Chrome freezed and had to be killed, error on dmesg below.
Using AMD Ryzen 2500u
[ 0.000000] Linux version 4.18.1-arch1-1-ARCH (builduser at heftig-21694)
(gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Wed Aug 15 21:11:55 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux
root=UUID=7bec7995-3557-480d-aee8-d9871405748d rw pci=noaer idle=nomwait
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x000000000400ffff] ACPI
NVS
[ 0.000000] BIOS-e820: [mem 0x0000000004010000-0x0000000009e9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009ea0000-0x0000000009ffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x00000000ccfaafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ccfab000-0x00000000cd096fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd097000-0x00000000cd0c6fff] ACPI
data
[ 0.000000] BIOS-e820: [mem 0x00000000cd0c7000-0x00000000cd59efff] ACPI
NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd59f000-0x00000000cdd4bfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdd4c000-0x00000000ceffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000dfffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fd8fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe800fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000051f33ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: HP HP ENVY x360 Convertible 15m-bq1xx/83C6, BIOS F.17
03/29/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x51f340 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000520000000 aka 20992M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC-
WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x236676000, 0x236676fff] PGTABLE
[ 0.000000] BRK [0x236677000, 0x236677fff] PGTABLE
[ 0.000000] BRK [0x236678000, 0x236678fff] PGTABLE
[ 0.000000] BRK [0x236679000, 0x236679fff] PGTABLE
[ 0.000000] BRK [0x23667a000, 0x23667afff] PGTABLE
[ 0.000000] BRK [0x23667b000, 0x23667bfff] PGTABLE
[ 0.000000] BRK [0x23667c000, 0x23667cfff] PGTABLE
[ 0.000000] BRK [0x23667d000, 0x23667dfff] PGTABLE
[ 0.000000] BRK [0x23667e000, 0x23667efff] PGTABLE
[ 0.000000] BRK [0x23667f000, 0x23667ffff] PGTABLE
[ 0.000000] BRK [0x236680000, 0x236680fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35e07000-0x36efafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000CD0A7090 00009C (v01 HPQOEM SLIC-MPC
01072009 HP 00010013)
[ 0.000000] ACPI: FACP 0x00000000CD0BC1A0 000114 (v06 HPQOEM SLIC-MPC
01072009 HP 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock
has valid Length but zero Address: 0x0000000000000000/0x1
(20180531/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000CD0A71B8 014FE2 (v02 HPQOEM 83C6
01072009 ACPI 20120913)
[ 0.000000] ACPI: FACS 0x00000000CD582F80 000040
[ 0.000000] ACPI: APIC 0x00000000CD0BC2B8 0000DE (v03 HPQOEM 83C6
01072009 HP 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CD0BC398 000044 (v01 HPQOEM 83C6
01072009 HP 00010013)
[ 0.000000] ACPI: FIDT 0x00000000CD0BC3E0 00009C (v01 HPQOEM 83C6
01072009 HP 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CD0BC480 0051C4 (v02 HPQOEM 83C6
00000002 ACPI 04000000)
[ 0.000000] ACPI: MCFG 0x00000000CD0C1648 00003C (v01 HPQOEM 83C6
01072009 HP 00010013)
[ 0.000000] ACPI: MSDM 0x00000000CD0C1688 000055 (v03 HPQOEM SLIC-MPC
00000001 HP 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CD0C16E0 00119C (v01 HPQOEM 83C6
00000001 ACPI 00000001)
[ 0.000000] ACPI: CRAT 0x00000000CD0C2880 000838 (v01 HPQOEM 83C6
00000001 HP 00000001)
[ 0.000000] ACPI: CDIT 0x00000000CD0C30B8 000029 (v01 HPQOEM 83C6
00000001 HP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CD0C30E8 000038 (v01 HPQOEM 83C6
01072009 HP 00000005)
[ 0.000000] ACPI: UEFI 0x00000000CD0C3120 000042 (v01 HPQOEM 83C6
00000000 HP 00000000)
[ 0.000000] ACPI: IVRS 0x00000000CD0C3168 0000D0 (v02 HPQOEM 83C6
00000001 HP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CD0C3238 001676 (v01 HPQOEM 83C6
00000001 ACPI 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CD0C48B0 0018E2 (v01 HPQOEM 83C6
00000001 ACPI 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000051f33ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x51f33c000-0x51f33ffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000051f33ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x0000000004010000-0x0000000009e9ffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x00000000ccfaafff]
[ 0.000000] node 0: [mem 0x00000000cdd4c000-0x00000000ceffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000051f33ffff]
[ 0.000000] Reserved but unavailable: 8053 pages
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000051f33ffff]
[ 0.000000] On node 0 totalpages: 5166027
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13124 pages used for memmap
[ 0.000000] DMA32 zone: 839919 pages, LIFO batch:31
[ 0.000000] Normal zone: 67533 pages used for memmap
[ 0.000000] Normal zone: 4322112 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI
0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI
24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x0400ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09ea0000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccfab000-0xcd096fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd097000-0xcd0c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd0c7000-0xcd59efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd59f000-0xcdd4bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfd8fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd900000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe800fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe801000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535
with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16
nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552
r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12
13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
5085285
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux
root=UUID=7bec7995-3557-480d-aee8-d9871405748d rw pci=noaer idle=nomwait
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 20231056K/20664108K available (10252K kernel code,
1297K rwdata, 3528K rodata, 1488K init, 612K bss, 433052K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 33391 entries in 131 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.003333] Switched APIC routing to physical flat.
[ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019999] tsc: Fast TSC calibration using PIT
[ 0.023333] tsc: Detected 1996.125 MHz processor
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x398bc360853, max_idle_ns: 881590429734 ns
[ 0.023333] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3993.59 BogoMIPS (lpj=6653750)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.023333] Security Framework initialized
[ 0.023333] Yama: becoming mindful.
[ 0.030426] Dentry cache hash table entries: 4194304 (order: 13,
33554432 bytes)
[ 0.033707] Inode-cache hash table entries: 2097152 (order: 12, 16777216
bytes)
[ 0.033887] Mount-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.033994] Mountpoint-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.034705] mce: CPU supports 23 MCE banks
[ 0.034729] LVT offset 1 assigned for vector 0xf9
[ 0.034796] LVT offset 2 assigned for vector 0xf4
[ 0.034810] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.034811] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.034813] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.034814] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB
on context switch
[ 0.034814] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch
Prediction Barrier
[ 0.034816] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.042325] Freeing SMP alternatives memory: 28K
[ 0.046666] smpboot: CPU0: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx
(family: 0x17, model: 0x11, stepping: 0x0)
[ 0.063354] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.063362] ... version: 0
[ 0.063363] ... bit width: 48
[ 0.063364] ... generic registers: 6
[ 0.063365] ... value mask: 0000ffffffffffff
[ 0.063366] ... max period: 00007fffffffffff
[ 0.063367] ... fixed-purpose events: 0
[ 0.063368] ... event mask: 000000000000003f
[ 0.070012] Hierarchical SRCU implementation.
[ 0.090482] NMI watchdog: Enabled. Permanently consumes one hw-PMU
counter.
[ 0.096676] smp: Bringing up secondary CPUs ...
[ 0.136716] x86: Booting SMP configuration:
[ 0.136719] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.382675] smp: Brought up 1 node, 8 CPUs
[ 0.382675] smpboot: Max logical packages: 2
[ 0.382675] smpboot: Total of 8 processors activated (31950.75 BogoMIPS)
[ 0.384034] devtmpfs: initialized
[ 0.384034] x86/mm: Memory block size: 128MB
[ 0.387974] PM: Registering ACPI NVS region [mem 0x04000000-0x0400ffff]
(65536 bytes)
[ 0.387974] PM: Registering ACPI NVS region [mem 0xcd0c7000-0xcd59efff]
(5079040 bytes)
[ 0.387974] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.387974] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.387974] pinctrl core: initialized pinctrl subsystem
[ 0.387974] RTC time: 20:56:45, date: 08/17/18
[ 0.390689] NET: Registered protocol family 16
[ 0.390824] audit: initializing netlink subsys (disabled)
[ 0.390832] audit: type=2000 audit(1534539404.389:1): state=initialized
audit_enabled=0 res=1
[ 0.390832] cpuidle: using governor ladder
[ 0.390832] cpuidle: using governor menu
[ 0.390832] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.390832] ACPI: bus type PCI registered
[ 0.390832] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.390832] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.390832] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.390832] PCI: Using configuration type 1 for base access
[ 0.390832] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.390832] mtrr: probably your BIOS does not setup all CPUs.
[ 0.390832] mtrr: corrected configuration.
[ 0.393439] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.393439] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.393569] ACPI: Added _OSI(Module Device)
[ 0.393571] ACPI: Added _OSI(Processor Device)
[ 0.393571] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.393572] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.393573] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.395212] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.417390] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.442272] ACPI: EC: EC started
[ 0.442274] ACPI: EC: interrupt blocked
[ 0.474786] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.474788] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.474791] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle
transactions
[ 0.474791] ACPI: Interpreter enabled
[ 0.474815] ACPI: (supports S0 S3 S4 S5)
[ 0.474816] ACPI: Using IOAPIC for interrupt routing
[ 0.476784] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.477446] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.482166] ACPI: Power Resource [P0ST] (on)
[ 0.482221] ACPI: Power Resource [P3ST] (on)
[ 0.489829] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.489836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.490252] acpi PNP0A08:00: _OSC: platform does not support
[SHPCHotplug LTR]
[ 0.490543] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME
PCIeCapability]
[ 0.490544] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using
BIOS configuration
[ 0.490564] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000
[bus 00-3f] only partially covers this bridge
[ 0.491144] PCI host bridge to bus 0000:00
[ 0.491147] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.491149] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.491151] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.491152] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.491154] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.491156] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff window]
[ 0.491157] pci_bus 0000:00: root bus resource [mem
0xe0000000-0xfebfffff window]
[ 0.491159] pci_bus 0000:00: root bus resource [mem
0xfee00000-0xffffffff window]
[ 0.491161] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.491173] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[ 0.491339] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[ 0.491539] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.491704] pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
[ 0.491840] pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
[ 0.491994] pci 0000:00:01.7: [1022:15d3] type 01 class 0x060400
[ 0.492129] pci 0000:00:01.7: PME# supported from D0 D3hot D3cold
[ 0.492286] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.492436] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[ 0.492493] pci 0000:00:08.1: enabling Extended Tags
[ 0.492551] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.492667] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[ 0.492724] pci 0000:00:08.2: enabling Extended Tags
[ 0.492781] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.492939] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.493189] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.493413] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[ 0.493509] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[ 0.493593] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[ 0.493692] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[ 0.493775] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[ 0.493859] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[ 0.493944] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[ 0.494027] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[ 0.494256] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
[ 0.494298] pci 0000:01:00.0: reg 0x10: [mem 0xfe300000-0xfe300fff]
[ 0.494483] pci 0000:01:00.0: supports D1 D2
[ 0.494485] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.494750] pci 0000:00:01.6: PCI bridge to [bus 01]
[ 0.494760] pci 0000:00:01.6: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.494903] pci 0000:02:00.0: [10ec:b822] type 00 class 0x028000
[ 0.494953] pci 0000:02:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.494998] pci 0000:02:00.0: reg 0x18: [mem 0xfe200000-0xfe20ffff 64bit]
[ 0.495207] pci 0000:02:00.0: supports D1 D2
[ 0.495209] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.495543] pci 0000:00:01.7: PCI bridge to [bus 02]
[ 0.495550] pci 0000:00:01.7: bridge window [io 0xf000-0xffff]
[ 0.495554] pci 0000:00:01.7: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.495714] pci 0000:03:00.0: [1002:15dd] type 00 class 0x030000
[ 0.495762] pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.495783] pci 0000:03:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit
pref]
[ 0.495796] pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.495810] pci 0000:03:00.0: reg 0x24: [mem 0xfe000000-0xfe07ffff]
[ 0.495832] pci 0000:03:00.0: enabling Extended Tags
[ 0.495940] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.496099] pci 0000:03:00.1: [1002:15de] type 00 class 0x040300
[ 0.496131] pci 0000:03:00.1: reg 0x10: [mem 0xfe088000-0xfe08bfff]
[ 0.496210] pci 0000:03:00.1: enabling Extended Tags
[ 0.496284] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.496394] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000
[ 0.496449] pci 0000:03:00.2: reg 0x18: [mem 0xfdf00000-0xfdffffff]
[ 0.496485] pci 0000:03:00.2: reg 0x24: [mem 0xfe08c000-0xfe08dfff]
[ 0.496507] pci 0000:03:00.2: enabling Extended Tags
[ 0.496684] pci 0000:03:00.3: [1022:15e0] type 00 class 0x0c0330
[ 0.496723] pci 0000:03:00.3: reg 0x10: [mem 0xfde00000-0xfdefffff 64bit]
[ 0.496790] pci 0000:03:00.3: enabling Extended Tags
[ 0.496872] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 0.496982] pci 0000:03:00.4: [1022:15e1] type 00 class 0x0c0330
[ 0.497021] pci 0000:03:00.4: reg 0x10: [mem 0xfdd00000-0xfddfffff 64bit]
[ 0.497088] pci 0000:03:00.4: enabling Extended Tags
[ 0.497169] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
[ 0.497280] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300
[ 0.497312] pci 0000:03:00.6: reg 0x10: [mem 0xfe080000-0xfe087fff]
[ 0.497391] pci 0000:03:00.6: enabling Extended Tags
[ 0.497464] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold
[ 0.497610] pci 0000:00:08.1: PCI bridge to [bus 03]
[ 0.497616] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.497620] pci 0000:00:08.1: bridge window [mem 0xfdd00000-0xfe0fffff]
[ 0.497627] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff
64bit pref]
[ 0.497737] pci 0000:04:00.0: [1022:7901] type 00 class 0x010601
[ 0.497828] pci 0000:04:00.0: reg 0x24: [mem 0xfe100000-0xfe1007ff]
[ 0.497850] pci 0000:04:00.0: enabling Extended Tags
[ 0.497932] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.498052] pci 0000:00:08.2: PCI bridge to [bus 04]
[ 0.498061] pci 0000:00:08.2: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.498527] ACPI: IRQ 7 override to edge, high
[ 0.498689] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.498802] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.498900] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.499016] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.499123] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.499206] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.499289] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.499372] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.500594] ACPI: EC: interrupt unblocked
[ 0.500625] ACPI: EC: event unblocked
[ 0.500646] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.500648] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle
transactions and events
[ 0.503358] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.503362] pci 0000:03:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.503365] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.503366] vgaarb: loaded
[ 0.505741] pps_core: LinuxPPS API ver. 1 registered
[ 0.505741] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti at linux.it>
[ 0.505741] PTP clock support registered
[ 0.505741] EDAC MC: Ver: 3.0.0
[ 0.506733] PCI: Using ACPI for IRQ routing
[ 0.510850] PCI: pci_cache_line_size set to 64 bytes
[ 0.511073] Expanded resource Reserved due to conflict with PCI Bus
0000:00
[ 0.511076] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.511078] e820: reserve RAM buffer [mem 0x09ea0000-0x0bffffff]
[ 0.511079] e820: reserve RAM buffer [mem 0xccfab000-0xcfffffff]
[ 0.511080] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[ 0.511081] e820: reserve RAM buffer [mem 0x51f340000-0x51fffffff]
[ 0.511240] NetLabel: Initializing
[ 0.511241] NetLabel: domain hash size = 128
[ 0.511241] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.511258] NetLabel: unlabeled traffic allowed by default
[ 0.511263] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.511263] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.515621] clocksource: Switched to clocksource tsc-early
[ 0.530866] VFS: Disk quotas dquot_6.6.0
[ 0.530923] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.531072] pnp: PnP ACPI init
[ 0.531316] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.531323] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.531440] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be
reserved
[ 0.531444] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531608] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.531723] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303
(active)
[ 0.531752] pnp 00:04: Plug and Play ACPI device, IDs SYN324e ETD0000
PNP0f13 (active)
[ 0.532131] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.532134] system 00:05: [io 0x040b] has been reserved
[ 0.532135] system 00:05: [io 0x04d6] has been reserved
[ 0.532137] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.532139] system 00:05: [io 0x0c14] has been reserved
[ 0.532149] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.532151] system 00:05: [io 0x0c52] has been reserved
[ 0.532153] system 00:05: [io 0x0c6c] has been reserved
[ 0.532155] system 00:05: [io 0x0c6f] has been reserved
[ 0.532156] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.532158] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.532160] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.532162] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.532163] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.532165] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.532167] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.532168] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.532170] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.532172] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.532175] system 00:05: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.532177] system 00:05: [mem 0xfec01000-0xfec01fff] could not be
reserved
[ 0.532179] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.532181] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.532183] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be
reserved
[ 0.532185] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.532187] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.532191] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.532918] pnp: PnP ACPI: found 6 devices
[ 0.544268] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.544287] pci 0000:00:01.6: bridge window [io 0x1000-0x0fff] to [bus
01] add_size 1000
[ 0.544290] pci 0000:00:01.6: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.544326] pci 0000:00:01.6: BAR 15: assigned [mem
0xf0200000-0xf03fffff 64bit pref]
[ 0.544331] pci 0000:00:01.6: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.544333] pci 0000:00:01.6: PCI bridge to [bus 01]
[ 0.544336] pci 0000:00:01.6: bridge window [io 0x1000-0x1fff]
[ 0.544342] pci 0000:00:01.6: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.544347] pci 0000:00:01.6: bridge window [mem 0xf0200000-0xf03fffff
64bit pref]
[ 0.544354] pci 0000:00:01.7: PCI bridge to [bus 02]
[ 0.544357] pci 0000:00:01.7: bridge window [io 0xf000-0xffff]
[ 0.544363] pci 0000:00:01.7: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.544374] pci 0000:00:08.1: PCI bridge to [bus 03]
[ 0.544377] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.544382] pci 0000:00:08.1: bridge window [mem 0xfdd00000-0xfe0fffff]
[ 0.544386] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff
64bit pref]
[ 0.544394] pci 0000:00:08.2: PCI bridge to [bus 04]
[ 0.544400] pci 0000:00:08.2: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.544411] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.544413] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.544414] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.544416] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.544418] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff
window]
[ 0.544419] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff
window]
[ 0.544421] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfebfffff
window]
[ 0.544422] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff
window]
[ 0.544424] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.544426] pci_bus 0000:01: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.544427] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit
pref]
[ 0.544429] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.544431] pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.544432] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.544434] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfe0fffff]
[ 0.544435] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf01fffff 64bit
pref]
[ 0.544437] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.544681] NET: Registered protocol family 2
[ 0.545002] tcp_listen_portaddr_hash hash table entries: 16384 (order:
6, 262144 bytes)
[ 0.545117] TCP established hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.545602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.545767] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.545847] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.545950] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.546165] NET: Registered protocol family 1
[ 0.546171] NET: Registered protocol family 44
[ 0.546316] pci 0000:03:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.546341] pci 0000:03:00.1: Linked as a consumer to 0000:03:00.0
[ 0.546871] PCI: CLS 64 bytes, default 64
[ 0.546934] Unpacking initramfs...
[ 0.911016] Freeing initrd memory: 17360K
[ 0.911052] AMD-Vi: Unable to write to IOMMU perf counter.
[ 0.911200] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.911202] pci 0000:00:00.2: PCI INT A: not connected
[ 0.911705] iommu: Adding device 0000:00:01.0 to group 0
[ 0.911956] iommu: Adding device 0000:00:01.6 to group 1
[ 0.912188] iommu: Adding device 0000:00:01.7 to group 2
[ 0.912429] iommu: Adding device 0000:00:08.0 to group 3
[ 0.912462] iommu: Adding device 0000:00:08.1 to group 3
[ 0.912493] iommu: Adding device 0000:00:08.2 to group 3
[ 0.912709] iommu: Adding device 0000:00:14.0 to group 4
[ 0.912753] iommu: Adding device 0000:00:14.3 to group 4
[ 0.913001] iommu: Adding device 0000:00:18.0 to group 5
[ 0.913072] iommu: Adding device 0000:00:18.1 to group 5
[ 0.913104] iommu: Adding device 0000:00:18.2 to group 5
[ 0.913136] iommu: Adding device 0000:00:18.3 to group 5
[ 0.913169] iommu: Adding device 0000:00:18.4 to group 5
[ 0.913205] iommu: Adding device 0000:00:18.5 to group 5
[ 0.913237] iommu: Adding device 0000:00:18.6 to group 5
[ 0.913268] iommu: Adding device 0000:00:18.7 to group 5
[ 0.913542] iommu: Adding device 0000:01:00.0 to group 6
[ 0.913834] iommu: Adding device 0000:02:00.0 to group 7
[ 0.913922] iommu: Adding device 0000:03:00.0 to group 3
[ 0.914008] iommu: Adding device 0000:03:00.1 to group 3
[ 0.914077] iommu: Adding device 0000:03:00.2 to group 3
[ 0.914145] iommu: Adding device 0000:03:00.3 to group 3
[ 0.914214] iommu: Adding device 0000:03:00.4 to group 3
[ 0.914284] iommu: Adding device 0000:03:00.6 to group 3
[ 0.914355] iommu: Adding device 0000:04:00.0 to group 3
[ 0.914669] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.914671] AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.914671] PPR NX GT IA GA PC GA_vAPIC
[ 0.914675] AMD-Vi: Interrupt remapping enabled
[ 0.914676] AMD-Vi: virtual APIC enabled
[ 1.010883] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.012398] amd_uncore: AMD NB counters detected
[ 1.012403] amd_uncore: AMD LLC counters detected
[ 1.013727] Scanning for low memory corruption every 60 seconds
[ 1.015077] Initialise system trusted keyrings
[ 1.015136] Key type blacklist registered
[ 1.015279] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 1.017304] zbud: loaded
[ 1.017688] pstore: using lz4hc compression
[ 1.022492] Key type asymmetric registered
[ 1.022494] Asymmetric key parser 'x509' registered
[ 1.022571] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 245)
[ 1.022738] io scheduler noop registered
[ 1.022740] io scheduler deadline registered
[ 1.022870] io scheduler cfq registered (default)
[ 1.022871] io scheduler mq-deadline registered
[ 1.022872] io scheduler kyber registered
[ 1.022933] io scheduler bfq registered
[ 1.024743] pcieport 0000:00:01.6: Signaling PME with IRQ 26
[ 1.024776] pcieport 0000:00:01.7: Signaling PME with IRQ 27
[ 1.024820] pcieport 0000:00:08.1: Signaling PME with IRQ 28
[ 1.024857] pcieport 0000:00:08.2: Signaling PME with IRQ 29
[ 1.024888] pciehp 0000:00:01.6:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[ 1.024934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.025017] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.025018] vesafb: scrolling: redraw
[ 1.025020] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.025036] vesafb: framebuffer at 0xe0000000, mapped to
0x(____ptrval____), using 8128k, total 8128k
[ 1.117288] Console: switching to colour frame buffer device 240x67
[ 1.167604] fb0: VESA VGA frame buffer device
[ 1.167704] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.167714] ACPI: Power Button [PWRB]
[ 1.167765] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.167771] ACPI: Lid Switch [LID0]
[ 1.167823] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.167839] ACPI: Power Button [PWRF]
[ 1.167969] ACPI: Video Device [VGA2] (multi-head: yes rom: no post:
no)
[ 1.168298] acpi device:16: registered as cooling_device0
[ 1.168357] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/LNXVIDEO:02/input/input3
[ 1.168406] Monitor-Mwait will be used to enter C-1 state
[ 1.174071] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.174073] ACPI: Thermal Zone [TZS0] (54 C)
[ 1.174580] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.174581] ACPI: Thermal Zone [TZS1] (49 C)
[ 1.175186] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.177754] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.178519] NET: Registered protocol family 10
[ 1.184065] Segment Routing with IPv6
[ 1.184093] NET: Registered protocol family 17
[ 1.185071] RAS: Correctable Errors collector initialized.
[ 1.186575] microcode: CPU0: patch_level=0x08101007
[ 1.186587] microcode: CPU1: patch_level=0x08101007
[ 1.186591] microcode: CPU2: patch_level=0x08101007
[ 1.186600] microcode: CPU3: patch_level=0x08101007
[ 1.186914] microcode: CPU4: patch_level=0x08101007
[ 1.186923] microcode: CPU5: patch_level=0x08101007
[ 1.186948] microcode: CPU6: patch_level=0x08101007
[ 1.186956] microcode: CPU7: patch_level=0x08101007
[ 1.187070] microcode: Microcode Update Driver: v2.2.
[ 1.187100] sched_clock: Marking stable (1187064456, 0)->(1382906531,
-195842075)
[ 1.187642] registered taskstats version 1
[ 1.187653] Loading compiled-in X.509 certificates
[ 1.187682] zswap: loaded using pool lzo/zbud
[ 1.192243] Key type big_key registered
[ 1.192907] Magic number: 14:303:953
[ 1.192989] memory memory6: hash matches
[ 1.192995] hctosys: unable to open rtc device (rtc0)
[ 1.587197] Freeing unused kernel memory: 1488K
[ 1.587199] Write protecting the kernel read-only data: 16384k
[ 1.589231] Freeing unused kernel memory: 2016K
[ 1.591200] Freeing unused kernel memory: 568K
[ 1.693784] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.700440] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.700528] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.702175] cryptd: max_cpu_qlen set to 1000
[ 1.705654] ACPI: bus type USB registered
[ 1.705698] usbcore: registered new interface driver usbfs
[ 1.705711] usbcore: registered new interface driver hub
[ 1.705782] usbcore: registered new device driver usb
[ 1.706708] AVX2 version of gcm_enc/dec engaged.
[ 1.706711] AES CTR mode by8 optimization enabled
[ 1.707948] SCSI subsystem initialized
[ 1.713077] xhci_hcd 0000:03:00.3: xHCI Host Controller
[ 1.713087] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus
number 1
[ 1.713279] xhci_hcd 0000:03:00.3: hcc params 0x0270ffe5 hci version
0x110 quirks 0x0000000040000410
[ 1.714026] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 4.18
[ 1.714028] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.714030] usb usb1: Product: xHCI Host Controller
[ 1.714031] usb usb1: Manufacturer: Linux 4.18.1-arch1-1-ARCH xhci-hcd
[ 1.714033] usb usb1: SerialNumber: 0000:03:00.3
[ 1.714230] hub 1-0:1.0: USB hub found
[ 1.714250] hub 1-0:1.0: 4 ports detected
[ 1.714320] libata version 3.00 loaded.
[ 1.715393] xhci_hcd 0000:03:00.3: xHCI Host Controller
[ 1.715403] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus
number 2
[ 1.715410] xhci_hcd 0000:03:00.3: Host supports USB 3.10 Enhanced
SuperSpeed
[ 1.715440] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 1.715470] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 4.18
[ 1.715472] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.715474] usb usb2: Product: xHCI Host Controller
[ 1.715476] usb usb2: Manufacturer: Linux 4.18.1-arch1-1-ARCH xhci-hcd
[ 1.715478] usb usb2: SerialNumber: 0000:03:00.3
[ 1.715676] hub 2-0:1.0: USB hub found
[ 1.715693] hub 2-0:1.0: 4 ports detected
[ 1.716382] ahci 0000:04:00.0: version 3.0
[ 1.716998] xhci_hcd 0000:03:00.4: xHCI Host Controller
[ 1.717004] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus
number 3
[ 1.717143] xhci_hcd 0000:03:00.4: hcc params 0x0260ffe5 hci version
0x110 quirks 0x0000000040000410
[ 1.717762] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 4.18
[ 1.717764] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.717765] usb usb3: Product: xHCI Host Controller
[ 1.717767] usb usb3: Manufacturer: Linux 4.18.1-arch1-1-ARCH xhci-hcd
[ 1.717768] usb usb3: SerialNumber: 0000:03:00.4
[ 1.718003] hub 3-0:1.0: USB hub found
[ 1.718023] hub 3-0:1.0: 2 ports detected
[ 1.718718] xhci_hcd 0000:03:00.4: xHCI Host Controller
[ 1.718724] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus
number 4
[ 1.718729] xhci_hcd 0000:03:00.4: Host supports USB 3.10 Enhanced
SuperSpeed
[ 1.718758] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 1.718793] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 4.18
[ 1.718796] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.718798] usb usb4: Product: xHCI Host Controller
[ 1.718800] usb usb4: Manufacturer: Linux 4.18.1-arch1-1-ARCH xhci-hcd
[ 1.718802] usb usb4: SerialNumber: 0000:03:00.4
[ 1.719007] hub 4-0:1.0: USB hub found
[ 1.719029] hub 4-0:1.0: 1 port detected
[ 1.727051] ahci 0000:04:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps
0x3 impl SATA mode
[ 1.727056] ahci 0000:04:00.0: flags: 64bit ncq sntf ilck pm led clo
only pmp fbs pio slum part deso sadm sds
[ 1.727060] ahci 0000:04:00.0: both AHCI_HFLAG_MULTI_MSI flag set and
custom irq handler implemented
[ 1.727653] scsi host0: ahci
[ 1.728020] scsi host1: ahci
[ 1.728091] ata1: SATA max UDMA/133 abar m2048 at 0xfe100000 port
0xfe100100 irq 42
[ 1.728095] ata2: SATA max UDMA/133 abar m2048 at 0xfe100000 port
0xfe100180 irq 43
[ 1.732184] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 2.023780] tsc: Refined TSC clocksource calibration: 1996.241 MHz
[ 2.023798] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x398c9e7ced1, max_idle_ns: 881590497691 ns
[ 2.024830] clocksource: Switched to clocksource tsc
[ 2.043386] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 2.046708] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2.189006] usb 3-2: New USB device found, idVendor=05e3,
idProduct=0608, bcdDevice=88.32
[ 2.189009] usb 3-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.189011] usb 3-2: Product: USB2.0 Hub
[ 2.196740] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.196782] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.197553] ata1.00: ATA-9: WDC WDS240G2G0B-00EPW0, UJ190000, max
UDMA/133
[ 2.197557] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 32)
[ 2.199116] ata2.00: ATA-9: HGST HTS721010A9E630, JB0OA3T0, max UDMA/133
[ 2.199119] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32),
AA
[ 2.201241] ata2.00: configured for UDMA/133
[ 2.202935] ata1.00: configured for UDMA/133
[ 2.203630] scsi 0:0:0:0: Direct-Access ATA WDC WDS240G2G0B-
0000 PQ: 0 ANSI: 5
[ 2.204339] scsi 1:0:0:0: Direct-Access ATA HGST HTS721010A9
A3T0 PQ: 0 ANSI: 5
[ 2.207091] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/932 GiB)
[ 2.207093] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.207097] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240
GB/224 GiB)
[ 2.207112] sd 0:0:0:0: [sda] Write Protect is off
[ 2.207114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.207117] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.207121] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.207141] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.207168] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.207822] sda: sda1 sda2
[ 2.208207] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.224862] usb 1-4: New USB device found, idVendor=04f2,
idProduct=b593, bcdDevice= 0.10
[ 2.224865] usb 1-4: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 2.224868] usb 1-4: Product: HP Wide Vision FHD Camera
[ 2.224869] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.224871] usb 1-4: SerialNumber: 1
[ 2.232069] hub 3-2:1.0: USB hub found
[ 2.232528] hub 3-2:1.0: 4 ports detected
[ 2.504296] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 2.506059] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.523952] usb 3-2.3: new full-speed USB device number 3 using xhci_hcd
[ 2.603357] raid6: sse2x1 gen() 4685 MB/s
[ 2.638832] usb 3-2.3: New USB device found, idVendor=0483,
idProduct=91d1, bcdDevice= 1.11
[ 2.638835] usb 3-2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.638838] usb 3-2.3: Product: ST_SENSOR_HUB
[ 2.638840] usb 3-2.3: Manufacturer: STMicroelectronics
[ 2.638842] usb 3-2.3: SerialNumber: ST_SENSOR_HUB
[ 2.660009] raid6: sse2x1 xor() 4196 MB/s
[ 2.683660] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.698867] usbcore: registered new interface driver usbhid
[ 2.698868] usbhid: USB HID core driver
[ 2.702700] hid-generic 0003:0483:91D1.0001: hiddev0,hidraw0: USB HID
v1.10 Device [STMicroelectronics ST_SENSOR_HUB] on
usb-0000:03:00.4-2.3/input0
[ 2.716685] raid6: sse2x2 gen() 8136 MB/s
[ 2.753354] usb 3-2.4: new full-speed USB device number 4 using xhci_hcd
[ 2.773347] raid6: sse2x2 xor() 5703 MB/s
[ 2.830018] raid6: sse2x4 gen() 9263 MB/s
[ 2.850856] random: fast init done
[ 2.865856] usb 3-2.4: New USB device found, idVendor=0bda,
idProduct=b00b, bcdDevice= 1.10
[ 2.865859] usb 3-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.865861] usb 3-2.4: Product: Bluetooth Radio
[ 2.865863] usb 3-2.4: Manufacturer: Realtek
[ 2.865865] usb 3-2.4: SerialNumber: 00e04c000001
[ 2.886671] raid6: sse2x4 xor() 5370 MB/s
[ 2.943341] raid6: avx2x1 gen() 10008 MB/s
[ 3.000004] raid6: avx2x1 xor() 7566 MB/s
[ 3.056676] raid6: avx2x2 gen() 12642 MB/s
[ 3.113375] raid6: avx2x2 xor() 8141 MB/s
[ 3.170007] raid6: avx2x4 gen() 13201 MB/s
[ 3.226684] raid6: avx2x4 xor() 7591 MB/s
[ 3.226686] raid6: using algorithm avx2x4 gen() 13201 MB/s
[ 3.226686] raid6: .... xor() 7591 MB/s, rmw enabled
[ 3.226688] raid6: using avx2x2 recovery algorithm
[ 3.231400] xor: automatically using best checksumming function avx
[ 3.261457] Btrfs loaded, crc32c=crc32c-intel
[ 3.262181] BTRFS: device label root devid 1 transid 138955 /dev/sda2
[ 3.262245] BTRFS: device label ARQUIVOS devid 1 transid 1514 /dev/sdb6
[ 3.286065] device-mapper: uevent: version 1.0.3
[ 3.286930] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised:
dm-devel at redhat.com
[ 3.326186] BTRFS info (device sda2): disk space caching is enabled
[ 3.326188] BTRFS info (device sda2): has skinny extents
[ 3.433912] BTRFS info (device sda2): enabling ssd optimizations
[ 3.710486] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT
-SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2
default-hierarchy=hybrid)
[ 3.729359] systemd[1]: Detected architecture x86-64.
[ 3.745495] systemd[1]: Set hostname to <braulio-laptop>.
[ 3.904599] systemd[1]: /etc/systemd/system/rc-local.service:11: Support
for option SysVStartPriority= has been removed and it is ignored
[ 3.908859] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.909004] systemd[1]: Listening on Journal Socket.
[ 3.909802] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.909858] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 3.910816] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.910899] systemd[1]: Listening on udev Kernel Socket.
[ 3.911721] systemd[1]: Listening on Journal Audit Socket.
[ 3.912428] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 3.913345] systemd[1]: Reached target Local Encrypted Volumes.
[ 4.043824] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.043873] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.058177] vboxdrv: loading out-of-tree module taints kernel.
[ 4.066401] vboxdrv: Found 8 processor cores
[ 4.087570] vboxdrv: TSC mode is Invariant, tentative frequency
1996214607 Hz
[ 4.087572] vboxdrv: Successfully loaded version 5.2.18 (interface
0x00290001)
[ 4.134788] VBoxPciLinuxInit
[ 4.134793] vboxpci: IOMMU found
[ 4.153543] VBoxNetAdp: Successfully started.
[ 4.156063] VBoxNetFlt: Successfully started.
[ 4.228852] BTRFS info (device sda2): use zstd compression, level 0
[ 4.228857] BTRFS info (device sda2): turning on discard
[ 4.228859] BTRFS info (device sda2): enabling auto defrag
[ 4.228863] BTRFS info (device sda2): using default commit interval 30s
[ 4.228866] BTRFS info (device sda2): disk space caching is enabled
[ 4.462103] systemd-journald[326]: Received request to flush runtime
journal from PID 1
[ 5.121602] acpi_cpufreq: overriding BIOS provided _PSD data
[ 5.122273] input: HP Wireless hotkeys as /devices/virtual/input/input6
[ 5.123288] amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
[ 5.149916] amd_gpio: probe of AMDI0030:00 failed with error -22
[ 5.150563] cmi: probe of SMB0001:00 failed with error -5
[ 5.160559] rtc_cmos 00:02: RTC can wake from S4
[ 5.160942] rtc_cmos 00:02: registered as rtc0
[ 5.160985] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 5.168738] hp_accel: laptop model unknown, using default axes
configuration
[ 5.176315] ACPI: AC Adapter [ADP1] (on-line)
[ 5.177353] acpi PNP0C14:01: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 5.198504] lis3lv02d: unknown sensor type 0x0
[ 5.201864] ACPI: Battery Slot [BAT0] (battery present)
[ 5.224865] hp_accel: probe of HPQ6007:00 failed with error -22
[ 5.225183] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 5.225185] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port
selection
[ 5.236121] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 5.236277] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO
address
[ 5.236286] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 5.307238] Linux agpgart interface v0.103
[ 5.352229] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 5.373943] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.376409] platform regulatory.0: Direct firmware load for
regulatory.db failed with error -2
[ 5.376415] cfg80211: failed to load regulatory.db
[ 5.423514] kvm: Nested Virtualization enabled
[ 5.423532] kvm: Nested Paging enabled
[ 5.423533] SVM: Virtual VMLOAD VMSAVE supported
[ 5.423534] SVM: Virtual GIF supported
[ 5.430041] MCE: In-kernel MCE decoding enabled.
[ 5.437041] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.437044] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side
effects.)
[ 5.442151] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio
client
[ 5.459035] media: Linux media interface: v0.10
[ 5.491789] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input8
[ 5.491931] input: HD-Audio Generic HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input9
[ 5.492125] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC295:
line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 5.492128] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 5.492130] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 5.492132] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 5.492133] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 5.492136] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 5.492138] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 5.494688] random: crng init done
[ 5.494690] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.535897] videodev: Linux video capture interface: v2.00
[ 5.547522] input: HD-Audio Generic Mic as
/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input10
[ 5.547602] input: HD-Audio Generic Headphone as
/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input11
[ 5.550829] Bluetooth: Core ver 2.22
[ 5.550858] NET: Registered protocol family 31
[ 5.550860] Bluetooth: HCI device and connection manager initialized
[ 5.550867] Bluetooth: HCI socket layer initialized
[ 5.550871] Bluetooth: L2CAP socket layer initialized
[ 5.550902] Bluetooth: SCO socket layer initialized
[ 5.555966] ACPI Error: Field [D128] at bit offset/length 128/1024
exceeds size of target Buffer (160 bits) (20180531/dsopcode-201)
[ 5.556313] r8822be: module is from the staging directory, the quality
is unknown, you have been warned.
[ 5.568568] ACPI Error: Method parse/execution failed \HWMC,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.579798] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.580019] ACPI Error: Field [D128] at bit offset/length 128/1024
exceeds size of target Buffer (160 bits) (20180531/dsopcode-201)
[ 5.604033] ACPI Error: Method parse/execution failed \HWMC,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.604059] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.604273] ACPI Error: Field [D128] at bit offset/length 128/1024
exceeds size of target Buffer (160 bits) (20180531/dsopcode-201)
[ 5.604284] ACPI Error: Method parse/execution failed \HWMC,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.604298] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.604426] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 5.604991] ACPI Error: Field [D128] at bit offset/length 128/1024
exceeds size of target Buffer (160 bits) (20180531/dsopcode-201)
[ 5.605029] ACPI Error: Method parse/execution failed \HWMC,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.605268] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.605275] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[ 5.605919] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.606195] ACPI Error: Field [D128] at bit offset/length 128/1024
exceeds size of target Buffer (160 bits) (20180531/dsopcode-201)
[ 5.606211] ACPI Error: Method parse/execution failed \HWMC,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.606228] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA,
AE_AML_BUFFER_LIMIT (20180531/psparse-516)
[ 5.625595] r8822be: Using firmware rtlwifi/rtl8822befw.bin
[ 5.795068] usbcore: registered new interface driver btusb
[ 5.796265] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.797209] r8822be: rtlwifi: wireless switch is on
[ 5.798127] Bluetooth: hci0: rtl: examining hci_ver=07 hci_rev=000b
lmp_ver=07 lmp_subver=8822
[ 5.798131] Bluetooth: hci0: rtl: loading rtl_bt/rtl8822b_config.bin
[ 5.798797] Bluetooth: hci0: rtl: loading rtl_bt/rtl8822b_fw.bin
[ 5.798821] uvcvideo: Found UVC 1.00 device HP Wide Vision FHD Camera
(04f2:b593)
[ 5.799878] r8822be 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.802110] Bluetooth: hci0: rom_version status=0 version=2
[ 5.802128] Bluetooth: hci0: cfg_sz 14, total size 20270
[ 5.806923] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not
initialized!
[ 5.806926] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was
not initialized!
[ 5.806928] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not
initialized!
[ 5.807084] input: HP Wide Vision FHD Camera: HP W as
/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-4/1-4:1.0/input/input13
[ 5.807774] uvcvideo: Found UVC 1.00 device HP Wide Vision FHD Camera
(04f2:b593)
[ 5.809803] uvcvideo: Unable to create debugfs 1-2 directory.
[ 5.810025] uvcvideo 1-4:1.2: Entity type for entity Extension 10 was
not initialized!
[ 5.810029] uvcvideo 1-4:1.2: Entity type for entity Extension 12 was
not initialized!
[ 5.810031] uvcvideo 1-4:1.2: Entity type for entity Processing 9 was
not initialized!
[ 5.810033] uvcvideo 1-4:1.2: Entity type for entity Camera 11 was not
initialized!
[ 5.810151] input: HP Wide Vision FHD Camera: HP I as
/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-4/1-4:1.2/input/input14
[ 5.810338] usbcore: registered new interface driver uvcvideo
[ 5.810339] USB Video Class driver (1.1.1)
[ 5.854696] [drm] amdgpu kernel modesetting enabled.
[ 5.864294] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[ 5.882960] Parsing CRAT table with 1 nodes
[ 5.882965] Ignoring ACPI CRAT on non-APU system
[ 5.882976] Virtual CRAT table created for CPU
[ 5.882977] Parsing CRAT table with 1 nodes
[ 5.882978] Creating topology SYSFS entries
[ 5.882992] Topology: Add CPU node
[ 5.882993] Finished initializing topology
[ 5.883079] kfd kfd: Initialized module
[ 5.883552] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 5.883554] fb: switching to amdgpudrmfb from VESA VGA
[ 5.883590] Console: switching to colour dummy device 80x25
[ 5.884118] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD
0x103C:0x83C6 0xC4).
[ 5.884137] [drm] register mmio base: 0xFE000000
[ 5.884138] [drm] register mmio size: 524288
[ 5.884160] [drm] probing gen 2 caps for device 1022:15db = 700d03/e
[ 5.884166] [drm] probing mlw for device 1022:15db = 700d03
[ 5.884169] [drm] add ip block number 0 <soc15_common>
[ 5.884170] [drm] add ip block number 1 <gmc_v9_0>
[ 5.884172] [drm] add ip block number 2 <vega10_ih>
[ 5.884173] [drm] add ip block number 3 <psp>
[ 5.884174] [drm] add ip block number 4 <powerplay>
[ 5.884175] [drm] add ip block number 5 <dm>
[ 5.884176] [drm] add ip block number 6 <gfx_v9_0>
[ 5.884177] [drm] add ip block number 7 <sdma_v4_0>
[ 5.884178] [drm] add ip block number 8 <vcn_v1_0>
[ 5.886483] kfd kfd: DID 15dd is missing in supported_devices
[ 5.886487] kfd kfd: kgd2kfd_probe failed
[ 5.886511] [drm] VCN decode is enabled in VM mode
[ 5.886512] [drm] VCN encode is enabled in VM mode
[ 5.915648] [drm] BIOS signature incorrect 0 0
[ 5.915690] ATOM BIOS: SWBRT25890.001
[ 5.915733] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit,
fragment size is 9-bit
[ 5.915747] amdgpu 0000:03:00.0: VRAM: 256M 0x000000F400000000 -
0x000000F40FFFFFFF (256M used)
[ 5.915749] amdgpu 0000:03:00.0: GTT: 1024M 0x000000F500000000 -
0x000000F53FFFFFFF
[ 5.915754] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.915755] [drm] RAM width 128bits UNKNOWN
[ 5.916307] [TTM] Zone kernel: Available graphics memory: 10159234 kiB
[ 5.916309] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 5.916310] [TTM] Initializing pool allocator
[ 5.916316] [TTM] Initializing DMA pool allocator
[ 5.916359] [drm] amdgpu: 256M of VRAM memory ready
[ 5.916361] [drm] amdgpu: 3072M of GTT memory ready.
[ 5.916377] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 5.916630] [drm] PCIE GART of 1024M enabled (table at
0x000000F400900000).
[ 5.932793] [drm] use_doorbell being set to: [true]
[ 5.935374] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[ 6.015126] psmouse serio1: synaptics: queried max coordinates: x
[..5640], y [..4740]
[ 6.042491] psmouse serio1: synaptics: queried min coordinates: x
[1302..], y [1116..]
