Re: [PATCH v7 3/5] drm: Document variable refresh properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-11-08 9:43 a.m., Nicholas Kazlauskas wrote:
> These include the drm_connector 'vrr_capable' and the drm_crtc
> 'vrr_enabled' properties.
> 
> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
> Cc: Harry Wentland <harry.wentland@xxxxxxx>
> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> Cc: Pekka Paalanen <ppaalanen@xxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Michel Dänzer <michel@xxxxxxxxxxx>

Looks good. Whole series is
Reviewed-by: Harry Wentland <harry.wentland@xxxxxxx>

How are we with the userspace patches? We should probably hold off pushing the kernel patches until the userspace work is all reviewed.

Harry

> ---
>  Documentation/gpu/drm-kms.rst   |  7 ++++
>  drivers/gpu/drm/drm_connector.c | 68 +++++++++++++++++++++++++++++++++
>  2 files changed, 75 insertions(+)
> 
> diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
> index 4b1501b4835b..8da2a178cf85 100644
> --- a/Documentation/gpu/drm-kms.rst
> +++ b/Documentation/gpu/drm-kms.rst
> @@ -575,6 +575,13 @@ Explicit Fencing Properties
>  .. kernel-doc:: drivers/gpu/drm/drm_atomic_uapi.c
>     :doc: explicit fencing properties
>  
> +
> +Variable Refresh Properties
> +---------------------------
> +
> +.. kernel-doc:: drivers/gpu/drm/drm_connector.c
> +   :doc: Variable refresh properties
> +
>  Existing KMS Properties
>  -----------------------
>  
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 49290060ab7b..0e4287461997 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1255,6 +1255,74 @@ int drm_mode_create_scaling_mode_property(struct drm_device *dev)
>  }
>  EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
>  
> +/**
> + * DOC: Variable refresh properties
> + *
> + * Variable refresh rate capable displays can dynamically adjust their
> + * refresh rate by extending the duration of their vertical front porch
> + * until page flip or timeout occurs. This can reduce or remove stuttering
> + * and latency in scenarios where the page flip does not align with the
> + * vblank interval.
> + *
> + * An example scenario would be an application flipping at a constant rate
> + * of 48Hz on a 60Hz display. The page flip will frequently miss the vblank
> + * interval and the same contents will be displayed twice. This can be
> + * observed as stuttering for content with motion.
> + *
> + * If variable refresh rate was active on a display that supported a
> + * variable refresh range from 35Hz to 60Hz no stuttering would be observable
> + * for the example scenario. The minimum supported variable refresh rate of
> + * 35Hz is below the page flip frequency and the vertical front porch can
> + * be extended until the page flip occurs. The vblank interval will be
> + * directly aligned to the page flip rate.
> + *
> + * Not all userspace content is suitable for use with variable refresh rate.
> + * Large and frequent changes in vertical front porch duration may worsen
> + * perceived stuttering for input sensitive applications.
> + *
> + * Panel brightness will also vary with vertical front porch duration. Some
> + * panels may have noticeable differences in brightness between the minimum
> + * vertical front porch duration and the maximum vertical front porch duration.
> + * Large and frequent changes in vertical front porch duration may produce
> + * observable flickering for such panels.
> + *
> + * Userspace control for variable refresh rate is supported via properties
> + * on the &drm_connector and &drm_crtc objects.
> + *
> + * "vrr_capable":
> + *	Optional &drm_connector boolean property that drivers should attach
> + *	with drm_connector_attach_vrr_capable_property() on connectors that
> + *	could support variable refresh rates. Drivers should update the
> + *	property value by calling drm_connector_set_vrr_capable_property().
> + *
> + *	Absence of the property should indicate absence of support.
> + *
> + * "vrr_enabled":
> + *	Default &drm_crtc boolean property that notifies the driver that the
> + *	content on the CRTC is suitable for variable refresh rate presentation.
> + *	The driver will take this property as a hint to enable variable
> + *	refresh rate support if the receiver supports it, ie. if the
> + *	"vrr_capable" property is true on the &drm_connector object. The
> + *	vertical front porch duration will be extended until page-flip or
> + *	timeout when enabled.
> + *
> + *	The minimum vertical front porch duration is defined as the vertical
> + *	front porch duration for the current mode.
> + *
> + *	The maximum vertical front porch duration is greater than or equal to
> + *	the minimum vertical front porch duration. The duration is derived
> + *	from the minimum supported variable refresh rate for the connector.
> + *
> + *	The driver may place further restrictions within these minimum
> + *	and maximum bounds.
> + *
> + *	The semantics for the vertical blank timestamp differ when
> + *	variable refresh rate is active. The vertical blank timestamp
> + *	is defined to be an estimate using the current mode's fixed
> + *	refresh rate timings. The semantics for the page-flip event
> + *	timestamp remain the same.
> + */
> +
>  /**
>   * drm_connector_attach_vrr_capable_property - creates the
>   * vrr_capable property
> 
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux