[Why]
Some boards seem to have a problem where HPD is high on HDMI even though
no display is connected. We don't want to report these as connected. DP
spec still requires us to report DP displays as connected when HPD is
high but we can't read the EDID in order to go to fail-safe mode.
[How]
If connector_signal is not DP abort detection if we can't retrieve the
EDID.
Signed-off-by: Harry Wentland <harry.wentland at amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index b180197a41e2..84f0fd15be4c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -744,6 +744,17 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
break;
case EDID_NO_RESPONSE:
DC_LOG_ERROR("No EDID read.\n");
+
+ /*
+ * Abort detection for non-DP connectors if we have
+ * no EDID
+ *
+ * DP needs to report as connected if HDP is high
+ * even if we have no EDID in order to go to
+ * fail-safe mode
+ */
+ if (!dc_is_dp_signal(link->connector_signal))
+ return false;
default:
break;
}
--
2.17.1