[ 6.042501] psmouse serio1: synaptics: Your touchpad (PNP: SYN324e
ETD0000 PNP0f13) says it can support a different bus. If i2c-hid and
hid-rmi are not used, you might want to try setting
psmouse.synaptics_intertouch to 1 and report this to
linux-input at vger.kernel.org.
[ 6.070325] BTRFS info (device sdb6): use zstd compression, level 0
[ 6.070329] BTRFS info (device sdb6): enabling auto defrag
[ 6.070333] BTRFS info (device sdb6): using default commit interval 30s
[ 6.070337] BTRFS info (device sdb6): disk space caching is enabled
[ 6.070339] BTRFS info (device sdb6): has skinny extents
[ 6.094400] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id:
0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x400000, board id: 3314, fw id:
2544170
[ 6.128063] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 6.140472] mousedev: PS/2 mouse device common for all mice
[ 6.196628] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: stripe=4
[ 6.603711] amdgpu: [powerplay] dpm has been enabled
[ 6.604078] [drm:construct [amdgpu]] *ERROR* construct: Invalid
Connector ObjectID from Adapter Service for connector index:2! type 0
expected 3
[ 6.621349] [drm] Display Core initialized with v3.1.44!
[ 6.627947] [drm] SADs count is: -2, don't need to read it
[ 6.629081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.629082] [drm] Driver supports precise vblank timestamp query.
[ 6.653040] [drm] VCN decode and encode initialized successfully.
[ 6.656014] [drm] fb mappable at 0xD1100000
[ 6.656017] [drm] vram apper at 0xD0000000
[ 6.656018] [drm] size 8294400
[ 6.656019] [drm] fb depth is 24
[ 6.656020] [drm] pitch is 7680
[ 6.656149] fbcon: amdgpudrmfb (fb0) is primary device
[ 6.671592] Console: switching to colour frame buffer device 240x67
[ 6.693572] amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
[ 6.721247] amdgpu 0000:03:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
[ 6.721251] amdgpu 0000:03:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on
hub 0
[ 6.721254] amdgpu 0000:03:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on
hub 0
[ 6.721256] amdgpu 0000:03:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on
hub 0
[ 6.721258] amdgpu 0000:03:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on
hub 0
[ 6.721260] amdgpu 0000:03:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on
hub 0
[ 6.721263] amdgpu 0000:03:00.0: ring 6(comp_1.1.1) uses VM inv eng 10
on hub 0
[ 6.721265] amdgpu 0000:03:00.0: ring 7(comp_1.2.1) uses VM inv eng 11
on hub 0
[ 6.721267] amdgpu 0000:03:00.0: ring 8(comp_1.3.1) uses VM inv eng 12
on hub 0
[ 6.721270] amdgpu 0000:03:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on
hub 0
[ 6.721272] amdgpu 0000:03:00.0: ring 10(sdma0) uses VM inv eng 4 on hub
1
[ 6.721274] amdgpu 0000:03:00.0: ring 11(vcn_dec) uses VM inv eng 5 on
hub 1
[ 6.721276] amdgpu 0000:03:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on
hub 1
[ 6.721279] amdgpu 0000:03:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on
hub 1
[ 6.725754] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:03:00.0 on
minor 0
[ 8.246458] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.246460] Bluetooth: BNEP filters: protocol multicast
[ 8.246465] Bluetooth: BNEP socket layer initialized
[ 9.870932] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.472458] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.472503] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you need
this.
[ 10.946394] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.947022] Bridge firewalling registered
[ 11.044179] bpfilter: Loaded bpfilter_umh pid 859
[ 11.049265] audit: type=1325 audit(1534539415.044:2): table=filter
family=2 entries=0
[ 11.049591] audit: type=1300 audit(1534539415.044:2): arch=c000003e
syscall=175 success=yes exit=0 a0=55555577d8e0 a1=2308 a2=55555556fde6
a3=555555779010 items=0 ppid=348 pid=861 auid=4294967295 uid=0 gid=0 euid=0
suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295
comm="modprobe" exe="/usr/bin/kmod" key=(null)
[ 11.049595] audit: type=1327 audit(1534539415.044:2):
proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[ 11.074989] audit: type=1325 audit(1534539415.071:3): table=nat family=2
entries=0
[ 11.075271] audit: type=1300 audit(1534539415.071:3): arch=c000003e
syscall=175 success=yes exit=0 a0=55555577e400 a1=21e8 a2=55555556fde6
a3=555555779010 items=0 ppid=89 pid=867 auid=4294967295 uid=0 gid=0 euid=0
suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295
comm="modprobe" exe="/usr/bin/kmod" key=(null)
[ 11.075274] audit: type=1327 audit(1534539415.071:3):
proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
[ 11.075295] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 11.118283] audit: type=1325 audit(1534539415.114:4): table=nat family=2
entries=5
[ 11.118290] audit: type=1300 audit(1534539415.114:4): arch=c000003e
syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=5555557d2a50 items=0
ppid=584 pid=896 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0
sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables"
exe="/usr/bin/xtables-multi" key=(null)
[ 11.118293] audit: type=1327 audit(1534539415.114:4):
proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552
[ 11.124243] audit: type=1325 audit(1534539415.121:5): table=filter
family=2 entries=4
[ 11.559137] Initializing XFRM netlink socket
[ 11.651373] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 11.753737] fuse init (API version 7.27)
[ 16.329392] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.345775] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.819658] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.032546] Bluetooth: RFCOMM TTY layer initialized
[ 18.032554] Bluetooth: RFCOMM socket layer initialized
[ 18.032561] Bluetooth: RFCOMM ver 1.11
[ 19.991177] show_signal_msg: 116 callbacks suppressed
[ 19.991183] core[1450]: segfault at 0 ip 0000000000441058 sp
00007fffffffd2f0 error 4
[ 19.991187] Code: 40 00 31 c0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00
55 48 89 f5 53 48 89 fb 48 83 ec 08 e8 8f ec fd ff 89 c7 e8 f8 f0 fd ff
<48> 8b 30 48 89 ea 48 89 df e8 fa eb fd ff 48 83 c4 08 b8 01 00 00
[ 19.991287] audit: type=1701 audit(1534539423.988:46): auid=1000
uid=1000 gid=1000 ses=2 pid=1450 comm="core" exe="/usr/bin/warsaw/core"
sig=11 res=1
[ 44.165945] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 47.429184] wlp2s0: authenticate with 64:66:b3:be:b5:b7
[ 47.429620] wlp2s0: send auth to 64:66:b3:be:b5:b7 (try 1/3)
[ 47.432430] wlp2s0: authenticated
[ 47.432627] r8822be 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not
supported by the AP
[ 47.432631] r8822be 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not
supported by the AP
[ 47.433353] wlp2s0: associate with 64:66:b3:be:b5:b7 (try 1/3)
[ 47.462546] wlp2s0: RX AssocResp from 64:66:b3:be:b5:b7 (capab=0x431
status=0 aid=3)
[ 47.462835] wlp2s0: associated
[ 47.496430] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 72.839833] SGI XFS with ACLs, security attributes, realtime, scrub, no
debug enabled
[ 72.861991] JFS: nTxBlock = 8192, nTxLock = 65536
[ 72.904797] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[ 5898.208262] ------------[ cut here ]------------
[ 5898.208272] kernel BUG at drivers/dma-buf/reservation.c:234!
