Re: [PATCH] drm/amd/powerplay: add override pcie parameters for Vega20 (v2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do we actually need the current status?  We have the caps of the platform and the device.  For the lowest dpm state, we generally want the lowest common gen and then the highest common gen for the highest dpm state.  If we use the current status, we will mostly likely end up with the highest gen in the lowest dpm state because generally the highest gen is negotiated at power up.

Alex

On Fri, Feb 1, 2019 at 5:28 PM Kasiviswanathan, Harish <Harish.Kasiviswanathan@xxxxxxx> wrote:

Thanks Alex. I saw that function. It gets caps. The function requires link status (PCI_EXP_LNKSTA), the value negotiated.


> I'd rather not access pci config space from the powerplay code because it doesn't work under virtualization.

[HK] I will then modify amdgpu_device_get_pcie_info() to read "PCI_EXP_LINKSTA" and store that information for future use.

Best Regards,
Harish



From: Alex Deucher <alexdeucher@xxxxxxxxx>
Sent: Friday, February 1, 2019 5:09 PM
To: Kasiviswanathan, Harish
Cc: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Subject: Re: [PATCH] drm/amd/powerplay: add override pcie parameters for Vega20 (v2)
 
On Fri, Feb 1, 2019 at 4:17 PM Kasiviswanathan, Harish
<Harish.Kasiviswanathan@xxxxxxx> wrote:
>
> v2: Use PCIe link status instead of link capability
>     Send override message after SMU enable features
>
> Change-Id: Iea2a1ac595cf63a9528ff1e9a6955d14d8c3a6d5
> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@xxxxxxx>
> ---
>  drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 93 +++++++++++++++-------
>  1 file changed, 64 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> index da022ca..d166f8c 100644
> --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> @@ -771,40 +771,75 @@ static int vega20_init_smc_table(struct pp_hwmgr *hwmgr)
>         return 0;
>  }
>
> +/*
> + * Override PCIe link speed and link width for DPM Level 1. PPTable entries
> + * reflect the ASIC capabilities and not the system capabilities. For e.g.
> + * Vega20 board in a PCI Gen3 system. In this case, when SMU's tries to switch
> + * to DPM1, it fails as system doesn't support Gen4.
> + */
>  static int vega20_override_pcie_parameters(struct pp_hwmgr *hwmgr)
>  {
>         struct amdgpu_device *adev = (struct amdgpu_device *)(hwmgr->adev);
> -       uint32_t pcie_speed = 0, pcie_width = 0, pcie_arg;
> +       uint32_t pcie_gen = 0, pcie_width = 0, smu_pcie_arg;
>         int ret;
> +       uint16_t lnkstat;
> +
> +       pcie_capability_read_word(adev->pdev, PCI_EXP_LNKSTA, &lnkstat);
>
> -       if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
> -               pcie_speed = 16;
> -       else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
> -               pcie_speed = 8;
> -       else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2)
> -               pcie_speed = 5;
> -       else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1)
> -               pcie_speed = 2;
> -
> -       if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X32)
> -               pcie_width = 32;
> -       else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16)
> -               pcie_width = 16;
> -       else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12)
> -               pcie_width = 12;
> -       else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8)
> -               pcie_width = 8;
> -       else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4)
> +       switch (lnkstat & PCI_EXP_LNKSTA_CLS) {
> +       case PCI_EXP_LNKSTA_CLS_2_5GB:
> +               pcie_gen = 0;
> +               break;
> +       case PCI_EXP_LNKSTA_CLS_5_0GB:
> +               pcie_gen = 1;
> +               break;
> +       case PCI_EXP_LNKSTA_CLS_8_0GB:
> +               pcie_gen = 2;
> +               break;
> +       case PCI_EXP_LNKSTA_CLS_16_0GB:
> +               pcie_gen = 3;
> +               break;
> +       default:
> +               pr_warn("Unknown PCI link speed %x\n",
> +                       lnkstat & PCI_EXP_LNKSTA_CLS);
> +       }
> +
> +
> +       switch ((lnkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT) {
> +       case 32:
> +               pcie_width = 7;
> +               break;
> +       case 16:
> +               pcie_width = 6;
> +               break;
> +       case 12:
> +               pcie_width = 5;
> +               break;
> +       case 8:
>                 pcie_width = 4;
> -       else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2)
> +               break;
> +       case 4:
> +               pcie_width = 3;
> +               break;
> +       case 2:
>                 pcie_width = 2;
> -       else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1)
> +               break;
> +       case 1:
>                 pcie_width = 1;
> +               break;
> +       default:
> +               pr_warn("Unknown PCI link width %x\n",
> +                       lnkstat & PCI_EXP_LNKSTA_CLS);
> +       }
>

We already get the link caps for both the device and the platform in
amdgpu_device_get_pcie_info().  Is that info not adequate?  I'd rather
not access pci config space from the powerplay code because it doesn't
work under virtualization.

Alex

> -       pcie_arg = pcie_width | (pcie_speed << 8);
> -
> +       /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1
> +        * Bit 15:8:  PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4
> +        * Bit 7:0:   PCIE lane width, 1 to 7 corresponds is x1 to x32
> +        */
> +       smu_pcie_arg = (1 << 16) | (pcie_gen << 8) | pcie_width;
>         ret = smum_send_msg_to_smc_with_parameter(hwmgr,
> -                       PPSMC_MSG_OverridePcieParameters, pcie_arg);
> +                       PPSMC_MSG_OverridePcieParameters, smu_pcie_arg);
> +
>         PP_ASSERT_WITH_CODE(!ret,
>                 "[OverridePcieParameters] Attempt to override pcie params failed!",
>                 return ret);
> @@ -1611,11 +1646,6 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
>                         "[EnableDPMTasks] Failed to initialize SMC table!",
>                         return result);
>
> -       result = vega20_override_pcie_parameters(hwmgr);
> -       PP_ASSERT_WITH_CODE(!result,
> -                       "[EnableDPMTasks] Failed to override pcie parameters!",
> -                       return result);
> -
>         result = vega20_run_btc(hwmgr);
>         PP_ASSERT_WITH_CODE(!result,
>                         "[EnableDPMTasks] Failed to run btc!",
> @@ -1631,6 +1661,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
>                         "[EnableDPMTasks] Failed to enable all smu features!",
>                         return result);
>
> +       result = vega20_override_pcie_parameters(hwmgr);
> +       PP_ASSERT_WITH_CODE(!result,
> +                       "[EnableDPMTasks] Failed to override pcie parameters!",
> +                       return result);
> +
>         result = vega20_notify_smc_display_change(hwmgr);
>         PP_ASSERT_WITH_CODE(!result,
>                         "[EnableDPMTasks] Failed to notify smc display change!",
> --
> 2.7.4
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
To see the collection of prior postings to the list, visit the amd-gfx Archives.. Using amd-gfx: To post a message to all the list members, send email to amd-gfx@xxxxxxxxxxxxxxxxxxxxx. You can subscribe to the list, or change your existing subscription, in the sections below.

_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux