[PATCH 3/3] drm/amdgpu: Move KFD parameters to amdgpu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After merging KFD into amdgpu, move module parameters defined in KFD to
amdgpu_drv.c, where other module parameters are declared.

Change-Id: I2de8d6c96bb49554c028bbc84bdb194f974c9278
Signed-off-by: Amber Lin <Amber.Lin at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 41 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/amd/amdkfd/kfd_module.c | 40 --------------------------------
 2 files changed, 41 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 2221f6b..af9a766 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -39,6 +39,7 @@
 #include "amdgpu_gem.h"
 
 #include "amdgpu_amdkfd.h"
+#include "kfd_priv.h"
 
 /*
  * KMS wrapper.
@@ -127,6 +128,15 @@ int amdgpu_compute_multipipe = -1;
 int amdgpu_gpu_recovery = -1; /* auto */
 int amdgpu_emu_mode = 0;
 uint amdgpu_smu_memory_pool_size = 0;
+/* KFD parameters */
+int sched_policy = KFD_SCHED_POLICY_HWS;
+int hws_max_conc_proc = 8;
+int cwsr_enable = 1;
+int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
+int send_sigterm;
+int debug_largebar;
+int ignore_crat;
+int vega10_noretry;
 
 /**
  * DOC: vramlimit (int)
@@ -532,6 +542,37 @@ MODULE_PARM_DESC(smu_memory_pool_size,
 		"0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte");
 module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444);
 
+module_param(sched_policy, int, 0444);
+MODULE_PARM_DESC(sched_policy,
+	"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
+
+module_param(hws_max_conc_proc, int, 0444);
+MODULE_PARM_DESC(hws_max_conc_proc,
+	"Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))");
+
+module_param(cwsr_enable, int, 0444);
+MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
+
+module_param(max_num_of_queues_per_device, int, 0444);
+MODULE_PARM_DESC(max_num_of_queues_per_device,
+	"Maximum number of supported queues per device (1 = Minimum, 4096 = default)");
+
+module_param(send_sigterm, int, 0444);
+MODULE_PARM_DESC(send_sigterm,
+	"Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)");
+
+module_param(debug_largebar, int, 0444);
+MODULE_PARM_DESC(debug_largebar,
+	"Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)");
+
+module_param(ignore_crat, int, 0444);
+MODULE_PARM_DESC(ignore_crat,
+	"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
+
+module_param_named(noretry, vega10_noretry, int, 0644);
+MODULE_PARM_DESC(noretry,
+	"Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
+
 static const struct pci_device_id pciidlist[] = {
 #ifdef  CONFIG_DRM_AMDGPU_SI
 	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_module.c b/drivers/gpu/drm/amd/amdkfd/kfd_module.c
index 8847514..5f4977b 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_module.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_module.c
@@ -21,7 +21,6 @@
  */
 
 #include <linux/sched.h>
-#include <linux/moduleparam.h>
 #include <linux/device.h>
 #include "kfd_priv.h"
 
@@ -39,45 +38,6 @@ static const struct kgd2kfd_calls kgd2kfd = {
 			  kgd2kfd_schedule_evict_and_restore_process,
 };
 
-int sched_policy = KFD_SCHED_POLICY_HWS;
-module_param(sched_policy, int, 0444);
-MODULE_PARM_DESC(sched_policy,
-	"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
-
-int hws_max_conc_proc = 8;
-module_param(hws_max_conc_proc, int, 0444);
-MODULE_PARM_DESC(hws_max_conc_proc,
-	"Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))");
-
-int cwsr_enable = 1;
-module_param(cwsr_enable, int, 0444);
-MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
-
-int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
-module_param(max_num_of_queues_per_device, int, 0444);
-MODULE_PARM_DESC(max_num_of_queues_per_device,
-	"Maximum number of supported queues per device (1 = Minimum, 4096 = default)");
-
-int send_sigterm;
-module_param(send_sigterm, int, 0444);
-MODULE_PARM_DESC(send_sigterm,
-	"Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)");
-
-int debug_largebar;
-module_param(debug_largebar, int, 0444);
-MODULE_PARM_DESC(debug_largebar,
-	"Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)");
-
-int ignore_crat;
-module_param(ignore_crat, int, 0444);
-MODULE_PARM_DESC(ignore_crat,
-	"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
-
-int vega10_noretry;
-module_param_named(noretry, vega10_noretry, int, 0644);
-MODULE_PARM_DESC(noretry,
-	"Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
-
 static int kfd_init(void)
 {
 	int err;
-- 
2.7.4



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux