From: hersen wu <hersenxs.wu@xxxxxxx>
[WHY] fbc is within the data path from memory to dce. while
re-configure mc dmif, fbc should be enabled. otherwise, fbc
may not be enabled properly.
[HOW] before re-configure mc dmif, disable fbc, only after
dmif re-configuration fully done, enable fbc again.
Signed-off-by: hersen wu <hersenxs.wu@xxxxxxx>
Reviewed-by: Roman Li <Roman.Li@xxxxxxx>
Acked-by: Leo Li <sunpeng.li@xxxxxxx>
---
.../drm/amd/display/dc/dce110/dce110_compressor.c | 91 ++++++++--------------
.../amd/display/dc/dce110/dce110_hw_sequencer.c | 57 ++++++++------
drivers/gpu/drm/amd/display/dc/inc/compressor.h | 1 +
3 files changed, 66 insertions(+), 83 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c
index 1f7f250..52d50e2 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c
@@ -64,65 +64,37 @@ static const struct dce110_compressor_reg_offsets reg_offsets[] = {
static const uint32_t dce11_one_lpt_channel_max_resolution = 2560 * 1600;
-enum fbc_idle_force {
- /* Bit 0 - Display registers updated */
- FBC_IDLE_FORCE_DISPLAY_REGISTER_UPDATE = 0x00000001,
-
- /* Bit 2 - FBC_GRPH_COMP_EN register updated */
- FBC_IDLE_FORCE_GRPH_COMP_EN = 0x00000002,
- /* Bit 3 - FBC_SRC_SEL register updated */
- FBC_IDLE_FORCE_SRC_SEL_CHANGE = 0x00000004,
- /* Bit 4 - FBC_MIN_COMPRESSION register updated */
- FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE = 0x00000008,
- /* Bit 5 - FBC_ALPHA_COMP_EN register updated */
- FBC_IDLE_FORCE_ALPHA_COMP_EN = 0x00000010,
- /* Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated */
- FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN = 0x00000020,
- /* Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated */
- FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF = 0x00000040,
-
- /* Bit 24 - Memory write to region 0 defined by MC registers. */
- FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION0 = 0x01000000,
- /* Bit 25 - Memory write to region 1 defined by MC registers */
- FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION1 = 0x02000000,
- /* Bit 26 - Memory write to region 2 defined by MC registers */
- FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION2 = 0x04000000,
- /* Bit 27 - Memory write to region 3 defined by MC registers. */
- FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION3 = 0x08000000,
-
- /* Bit 28 - Memory write from any client other than MCIF */
- FBC_IDLE_FORCE_MEMORY_WRITE_OTHER_THAN_MCIF = 0x10000000,
- /* Bit 29 - CG statics screen signal is inactive */
- FBC_IDLE_FORCE_CG_STATIC_SCREEN_IS_INACTIVE = 0x20000000,
-};
-
-
static uint32_t align_to_chunks_number_per_line(uint32_t pixels)
{
return 256 * ((pixels + 255) / 256);
}
-static void reset_lb_on_vblank(struct dc_context *ctx)
+static void reset_lb_on_vblank(struct compressor *compressor, uint32_t crtc_inst)
{
- uint32_t value, frame_count;
+ uint32_t value;
+ uint32_t frame_count;
+ uint32_t status_pos;
uint32_t retry = 0;
- uint32_t status_pos =
- dm_read_reg(ctx, mmCRTC_STATUS_POSITION);
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+
+ cp110->offsets = reg_offsets[crtc_inst];
+
+ status_pos = dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_POSITION));
/* Only if CRTC is enabled and counter is moving we wait for one frame. */
- if (status_pos != dm_read_reg(ctx, mmCRTC_STATUS_POSITION)) {
+ if (status_pos != dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_POSITION))) {
/* Resetting LB on VBlank */
- value = dm_read_reg(ctx, mmLB_SYNC_RESET_SEL);
+ value = dm_read_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL));
set_reg_field_value(value, 3, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL);
set_reg_field_value(value, 1, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL2);
- dm_write_reg(ctx, mmLB_SYNC_RESET_SEL, value);
+ dm_write_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL), value);
- frame_count = dm_read_reg(ctx, mmCRTC_STATUS_FRAME_COUNT);
+ frame_count = dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_FRAME_COUNT));
for (retry = 10000; retry > 0; retry--) {
- if (frame_count != dm_read_reg(ctx, mmCRTC_STATUS_FRAME_COUNT))
+ if (frame_count != dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_FRAME_COUNT)))
break;
udelay(10);
}
@@ -130,13 +102,11 @@ static void reset_lb_on_vblank(struct dc_context *ctx)
dm_error("Frame count did not increase for 100ms.\n");
/* Resetting LB on VBlank */
- value = dm_read_reg(ctx, mmLB_SYNC_RESET_SEL);
+ value = dm_read_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL));
set_reg_field_value(value, 2, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL);
set_reg_field_value(value, 0, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL2);
- dm_write_reg(ctx, mmLB_SYNC_RESET_SEL, value);
-
+ dm_write_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL), value);
}
-
}
static void wait_for_fbc_state_changed(
@@ -226,10 +196,10 @@ void dce110_compressor_enable_fbc(
uint32_t addr;
uint32_t value, misc_value;
-
addr = mmFBC_CNTL;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
+ /* params->inst is valid HW CRTC instance start from 0 */
set_reg_field_value(
value,
params->inst,
@@ -238,8 +208,10 @@ void dce110_compressor_enable_fbc(
/* Keep track of enum controller_id FBC is attached to */
compressor->is_enabled = true;
- compressor->attached_inst = params->inst;
- cp110->offsets = reg_offsets[params->inst];
+ /* attached_inst is SW CRTC instance start from 1
+ * 0 = CONTROLLER_ID_UNDEFINED means not attached crtc
+ */
+ compressor->attached_inst = params->inst + CONTROLLER_ID_D0;
/* Toggle it as there is bug in HW */
set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
@@ -268,9 +240,10 @@ void dce110_compressor_enable_fbc(
void dce110_compressor_disable_fbc(struct compressor *compressor)
{
struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+ uint32_t crtc_inst = 0;
if (compressor->options.bits.FBC_SUPPORT) {
- if (dce110_compressor_is_fbc_enabled_in_hw(compressor, NULL)) {
+ if (dce110_compressor_is_fbc_enabled_in_hw(compressor, &crtc_inst)) {
uint32_t reg_data;
/* Turn off compression */
reg_data = dm_read_reg(compressor->ctx, mmFBC_CNTL);
@@ -284,8 +257,10 @@ void dce110_compressor_disable_fbc(struct compressor *compressor)
wait_for_fbc_state_changed(cp110, false);
}
- /* Sync line buffer - dce100/110 only*/
- reset_lb_on_vblank(compressor->ctx);
+ /* Sync line buffer which fbc was attached to dce100/110 only */
+ if (crtc_inst > CONTROLLER_ID_UNDEFINED && crtc_inst < CONTROLLER_ID_D3)
+ reset_lb_on_vblank(compressor,
+ crtc_inst - CONTROLLER_ID_D0);
}
}
@@ -328,6 +303,8 @@ void dce110_compressor_program_compressed_surface_address_and_pitch(
uint32_t compressed_surf_address_low_part =
compressor->compr_surface_address.addr.low_part;
+ cp110->offsets = reg_offsets[params->inst];
+
/* Clear content first. */
dm_write_reg(
compressor->ctx,
@@ -410,13 +387,7 @@ void dce110_compressor_set_fbc_invalidation_triggers(
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
- fbc_trigger |
- FBC_IDLE_FORCE_GRPH_COMP_EN |
- FBC_IDLE_FORCE_SRC_SEL_CHANGE |
- FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE |
- FBC_IDLE_FORCE_ALPHA_COMP_EN |
- FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN |
- FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF,
+ fbc_trigger,
FBC_IDLE_FORCE_CLEAR_MASK,
FBC_IDLE_FORCE_CLEAR_MASK);
dm_write_reg(compressor->ctx, addr, value);
@@ -549,7 +520,7 @@ void dce110_compressor_construct(struct dce110_compressor *compressor,
compressor->base.channel_interleave_size = 0;
compressor->base.dram_channels_num = 0;
compressor->base.lpt_channels_num = 0;
- compressor->base.attached_inst = 0;
+ compressor->base.attached_inst = CONTROLLER_ID_UNDEFINED;
compressor->base.is_enabled = false;
compressor->base.funcs = &dce110_compressor_funcs;
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 2f062ba..6349ba7 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1766,12 +1766,13 @@ static void set_static_screen_control(struct pipe_ctx **pipe_ctx,
* Check if FBC can be enabled
*/
static bool should_enable_fbc(struct dc *dc,
- struct dc_state *context,
- uint32_t *pipe_idx)
+ struct dc_state *context,
+ uint32_t *pipe_idx)
{
uint32_t i;
struct pipe_ctx *pipe_ctx = NULL;
struct resource_context *res_ctx = &context->res_ctx;
+ unsigned int underlay_idx = dc->res_pool->underlay_pipe_index;
ASSERT(dc->fbc_compressor);
@@ -1786,14 +1787,28 @@ static bool should_enable_fbc(struct dc *dc,
for (i = 0; i < dc->res_pool->pipe_count; i++) {
if (res_ctx->pipe_ctx[i].stream) {
+
pipe_ctx = &res_ctx->pipe_ctx[i];
- *pipe_idx = i;
- break;
+
+ if (!pipe_ctx)
+ continue;
+
+ /* fbc not applicable on underlay pipe */
+ if (pipe_ctx->pipe_idx != underlay_idx) {
+ *pipe_idx = i;
+ break;
+ }
}
}
- /* Pipe context should be found */
- ASSERT(pipe_ctx);
+ if (i == dc->res_pool->pipe_count)
+ return false;
+
+ if (!pipe_ctx->stream->sink)
+ return false;
+
+ if (!pipe_ctx->stream->sink->link)
+ return false;
/* Only supports eDP */
if (pipe_ctx->stream->sink->link->connector_signal != SIGNAL_TYPE_EDP)
@@ -1817,8 +1832,9 @@ static bool should_enable_fbc(struct dc *dc,
/*
* Enable FBC
*/
-static void enable_fbc(struct dc *dc,
- struct dc_state *context)
+static void enable_fbc(
+ struct dc *dc,
+ struct dc_state *context)
{
uint32_t pipe_idx = 0;
@@ -1828,10 +1844,9 @@ static void enable_fbc(struct dc *dc,
struct compressor *compr = dc->fbc_compressor;
struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[pipe_idx];
-
params.source_view_width = pipe_ctx->stream->timing.h_addressable;
params.source_view_height = pipe_ctx->stream->timing.v_addressable;
-
+ params.inst = pipe_ctx->stream_res.tg->inst;
compr->compr_surface_address.quad_part = dc->ctx->fbc_gpu_addr;
compr->funcs->surface_address_and_pitch(compr, ¶ms);
@@ -2046,10 +2061,10 @@ enum dc_status dce110_apply_ctx_to_hw(
return status;
}
- dcb->funcs->set_scratch_critical_state(dcb, false);
-
if (dc->fbc_compressor)
- enable_fbc(dc, context);
+ enable_fbc(dc, dc->current_state);
+
+ dcb->funcs->set_scratch_critical_state(dcb, false);
return DC_OK;
}
@@ -2408,7 +2423,6 @@ static void dce110_program_front_end_for_pipe(
struct dc_plane_state *plane_state = pipe_ctx->plane_state;
struct xfm_grph_csc_adjustment adjust;
struct out_csc_color_matrix tbl_entry;
- unsigned int underlay_idx = dc->res_pool->underlay_pipe_index;
unsigned int i;
DC_LOGGER_INIT();
memset(&tbl_entry, 0, sizeof(tbl_entry));
@@ -2449,15 +2463,6 @@ static void dce110_program_front_end_for_pipe(
program_scaler(dc, pipe_ctx);
- /* fbc not applicable on Underlay pipe */
- if (dc->fbc_compressor && old_pipe->stream &&
- pipe_ctx->pipe_idx != underlay_idx) {
- if (plane_state->tiling_info.gfx8.array_mode == DC_ARRAY_LINEAR_GENERAL)
- dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);
- else
- enable_fbc(dc, dc->current_state);
- }
-
mi->funcs->mem_input_program_surface_config(
mi,
plane_state->format,
@@ -2534,6 +2539,9 @@ static void dce110_apply_ctx_for_surface(
if (num_planes == 0)
return;
+ if (dc->fbc_compressor)
+ dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);
+
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
struct pipe_ctx *old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];
@@ -2576,6 +2584,9 @@ static void dce110_apply_ctx_for_surface(
(pipe_ctx->plane_state || old_pipe_ctx->plane_state))
dc->hwss.pipe_control_lock(dc, pipe_ctx, false);
}
+
+ if (dc->fbc_compressor)
+ enable_fbc(dc, dc->current_state);
}
static void dce110_power_down_fe(struct dc *dc, struct pipe_ctx *pipe_ctx)
diff --git a/drivers/gpu/drm/amd/display/dc/inc/compressor.h b/drivers/gpu/drm/amd/display/dc/inc/compressor.h
index bcb18f5..7a147a9 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/compressor.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/compressor.h
@@ -77,6 +77,7 @@ struct compressor_funcs {
};
struct compressor {
struct dc_context *ctx;
+ /* CONTROLLER_ID_D0 + instance, CONTROLLER_ID_UNDEFINED = 0 */
uint32_t attached_inst;
bool is_enabled;
const struct compressor_funcs *funcs;
--
2.7.4
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
