On Fri, Aug 24, 2018 at 3:45 AM Evan Quan <evan.quan at amd.com> wrote:
>
> Vega20 simplifies the OD logics and it can not fit old
> OD interfaces. Thus we design new OD interfaces for
> vega20.
Please split this into two patches, one to add the internal
od8_settings API, and one to wire it up to sysfs. A few more comments
below.
>
> Change-Id: I888faec46a81287ae24f452ce16b42c1f6d06d7d
> Signed-off-by: Evan Quan <evan.quan at amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.h | 8 +
> drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 125 ++++++++++++
> .../gpu/drm/amd/include/kgd_pp_interface.h | 2 +
> drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 37 ++++
> .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 191 +++++++++++++++++-
> drivers/gpu/drm/amd/powerplay/inc/hwmgr.h | 2 +
> 6 files changed, 362 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.h
> index ff24e1cc5b65..84b3e6f87abf 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.h
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.h
> @@ -357,6 +357,14 @@ enum amdgpu_pcie_gen {
> ((adev)->powerplay.pp_funcs->odn_edit_dpm_table(\
> (adev)->powerplay.pp_handle, type, parameter, size))
>
> +#define amdgpu_dpm_get_od8_settings(adev, buf) \
> + ((adev)->powerplay.pp_funcs->get_od8_settings(\
> + (adev)->powerplay.pp_handle, buf))
> +
> +#define amdgpu_dpm_set_od8_settings(adev, parameter, size) \
> + ((adev)->powerplay.pp_funcs->set_od8_settings(\
> + (adev)->powerplay.pp_handle, parameter, size))
> +
> struct amdgpu_dpm {
> struct amdgpu_ps *ps;
> /* number of valid power states */
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> index daa55fb06171..94cd7c503372 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> @@ -934,6 +934,121 @@ static ssize_t amdgpu_get_busy_percent(struct device *dev,
> return snprintf(buf, PAGE_SIZE, "%d\n", value);
> }
>
> +/**
> + * DOC: pp_od8_settings
> + *
> + * The amdgpu driver provides a sysfs API for adjusting the clocks, voltages,
> + * power limit, fan speed and temperature. The pp_od8_settings is used for
> + * this.
> + *
> + * Reading the file will display:
> + *
> + * - a name list of the features that are able to be adjusted
> + *
> + * - the mininum and maximum allowed value for each supported
> + * feature labeled in format of "[mininum - maximum]"
> + *
> + * - the current value for each supported feature labeled after
> + * ":"
> + *
> + * To manually adjust these settings:
> + *
> + * - write a string that contains the new value for each supported
> + * feature. For those which do not need to be changed, just enter
> + * their old value
> + *
> + * - make sure the new value is within the allowed ranges between
> + * the minimum and maximum
We should probably also make it a set and commit model like we do for
previous asics for consistency. That way you can see the changes, and
then apply them.
> + *
> + * All the possible supported features:
> + *
> + * - Gfx clock
> + * The min and max frequency can be specified by GfxclkFmin
> + * and GfxclkFmax(both in Mhz). Intermediate levels are
> + * stretched/shrunk according to ratio in original table.
> + *
> + * - Gfx voltage
> + * With three pairs of gfx clk(in Mhz) and offset voltage(in mV)
> + * combinations specified, smu fw can calibrate the voltage
> + * curve automatically.
> + * - GfxclkFreq1 <-> GfxclkOffsetVolt1
> + * - GfxclkFreq2 <-> GfxclkOffsetVolt2
> + * - GfxclkFreq3 <-> GfxclkOffsetVolt3
> + *
> + * - Uclk
> + * The max memory clock can be specified by UclkFmax(in Mhz).
> + *
> + * - Power limit
> + * The power limit can be increased or descreased by
> + * OverDrivePct(in percent).
We already expose the power limit via hwmon. Do we still need it here?
> + *
> + * - Fan spped
spped -> speed
> + * The max fan speed can be set by FanMaxinumRpm and the
FanMaxinumRpm -> FanMaximumRpm
> + * min fan speed by FanMinimumPwm. Also zero rpm enablement
> + * is specified by FanZeroRpmEnable.
> + *
> + * - Temperature
> + * The fan target temperature can be set by FanTargetTemperature
> + * and max Tj temperature by MaxOpTemp.
The fan and temp stuff might be a better fit for the hwmon interfaces:
https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
> + *
> + */
> +
> +static ssize_t amdgpu_get_pp_od8_settings(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct drm_device *ddev = dev_get_drvdata(dev);
> + struct amdgpu_device *adev = ddev->dev_private;
> +
> + if (adev->powerplay.pp_funcs->get_od8_settings)
> + return amdgpu_dpm_get_od8_settings(adev, buf);
> +
> + return snprintf(buf, PAGE_SIZE, "\n");
> +}
> +
> +static ssize_t amdgpu_set_pp_od8_settings(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t count)
> +{
> + struct drm_device *ddev = dev_get_drvdata(dev);
> + struct amdgpu_device *adev = ddev->dev_private;
> + char *sub_str, *tmp_str, buf_cpy[128];
> + const char delimiter[3] = {' ', '\n', '\0'};
> + uint32_t parameter_size = 0;
> + long parameter[64];
> + int ret = 0xff;
> +
> + if (count >= sizeof(buf_cpy) / sizeof(buf_cpy[0]))
> + return -EINVAL;
> +
> + memcpy(buf_cpy, buf, count);
> + buf_cpy[count] = '\0';
> +
> + tmp_str = buf_cpy;
> +
> + while (isspace(*tmp_str)) tmp_str++;
> +
> + while (tmp_str[0]) {
> + sub_str = strsep(&tmp_str, delimiter);
> + ret = kstrtol(sub_str, 0, ¶meter[parameter_size]);
> + if (ret)
> + return -EINVAL;
> + parameter_size++;
> +
> + while (isspace(*tmp_str))
> + tmp_str++;
> + }
> +
> + if (adev->powerplay.pp_funcs->set_od8_settings)
> + ret = amdgpu_dpm_set_od8_settings(adev, parameter, parameter_size);
> +
> + if (ret)
> + return -EINVAL;
> +
> + return count;
> +}
> +
> static DEVICE_ATTR(power_dpm_state, S_IRUGO | S_IWUSR, amdgpu_get_dpm_state, amdgpu_set_dpm_state);
> static DEVICE_ATTR(power_dpm_force_performance_level, S_IRUGO | S_IWUSR,
> amdgpu_get_dpm_forced_performance_level,
> @@ -969,6 +1084,9 @@ static DEVICE_ATTR(pp_od_clk_voltage, S_IRUGO | S_IWUSR,
> amdgpu_set_pp_od_clk_voltage);
> static DEVICE_ATTR(gpu_busy_percent, S_IRUGO,
> amdgpu_get_busy_percent, NULL);
> +static DEVICE_ATTR(pp_od8_settings, S_IRUGO | S_IWUSR,
> + amdgpu_get_pp_od8_settings,
> + amdgpu_set_pp_od8_settings);
Rather than adding a new file, would it make more sense to expose this
new API on the same file we use for older asics? Otherwise, every
time the interface changes, we'll need to add a new file. We already
handle asic specific differences in the power profile sysfs files.
