[PATCH v2] drm/amdgpu: Move KFD parameters to amdgpu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-08-24 11:08 AM, Amber Lin wrote:
> After merging KFD into amdgpu, move module parameters defined in KFD to
> amdgpu_drv.c, where other module parameters are declared.
>
> v2: add kernel-doc comments
>
> Change-Id: I2de8d6c96bb49554c028bbc84bdb194f974c9278
> Signed-off-by: Amber Lin <Amber.Lin at amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling at amd.com>

> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 87 +++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/amd/amdkfd/kfd_module.c | 40 ---------------
>  2 files changed, 87 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 2221f6b..dd6d8b1 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -39,6 +39,7 @@
>  #include "amdgpu_gem.h"
>  
>  #include "amdgpu_amdkfd.h"
> +#include "kfd_priv.h"
>  
>  /*
>   * KMS wrapper.
> @@ -127,6 +128,15 @@ int amdgpu_compute_multipipe = -1;
>  int amdgpu_gpu_recovery = -1; /* auto */
>  int amdgpu_emu_mode = 0;
>  uint amdgpu_smu_memory_pool_size = 0;
> +/* KFD parameters */
> +int sched_policy = KFD_SCHED_POLICY_HWS;
> +int hws_max_conc_proc = 8;
> +int cwsr_enable = 1;
> +int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
> +int send_sigterm;
> +int debug_largebar;
> +int ignore_crat;
> +int vega10_noretry;
>  
>  /**
>   * DOC: vramlimit (int)
> @@ -532,6 +542,83 @@ MODULE_PARM_DESC(smu_memory_pool_size,
>  		"0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte");
>  module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444);
>  
> +/**
> + * DOC: sched_policy (int)
> + * Set scheduling policy. Default is HWS(hardware scheduling) with over-subscription.
> + * Setting 1 disables over-subscription. Setting 2 disables HWS and statically
> + * assigns queues to HQDs.
> + */
> +module_param(sched_policy, int, 0444);
> +MODULE_PARM_DESC(sched_policy,
> +	"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
> +
> +/**
> + * DOC: hws_max_conc_proc (int)
> + * Maximum number of processes that HWS can schedule concurrently. The maximum is the
> + * number of VMIDs assigned to the HWS, which is also the default.
> + */
> +module_param(hws_max_conc_proc, int, 0444);
> +MODULE_PARM_DESC(hws_max_conc_proc,
> +	"Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))");
> +
> +/**
> + * DOC: cwsr_enable (int)
> + * CWSR(compute wave store and resume) allows the GPU to preempt shader execution in
> + * the middle of a compute wave. Default is 1 to enable this feature. Setting 0
> + * disables it.
> + */
> +module_param(cwsr_enable, int, 0444);
> +MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
> +
> +/**
> + * DOC: max_num_of_queues_per_device (int)
> + * Maximum number of queues per device. Valid setting is between 1 and 4096. Default
> + * is 4096.
> + */
> +module_param(max_num_of_queues_per_device, int, 0444);
> +MODULE_PARM_DESC(max_num_of_queues_per_device,
> +	"Maximum number of supported queues per device (1 = Minimum, 4096 = default)");
> +
> +/**
> + * DOC: send_sigterm (int)
> + * Send sigterm to HSA process on unhandled exceptions. Default is not to send sigterm
> + * but just print errors on dmesg. Setting 1 enables sending sigterm.
> + */
> +module_param(send_sigterm, int, 0444);
> +MODULE_PARM_DESC(send_sigterm,
> +	"Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)");
> +
> +/**
> + * DOC: debug_largebar (int)
> + * Set debug_largebar as 1 to enable simulating large-bar capability on non-large bar
> + * system. This limits the VRAM size reported to ROCm applications to the visible
> + * size, usually 256MB.
> + * Default value is 0, diabled.
> + */
> +module_param(debug_largebar, int, 0444);
> +MODULE_PARM_DESC(debug_largebar,
> +	"Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)");
> +
> +/**
> + * DOC: ignore_crat (int)
> + * Ignore CRAT table during KFD initialization. By default, KFD uses the ACPI CRAT
> + * table to get information about AMD APUs. This option can serve as a workaround on
> + * systems with a broken CRAT table.
> + */
> +module_param(ignore_crat, int, 0444);
> +MODULE_PARM_DESC(ignore_crat,
> +	"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
> +
> +/**
> + * DOC: noretry (int)
> + * This parameter sets sh_mem_config.retry_disable. Default value, 0, enables retry.
> + * Setting 1 disables retry.
> + * Retry is needed for recoverable page faults.
> + */
> +module_param_named(noretry, vega10_noretry, int, 0644);
> +MODULE_PARM_DESC(noretry,
> +	"Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
> +
>  static const struct pci_device_id pciidlist[] = {
>  #ifdef  CONFIG_DRM_AMDGPU_SI
>  	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_module.c b/drivers/gpu/drm/amd/amdkfd/kfd_module.c
> index 8847514..5f4977b 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_module.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_module.c
> @@ -21,7 +21,6 @@
>   */
>  
>  #include <linux/sched.h>
> -#include <linux/moduleparam.h>
>  #include <linux/device.h>
>  #include "kfd_priv.h"
>  
> @@ -39,45 +38,6 @@ static const struct kgd2kfd_calls kgd2kfd = {
>  			  kgd2kfd_schedule_evict_and_restore_process,
>  };
>  
> -int sched_policy = KFD_SCHED_POLICY_HWS;
> -module_param(sched_policy, int, 0444);
> -MODULE_PARM_DESC(sched_policy,
> -	"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
> -
> -int hws_max_conc_proc = 8;
> -module_param(hws_max_conc_proc, int, 0444);
> -MODULE_PARM_DESC(hws_max_conc_proc,
> -	"Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))");
> -
> -int cwsr_enable = 1;
> -module_param(cwsr_enable, int, 0444);
> -MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
> -
> -int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
> -module_param(max_num_of_queues_per_device, int, 0444);
> -MODULE_PARM_DESC(max_num_of_queues_per_device,
> -	"Maximum number of supported queues per device (1 = Minimum, 4096 = default)");
> -
> -int send_sigterm;
> -module_param(send_sigterm, int, 0444);
> -MODULE_PARM_DESC(send_sigterm,
> -	"Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)");
> -
> -int debug_largebar;
> -module_param(debug_largebar, int, 0444);
> -MODULE_PARM_DESC(debug_largebar,
> -	"Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)");
> -
> -int ignore_crat;
> -module_param(ignore_crat, int, 0444);
> -MODULE_PARM_DESC(ignore_crat,
> -	"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
> -
> -int vega10_noretry;
> -module_param_named(noretry, vega10_noretry, int, 0644);
> -MODULE_PARM_DESC(noretry,
> -	"Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
> -
>  static int kfd_init(void)
>  {
>  	int err;



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux