For pre-gmc9, UMD can only access unmapped PRT tile from CB/TC without
firing VM fault. Kernel would still receive the VM fault interrupt
and output the error message if SDMA is the mc_client.
GMC9 don't need the same since it handle the PRT in different way.
We cannot just skip message for SDMA, as Christian pointed, VM fault
could crash mc block, so we disable vm fault irq during prt range is
accesed.
The nagative is normal vm fault could be ignored during that peroid
without enabling vm_debug kernel parameter.
Change-Id: Ic3c62393768eca90e3e45eaf81e7f26f2e91de84
Signed-off-by: Chunming Zhou <david1.zhou@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 6 ++++++
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c | 6 ++++++
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 6 ++++++
3 files changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
index dae73f6768c2..175c4b319559 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
@@ -486,6 +486,10 @@ static void gmc_v6_0_set_prt(struct amdgpu_device *adev, bool enable)
WREG32(mmVM_PRT_APERTURE1_HIGH_ADDR, high);
WREG32(mmVM_PRT_APERTURE2_HIGH_ADDR, high);
WREG32(mmVM_PRT_APERTURE3_HIGH_ADDR, high);
+ /* Note: when vm_debug enabled, vm fault from SDMAx accessing
+ * PRT range is normal. */
+ if (!amdgpu_vm_debug)
+ amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0);
} else {
WREG32(mmVM_PRT_APERTURE0_LOW_ADDR, 0xfffffff);
WREG32(mmVM_PRT_APERTURE1_LOW_ADDR, 0xfffffff);
@@ -495,6 +499,8 @@ static void gmc_v6_0_set_prt(struct amdgpu_device *adev, bool enable)
WREG32(mmVM_PRT_APERTURE1_HIGH_ADDR, 0x0);
WREG32(mmVM_PRT_APERTURE2_HIGH_ADDR, 0x0);
WREG32(mmVM_PRT_APERTURE3_HIGH_ADDR, 0x0);
+ if (!amdgpu_vm_debug)
+ amdgpu_irq_get(adev, &adev->gmc.vm_fault, 0);
}
}
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
index 5bdeb358bfb5..a4d6d219f4e8 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
@@ -582,6 +582,10 @@ static void gmc_v7_0_set_prt(struct amdgpu_device *adev, bool enable)
WREG32(mmVM_PRT_APERTURE1_HIGH_ADDR, high);
WREG32(mmVM_PRT_APERTURE2_HIGH_ADDR, high);
WREG32(mmVM_PRT_APERTURE3_HIGH_ADDR, high);
+ /* Note: when vm_debug enabled, vm fault from SDMAx accessing
+ * PRT range is normal. */
+ if (!amdgpu_vm_debug)
+ amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0);
} else {
WREG32(mmVM_PRT_APERTURE0_LOW_ADDR, 0xfffffff);
WREG32(mmVM_PRT_APERTURE1_LOW_ADDR, 0xfffffff);
@@ -591,6 +595,8 @@ static void gmc_v7_0_set_prt(struct amdgpu_device *adev, bool enable)
WREG32(mmVM_PRT_APERTURE1_HIGH_ADDR, 0x0);
WREG32(mmVM_PRT_APERTURE2_HIGH_ADDR, 0x0);
WREG32(mmVM_PRT_APERTURE3_HIGH_ADDR, 0x0);
+ if (!amdgpu_vm_debug)
+ amdgpu_irq_get(adev, &adev->gmc.vm_fault, 0);
}
}
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 5150ab614eaa..eea2eb7fc2f5 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -808,6 +808,10 @@ static void gmc_v8_0_set_prt(struct amdgpu_device *adev, bool enable)
WREG32(mmVM_PRT_APERTURE1_HIGH_ADDR, high);
WREG32(mmVM_PRT_APERTURE2_HIGH_ADDR, high);
WREG32(mmVM_PRT_APERTURE3_HIGH_ADDR, high);
+ /* Note: when vm_debug enabled, vm fault from SDMAx accessing
+ * PRT range is normal. */
+ if (!amdgpu_vm_debug)
+ amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0);
} else {
WREG32(mmVM_PRT_APERTURE0_LOW_ADDR, 0xfffffff);
WREG32(mmVM_PRT_APERTURE1_LOW_ADDR, 0xfffffff);
@@ -817,6 +821,8 @@ static void gmc_v8_0_set_prt(struct amdgpu_device *adev, bool enable)
WREG32(mmVM_PRT_APERTURE1_HIGH_ADDR, 0x0);
WREG32(mmVM_PRT_APERTURE2_HIGH_ADDR, 0x0);
WREG32(mmVM_PRT_APERTURE3_HIGH_ADDR, 0x0);
+ if (!amdgpu_vm_debug)
+ amdgpu_irq_get(adev, &adev->gmc.vm_fault, 0);
}
}
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
