Driver shouldn't try to access any GFX registers until RLC is idle. During the test, it took 12 seconds for RLC to clear the BUSY bit in RLC_GPM_STAT register which is un-acceptable for driver. As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK cycles to finish its critical section. In a lowest 300M enginer clock setting(default from vbios), 50 us delay is enough. Change-Id: If074fbeeecad3f63cf5f5ab232472d0fe46082a6 Signed-off-by: shaoyunl <shaoyun.liu@xxxxxxx> --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index e409fbf..2e3ee42 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -2326,6 +2326,7 @@ static void gfx_v9_0_rlc_start(struct amdgpu_device *adev) #endif WREG32_FIELD15(GC, 0, RLC_CNTL, RLC_ENABLE_F32, 1); + udelay(50); /* carrizo do enable cp interrupt after cp inited */ if (!(adev->flags & AMD_IS_APU)) -- 2.7.4 _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