>
> static ssize_t amdgpu_hwmon_show_temp(struct device *dev,
> struct device_attribute *attr,
> @@ -1879,6 +1997,13 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev)
> "gpu_busy_level\n");
> return ret;
> }
> + ret = device_create_file(adev->dev,
> + &dev_attr_pp_od8_settings);
> + if (ret) {
> + DRM_ERROR("failed to create device file "
> + "pp_od8_settings\n");
> + return ret;
> + }
> ret = amdgpu_debugfs_pm_init(adev);
> if (ret) {
> DRM_ERROR("Failed to register debugfs file for dpm!\n");
> diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
> index 6a41b81c7325..e23746ba53bf 100644
> --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
> +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
> @@ -269,6 +269,8 @@ struct amd_pm_funcs {
> int (*get_display_mode_validation_clocks)(void *handle,
> struct amd_pp_simple_clock_info *clocks);
> int (*notify_smu_enable_pwe)(void *handle);
> + int (*get_od8_settings)(void *handle, char *buf);
> + int (*set_od8_settings)(void *handle, long *input, uint32_t size);
> };
>
> #endif
> diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
> index da4ebff5b74d..4bcd06306698 100644
> --- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
> +++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
> @@ -883,6 +883,41 @@ static int pp_odn_edit_dpm_table(void *handle, uint32_t type, long *input, uint3
> return hwmgr->hwmgr_func->odn_edit_dpm_table(hwmgr, type, input, size);
> }
>
> +static int pp_get_od8_settings(void *handle, char *buf)
> +{
> + struct pp_hwmgr *hwmgr = handle;
> +
> + if (!hwmgr || !hwmgr->pm_en || !buf)
> + return -EINVAL;
> +
> + if (hwmgr->hwmgr_func->get_od8_settings == NULL) {
> + pr_info("%s was not implemented.\n", __func__);
> + return snprintf(buf, PAGE_SIZE, "\n");
> + }
> +
> + return hwmgr->hwmgr_func->get_od8_settings(hwmgr, buf);
> +}
> +
> +static int pp_set_od8_settings(void *handle, long *input, uint32_t size)
> +{
> + struct pp_hwmgr *hwmgr = handle;
> + int ret = -EINVAL;
> +
> + if (!hwmgr || !hwmgr->pm_en)
> + return ret;
> +
> + if (hwmgr->hwmgr_func->set_od8_settings == NULL) {
> + pr_info("%s was not implemented.\n", __func__);
> + return ret;
> + }
> +
> + mutex_lock(&hwmgr->smu_lock);
> + ret = hwmgr->hwmgr_func->set_od8_settings(hwmgr, input, size);
> + mutex_unlock(&hwmgr->smu_lock);
> +
> + return ret;
> +}
> +
> static int pp_dpm_switch_power_profile(void *handle,
> enum PP_SMC_POWER_PROFILE type, bool en)
> {
> @@ -1272,6 +1307,8 @@ static const struct amd_pm_funcs pp_dpm_funcs = {
> .get_power_profile_mode = pp_get_power_profile_mode,
> .set_power_profile_mode = pp_set_power_profile_mode,
> .odn_edit_dpm_table = pp_odn_edit_dpm_table,
> + .get_od8_settings = pp_get_od8_settings,
> + .set_od8_settings = pp_set_od8_settings,
> .set_power_limit = pp_set_power_limit,
> .get_power_limit = pp_get_power_limit,
> /* export to DC */
> diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> index fb32b28afa66..ececa2f7fe5f 100644
> --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> @@ -1099,7 +1099,188 @@ static int vega20_od8_initialize_default_settings(
> return 0;
> }
>
> -static int vega20_od8_set_settings(
> +static int vega20_get_od8_settings(
> + struct pp_hwmgr *hwmgr,
> + char *buf)
> +{
> + struct vega20_hwmgr *data =
> + (struct vega20_hwmgr *)(hwmgr->backend);
> + struct vega20_od8_single_setting *od8_settings =
> + data->od8_settings.od8_settings_array;
> + OverDriveTable_t od_table;
> + uint32_t size = 0;
> + int ret = 0;
> +
> + if (!buf)
> + return -EINVAL;
> +
> + ret = vega20_copy_table_from_smc(hwmgr,
> + (uint8_t *)(&od_table),
> + TABLE_OVERDRIVE);
> + PP_ASSERT_WITH_CODE(!ret,
> + "Failed to export over drive table!",
> + return ret);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_FMIN].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkFmin",
> + od8_settings[OD8_SETTING_GFXCLK_FMIN].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_FMIN].max_value,
> + od_table.GfxclkFmin);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_FMAX].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkFmax",
> + od8_settings[OD8_SETTING_GFXCLK_FMAX].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_FMAX].max_value,
> + od_table.GfxclkFmax);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkFreq1",
> + od8_settings[OD8_SETTING_GFXCLK_FREQ1].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_FREQ1].max_value,
> + od_table.GfxclkFreq1);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkOffsetVolt1",
> + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].max_value,
> + od_table.GfxclkOffsetVolt1);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkFreq2",
> + od8_settings[OD8_SETTING_GFXCLK_FREQ2].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_FREQ2].max_value,
> + od_table.GfxclkFreq2);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkOffsetVolt2",
> + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].max_value,
> + od_table.GfxclkOffsetVolt2);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkFreq3",
> + od8_settings[OD8_SETTING_GFXCLK_FREQ3].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_FREQ3].max_value,
> + od_table.GfxclkFreq3);
> +
> + if (od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "GfxclkOffsetVolt3",
> + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].min_value,
> + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].max_value,
> + od_table.GfxclkOffsetVolt3);
> +
> + if (od8_settings[OD8_SETTING_UCLK_FMAX].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "UclkFmax",
> + od8_settings[OD8_SETTING_UCLK_FMAX].min_value,
> + od8_settings[OD8_SETTING_UCLK_FMAX].max_value,
> + od_table.UclkFmax);
> +
> + if (od8_settings[OD8_SETTING_POWER_PERCENTAGE].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "OverDrivePct",
> + od8_settings[OD8_SETTING_POWER_PERCENTAGE].min_value,
> + od8_settings[OD8_SETTING_POWER_PERCENTAGE].max_value,
> + od_table.OverDrivePct);
> +
> + if (od8_settings[OD8_SETTING_FAN_ACOUSTIC_LIMIT].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "FanMaximumRpm",
> + od8_settings[OD8_SETTING_FAN_ACOUSTIC_LIMIT].min_value,
> + od8_settings[OD8_SETTING_FAN_ACOUSTIC_LIMIT].max_value,
> + od_table.FanMaximumRpm);
> +
> + if (od8_settings[OD8_SETTING_FAN_MIN_SPEED].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "FanMinimumPwm",
> + od8_settings[OD8_SETTING_FAN_MIN_SPEED].min_value,
> + od8_settings[OD8_SETTING_FAN_MIN_SPEED].max_value,
> + od_table.FanMinimumPwm);
> +
> + if (od8_settings[OD8_SETTING_FAN_TARGET_TEMP].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "FanTargetTemperautre",
> + od8_settings[OD8_SETTING_FAN_TARGET_TEMP].min_value,
> + od8_settings[OD8_SETTING_FAN_TARGET_TEMP].max_value,
> + od_table.FanTargetTemperature);
> +
> + if (od8_settings[OD8_SETTING_OPERATING_TEMP_MAX].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "MaxOpTemp",
> + od8_settings[OD8_SETTING_OPERATING_TEMP_MAX].min_value,
> + od8_settings[OD8_SETTING_OPERATING_TEMP_MAX].max_value,
> + od_table.MaxOpTemp);
> +
> + if (od8_settings[OD8_SETTING_FAN_ZERO_RPM_CONTROL].feature_id)
> + size += sprintf(buf + size, "%22s[%d - %d]: %u\n", "FanZeroRpmEnable",
> + od8_settings[OD8_SETTING_FAN_ZERO_RPM_CONTROL].min_value,
> + od8_settings[OD8_SETTING_FAN_ZERO_RPM_CONTROL].max_value,
> + od_table.FanZeroRpmEnable);
> +
> + return size;
> +}
> +
> +static int vega20_set_od8_settings(
> + struct pp_hwmgr *hwmgr,
> + long *input,
> + uint32_t size)
> +{
> + struct vega20_hwmgr *data =
> + (struct vega20_hwmgr *)(hwmgr->backend);
> + struct vega20_od8_single_setting *od8_settings =
> + data->od8_settings.od8_settings_array;
> + OverDriveTable_t od_table;
> + uint16_t *buf = (uint16_t *)(&od_table);
> + uint32_t i, j = 0, k;
> + int ret = 0;
> +
> + /* retrieve current overdrive settings */
> + ret = vega20_copy_table_from_smc(hwmgr,
> + (uint8_t *)(&od_table),
> + TABLE_OVERDRIVE);
> + PP_ASSERT_WITH_CODE(!ret,
> + "Failed to export over drive table!",
> + return ret);
> +
> + for (i = 0;
> + i < (sizeof(OverDriveTable_t) / sizeof(uint16_t)) - 1;
> + i++) {
> + /* overdrive table supports no dram timing setting */
> + k = (i == OD8_SETTING_AC_TIMING) ?
> + OD8_SETTING_FAN_ZERO_RPM_CONTROL : i;
> + /*
> + * Not all OD settings are supported and exported
> + * to user.
> + * So, updated only those which are supported and
> + * exported to user.
> + */
> + if (od8_settings[k].feature_id) {
> + if (input[j] < od8_settings[k].min_value ||
> + input[j] > od8_settings[k].max_value)
> + return -EINVAL;
> +
> + buf[i] = input[j];
> + if (j++ >= size - 1)
> + break;
> + }
> + }
> +
> + /* enable the new overdrive settings */
> + ret = vega20_copy_table_to_smc(hwmgr,
> + (uint8_t *)(&od_table),
> + TABLE_OVERDRIVE);
> + PP_ASSERT_WITH_CODE(!ret,
> + "Failed to import over drive table!",
> + return ret);
> +
> + /* update the current_value of overdrive settings */
> + for (i = 0;
> + i < (sizeof(OverDriveTable_t) / sizeof(uint16_t)) - 1;
> + i++) {
> + k = (i == OD8_SETTING_AC_TIMING) ?
> + OD8_SETTING_FAN_ZERO_RPM_CONTROL : i;
> + if (od8_settings[k].feature_id)
> + od8_settings[k].current_value = buf[i];
> + }
> +
> + return 0;
> +}
> +
> +static int vega20_od8_set_single_setting(
> struct pp_hwmgr *hwmgr,
> uint32_t index,
> uint32_t value)
> @@ -1198,7 +1379,7 @@ static int vega20_set_sclk_od(
> do_div(od_sclk, 100);
> od_sclk += golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value;
>
> - ret = vega20_od8_set_settings(hwmgr, OD8_SETTING_GFXCLK_FMAX, od_sclk);
> + ret = vega20_od8_set_single_setting(hwmgr, OD8_SETTING_GFXCLK_FMAX, od_sclk);
> PP_ASSERT_WITH_CODE(!ret,
> "[SetSclkOD] failed to set od gfxclk!",
> return ret);
> @@ -1245,7 +1426,7 @@ static int vega20_set_mclk_od(
> do_div(od_mclk, 100);
> od_mclk += golden_mclk_table->dpm_levels[golden_mclk_table->count - 1].value;
>
> - ret = vega20_od8_set_settings(hwmgr, OD8_SETTING_UCLK_FMAX, od_mclk);
> + ret = vega20_od8_set_single_setting(hwmgr, OD8_SETTING_UCLK_FMAX, od_mclk);
> PP_ASSERT_WITH_CODE(!ret,
> "[SetMclkOD] failed to set od memclk!",
> return ret);
> @@ -2966,6 +3147,10 @@ static const struct pp_hwmgr_func vega20_hwmgr_funcs = {
> vega20_get_power_profile_mode,
> .set_power_profile_mode =
> vega20_set_power_profile_mode,
> + .get_od8_settings =
> + vega20_get_od8_settings,
> + .set_od8_settings =
> + vega20_set_od8_settings,
> /* od related */
> .set_power_limit =
> vega20_set_power_limit,
> diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
> index a6d92128b19c..285af1728e2e 100644
> --- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
> +++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
> @@ -328,6 +328,8 @@ struct pp_hwmgr_func {
> int (*set_power_limit)(struct pp_hwmgr *hwmgr, uint32_t n);
> int (*powergate_mmhub)(struct pp_hwmgr *hwmgr);
> int (*smus_notify_pwe)(struct pp_hwmgr *hwmgr);
> + int (*get_od8_settings)(struct pp_hwmgr *hwmgr, char *buf);
> + int (*set_od8_settings)(struct pp_hwmgr *hwmgr, long *input, uint32_t size);
> };
>
> struct pp_table_func {
> --
> 2.18.0
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
