Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c
index 8eea49e4c74d..2aab1b475945 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c
@@ -27,6 +27,7 @@
#include "atom.h"
#include "ivsrcid/thm/irqsrcs_thm_9_0.h"
#include "ivsrcid/smuio/irqsrcs_smuio_9_0.h"
+#include "ivsrcid/ivsrcid_vislands30.h"
uint8_t convert_to_vid(uint16_t vddc)
{
@@ -545,17 +546,17 @@ int phm_irq_process(struct amdgpu_device *adev,
uint32_t src_id = entry->src_id;
if (client_id == AMDGPU_IH_CLIENTID_LEGACY) {
- if (src_id == 230)
+ if (src_id == VISLANDS30_IV_SRCID_CG_TSS_THERMAL_LOW_TO_HIGH)
pr_warn("GPU over temperature range detected on PCIe %d:%d.%d!\n",
PCI_BUS_NUM(adev->pdev->devfn),
PCI_SLOT(adev->pdev->devfn),
PCI_FUNC(adev->pdev->devfn));
- else if (src_id == 231)
+ else if (src_id == VISLANDS30_IV_SRCID_CG_TSS_THERMAL_HIGH_TO_LOW)
pr_warn("GPU under temperature range detected on PCIe %d:%d.%d!\n",
PCI_BUS_NUM(adev->pdev->devfn),
PCI_SLOT(adev->pdev->devfn),
PCI_FUNC(adev->pdev->devfn));
- else if (src_id == 83)
+ else if (src_id == VISLANDS30_IV_SRCID_GPIO_19)
pr_warn("GPU Critical Temperature Fault detected on PCIe %d:%d.%d!\n",
PCI_BUS_NUM(adev->pdev->devfn),
PCI_SLOT(adev->pdev->devfn),
--
2.13.6
