|
Ping? Useful for rocm-smi? From: Alex Deucher <alexdeucher@xxxxxxxxx>
Sent: Monday, December 10, 2018 4:17:27 PM To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx Cc: Deucher, Alexander Subject: [PATCH] drm/amdgpu: expose sclk and mclk via hwmon Expose sclk (gfx clock) and mclk (memory clock) via
hwmon compatible interface. hwmon does not actually formally specify a frequency type attribute, but these are compatible with the format of the other attributes exposed via hwmon. Units are hertz. freq1_input - GPU gfx/compute clock in hertz freq2_input - GPU memory clock in hertz (dGPU only) Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx> --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 93 ++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 1f61ed95727c..6d52428fc45b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -1516,6 +1516,75 @@ static ssize_t amdgpu_hwmon_set_power_cap(struct device *dev, return count; } +static ssize_t amdgpu_hwmon_show_sclk(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct amdgpu_device *adev = dev_get_drvdata(dev); + struct drm_device *ddev = adev->ddev; + uint32_t sclk; + int r, size = sizeof(sclk); + + /* Can't get voltage when the card is off */ + if ((adev->flags & AMD_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return -EINVAL; + + /* sanity check PP is enabled */ + if (!(adev->powerplay.pp_funcs && + adev->powerplay.pp_funcs->read_sensor)) + return -EINVAL; + + /* get the sclk */ + r = amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_GFX_SCLK, + (void *)&sclk, &size); + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%d\n", sclk * 10 * 1000); +} + +static ssize_t amdgpu_hwmon_show_sclk_label(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "sclk\n"); +} + +static ssize_t amdgpu_hwmon_show_mclk(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct amdgpu_device *adev = dev_get_drvdata(dev); + struct drm_device *ddev = adev->ddev; + uint32_t mclk; + int r, size = sizeof(mclk); + + /* Can't get voltage when the card is off */ + if ((adev->flags & AMD_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return -EINVAL; + + /* sanity check PP is enabled */ + if (!(adev->powerplay.pp_funcs && + adev->powerplay.pp_funcs->read_sensor)) + return -EINVAL; + + /* get the sclk */ + r = amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_GFX_MCLK, + (void *)&mclk, &size); + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%d\n", mclk * 10 * 1000); +} + +static ssize_t amdgpu_hwmon_show_mclk_label(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "mclk\n"); +} /** * DOC: hwmon @@ -1532,6 +1601,10 @@ static ssize_t amdgpu_hwmon_set_power_cap(struct device *dev, * * - GPU fan * + * - GPU gfx/compute engine clock + * + * - GPU memory clock (dGPU only) + * * hwmon interfaces for GPU temperature: * * - temp1_input: the on die GPU temperature in millidegrees Celsius @@ -1576,6 +1649,12 @@ static ssize_t amdgpu_hwmon_set_power_cap(struct device *dev, * * - fan[1-*]_enable: Enable or disable the sensors.1: Enable 0: Disable * + * hwmon interfaces for GPU clocks: + * + * - freq1_input: the gfx/compute clock in hertz + * + * - freq2_input: the memory clock in hertz + * * You can use hwmon tools like sensors to view this information on your system. * */ @@ -1600,6 +1679,10 @@ static SENSOR_DEVICE_ATTR(power1_average, S_IRUGO, amdgpu_hwmon_show_power_avg, static SENSOR_DEVICE_ATTR(power1_cap_max, S_IRUGO, amdgpu_hwmon_show_power_cap_max, NULL, 0); static SENSOR_DEVICE_ATTR(power1_cap_min, S_IRUGO, amdgpu_hwmon_show_power_cap_min, NULL, 0); static SENSOR_DEVICE_ATTR(power1_cap, S_IRUGO | S_IWUSR, amdgpu_hwmon_show_power_cap, amdgpu_hwmon_set_power_cap, 0); +static SENSOR_DEVICE_ATTR(freq1_input, S_IRUGO, amdgpu_hwmon_show_sclk, NULL, 0); +static SENSOR_DEVICE_ATTR(freq1_label, S_IRUGO, amdgpu_hwmon_show_sclk_label, NULL, 0); +static SENSOR_DEVICE_ATTR(freq2_input, S_IRUGO, amdgpu_hwmon_show_mclk, NULL, 0); +static SENSOR_DEVICE_ATTR(freq2_label, S_IRUGO, amdgpu_hwmon_show_mclk_label, NULL, 0); static struct attribute *hwmon_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, @@ -1622,6 +1705,10 @@ static struct attribute *hwmon_attributes[] = { &sensor_dev_attr_power1_cap_max.dev_attr.attr, &sensor_dev_attr_power1_cap_min.dev_attr.attr, &sensor_dev_attr_power1_cap.dev_attr.attr, + &sensor_dev_attr_freq1_input.dev_attr.attr, + &sensor_dev_attr_freq1_label.dev_attr.attr, + &sensor_dev_attr_freq2_input.dev_attr.attr, + &sensor_dev_attr_freq2_label.dev_attr.attr, NULL }; @@ -1712,6 +1799,12 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj, attr == &sensor_dev_attr_in1_label.dev_attr.attr)) return 0; + /* no mclk on APUs */ + if ((adev->flags & AMD_IS_APU) && + (attr == &sensor_dev_attr_freq2_input.dev_attr.attr || + attr == &sensor_dev_attr_freq2_label.dev_attr.attr)) + return 0; + return effective_mode; } -- 2.13.6 |
_______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