[ 5898.208305] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5898.208314] CPU: 6 PID: 2988 Comm: chromium Tainted: G C O
4.18.1-arch1-1-ARCH #1
[ 5898.208317] Hardware name: HP HP ENVY x360 Convertible 15m-bq1xx/83C6,
BIOS F.17 03/29/2018
[ 5898.208334] RIP: 0010:reservation_object_add_shared_fence+0x31b/0x370
[ 5898.208336] Code: ff 4c 89 7d 18 c7 45 10 01 00 00 00 e9 e2 fd ff ff e8
46 8c a8 ff e9 0c fe ff ff b8 18 00 00 00 ba 01 00 00 00 e9 c0 fd ff ff
<0f> 0b 8d 50 01 48 8d 04 c5 18 00 00 00 48 01 d8 45 31 f6 4c 89 38
[ 5898.208373] RSP: 0018:ffffa1b1ca9abb38 EFLAGS: 00010246
[ 5898.208377] RAX: 0000000000000004 RBX: ffff9236f1c71580 RCX:
0000000000000001
[ 5898.208380] RDX: 0000000000000001 RSI: ffff92371223da60 RDI:
ffff9236b196ba18
[ 5898.208382] RBP: 0000000000000000 R08: ffff9236bc7c3c80 R09:
ffff92374aba2378
[ 5898.208385] R10: ffff9237374cded8 R11: ffff9237374cdec8 R12:
ffff9236b196ba18
[ 5898.208387] R13: ffff9236b1ac0130 R14: ffff9236bfe3c000 R15:
ffff92371223da60
[ 5898.208390] FS: 00007fffe08c2180(0000) GS:ffff92374ab80000(0000)
knlGS:0000000000000000
[ 5898.208393] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5898.208395] CR2: 0000265eadacf000 CR3: 00000004794e4000 CR4:
00000000003406e0
[ 5898.208398] Call Trace:
[ 5898.208519] amdgpu_vm_update_directories+0x2a8/0x3e0 [amdgpu]
[ 5898.208582] ? amdgpu_vm_prt_put+0x20/0x20 [amdgpu]
[ 5898.208639] amdgpu_gem_va_ioctl+0x253/0x500 [amdgpu]
[ 5898.208693] ? amdgpu_gem_metadata_ioctl+0x1b0/0x1b0 [amdgpu]
[ 5898.208715] drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 5898.208731] drm_ioctl+0x30e/0x3c0 [drm]
[ 5898.208777] ? amdgpu_gem_metadata_ioctl+0x1b0/0x1b0 [amdgpu]
[ 5898.208836] amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
[ 5898.208844] do_vfs_ioctl+0xa4/0x620
[ 5898.208850] ? syscall_slow_exit_work+0x19b/0x1b0
[ 5898.208855] ksys_ioctl+0x60/0x90
[ 5898.208860] __x64_sys_ioctl+0x16/0x20
[ 5898.208864] do_syscall_64+0x5b/0x170
[ 5898.208871] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 5898.208875] RIP: 0033:0x7fffeeaa979b
[ 5898.208877] Code: 0f 1e fa 48 8b 05 c5 b6 0c 00 64 c7 00 26 00 00 00 48
c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05
<48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 b6 0c 00 f7 d8 64 89 01 48
[ 5898.208923] RSP: 002b:00007fffffffc578 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 5898.208927] RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007fffeeaa979b
[ 5898.208929] RDX: 00007fffffffc5c0 RSI: 00000000c0286448 RDI:
000000000000000f
[ 5898.208931] RBP: 00007fffffffc5c0 R08: 0000000108ff0000 R09:
000000000000000e
[ 5898.208934] R10: 00000000000001c6 R11: 0000000000000246 R12:
00000000c0286448
[ 5898.208936] R13: 000000000000000f R14: 0000000000010000 R15:
000025e648c02a90
[ 5898.208940] Modules linked in: ufs hfsplus hfs minix ntfs vfat msdos fat
jfs xfs ccm rfcomm fuse ipt_MASQUERADE nf_conntrack_netlink nfnetlink
xfrm_user xfrm_algo iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 xt_addrtype iptable_filter bpfilter xt_conntrack nf_nat
nf_conntrack br_netfilter bridge stp llc bnep ext4 joydev mbcache mousedev
jbd2 fscrypto amdkfd amd_iommu_v2 arc4 amdgpu uvcvideo hid_sensor_rotation
hid_sensor_accel_3d btusb hid_sensor_magn_3d hid_sensor_incl_3d
hid_sensor_gyro_3d btrtl hid_sensor_trigger videobuf2_vmalloc
industrialio_triggered_buffer btbcm videobuf2_memops kfifo_buf r8822be(C)
btintel videobuf2_v4l2 hid_sensor_iio_common hp_wmi chash wmi_bmof
sparse_keymap videobuf2_common bluetooth gpu_sched industrialio
i2c_algo_bit videodev snd_hda_codec_realtek ttm ecdh_generic
[ 5898.209004] snd_hda_codec_generic snd_hda_codec_hdmi crc16 mac80211
media drm_kms_helper snd_hda_intel edac_mce_amd snd_hda_codec kvm_amd drm
ccp snd_hda_core rng_core kvm snd_hwdep cfg80211 snd_pcm agpgart
syscopyarea psmouse sysfillrect snd_timer irqbypass k10temp input_leds snd
sysimgblt sp5100_tco rtsx_pci_ms rfkill memstick soundcore fb_sys_fops
i2c_piix4 wmi hp_accel battery ac rtc_cmos evdev lis3lv02d i2c_hid mac_hid
input_polldev led_class i2c_scmi pcc_cpufreq pinctrl_amd hp_wireless
acpi_cpufreq vboxnetflt(O) vboxnetadp(O) vboxpci(O) vboxdrv(O) msr sg
crypto_user ip_tables x_tables dm_crypt dm_mod btrfs libcrc32c
crc32c_generic xor zstd_decompress zstd_compress xxhash hid_sensor_hub
hid_generic usbhid hid raid6_pq sd_mod crct10dif_pclmul crc32_pclmul
crc32c_intel rtsx_pci_sdmmc ghash_clmulni_intel
[ 5898.209074] serio_raw atkbd libps2 mmc_core pcbc ahci libahci xhci_pci
libata xhci_hcd aesni_intel aes_x86_64 crypto_simd cryptd glue_helper
usbcore scsi_mod usb_common rtsx_pci i8042 serio lz4 lz4_compress
[ 5898.209101] ---[ end trace 6c5f000032a0a21d ]---
[ 5898.209108] RIP: 0010:reservation_object_add_shared_fence+0x31b/0x370
[ 5898.209110] Code: ff 4c 89 7d 18 c7 45 10 01 00 00 00 e9 e2 fd ff ff e8
46 8c a8 ff e9 0c fe ff ff b8 18 00 00 00 ba 01 00 00 00 e9 c0 fd ff ff
<0f> 0b 8d 50 01 48 8d 04 c5 18 00 00 00 48 01 d8 45 31 f6 4c 89 38
[ 5898.209153] RSP: 0018:ffffa1b1ca9abb38 EFLAGS: 00010246
[ 5898.209156] RAX: 0000000000000004 RBX: ffff9236f1c71580 RCX:
0000000000000001
[ 5898.209159] RDX: 0000000000000001 RSI: ffff92371223da60 RDI:
ffff9236b196ba18
[ 5898.209161] RBP: 0000000000000000 R08: ffff9236bc7c3c80 R09:
ffff92374aba2378
[ 5898.209163] R10: ffff9237374cded8 R11: ffff9237374cdec8 R12:
ffff9236b196ba18
[ 5898.209165] R13: ffff9236b1ac0130 R14: ffff9236bfe3c000 R15:
ffff92371223da60
[ 5898.209168] FS: 00007fffe08c2180(0000) GS:ffff92374ab80000(0000)
knlGS:0000000000000000
[ 5898.209171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5898.209173] CR2: 0000265eadacf000 CR3: 00000004794e4000 CR4:
00000000003406e0
[ 5921.939945] audit: type=1006 audit(1534545327.725:47): pid=9656 uid=0
old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=4 res=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20180817/c7c92f2c/attachment-0001.html>
