwmgr);
PP_ASSERT_WITH_CODE(!result,
"[EnableDPMTasks] Failed to notify smc display change!",
--
2.7.4
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
