KMS does not work on MSI B350M MORTAR with AMD Ryzen 3 2200g

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Alex,


Thank you for your response.

Am 16.07.2018 um 18:30 schrieb Alex Deucher:
> On Mon, Jul 16, 2018 at 12:14 PM, Paul Menzel
> <pmenzel+amd-gfx at molgen.mpg.de> wrote:
>> Dear Linux folks,
>>
>>
>> Trying to boot Debian Buster/testing with Linux 4.16.16 on a MSI B350M MORTAR [1]
>> with a Ryzen 3 2200g and a monitor connected over HDMI, when kernel mode setting
>> (KMS) is enabled the monitor does not receive any updates, that means I do not
>> see the login prompt and only the Linux and systemd service messages from before.
>> The system seems to running though.
>>
>> Debianâ??s package *firmware-amd-graphics* [2] is from August 2017 and therefore
>> outdated. I manually installed the firmware files from the Linux firmware
>> repository [3].
>>
>> Here is the log.
>>
>> ```
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652026] [drm] BIOS signature incorrect 0 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652058] ATOM BIOS: 113-RAVEN-106
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652096] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652107] amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652109] amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652113] [drm] Detected VRAM RAM=1024M, BAR=256M
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652114] [drm] RAM width 128bits UNKNOWN
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652170] [TTM] Zone  kernel: Available graphics memory: 7703370 kiB
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652171] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652171] [TTM] Initializing pool allocator
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652174] [TTM] Initializing DMA pool allocator
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652202] [drm] amdgpu: 1024M of VRAM memory ready
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652203] [drm] amdgpu: 3072M of GTT memory ready.
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652220] [drm] GART: num cpu pages 262144, num gpu pages 262144
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652433] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652541] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652541] [drm] Driver supports precise vblank timestamp query.
>> Jul 16 17:54:39 tokeiihto kernel: [   25.652983] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_asd.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.653276] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_pfp.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.653498] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_me.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.653668] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_ce.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.653960] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_rlc.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.654817] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.656137] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec2.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.658217] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_sdma.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.658220] [drm] use_doorbell being set to: [true]
>> Jul 16 17:54:39 tokeiihto kernel: [   25.659663] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_vcn.bin
>> Jul 16 17:54:39 tokeiihto kernel: [   25.659667] [drm] Found VCN firmware Version: 1.73 Family ID: 18
>> Jul 16 17:54:39 tokeiihto kernel: [   25.847424] [drm] VCN decode and encode initialized successfully.
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852189] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852191] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852193] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852194] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852195] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852197] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852198] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852200] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852201] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852202] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852204] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852205] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852207] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
>> Jul 16 17:54:39 tokeiihto kernel: [   25.852208] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
>> Jul 16 17:54:39 tokeiihto kernel: [   25.856580] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:38:00.0 on minor 0
>> ```
>>
>> The messages `[drm] BIOS signature incorrect 0 0` stands out. The latest
>> mainboard firmware version 7A37v1F from May 2018 is installed [4].
>>
>> Booting with `nomodeset` works.
>>
>> Please find attached the full log with the KMS boot messages in the
>> beginning, and the nomodeset messages in the second part.
>>
>> Do you have any hints how to get modesetting to work?
> 
> Are
> CONFIG_DRM_AMD_DC and CONFIG_DRM_AMD_DC_DCN1_0 set in your kernel config?
> Those are required for modesetting on raven.

No, the second option is not selected in linux-image-4.16.0-2-amd64 [5].

```
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
# CONFIG_DRM_AMD_DC_PRE_VEGA is not set
# CONFIG_DRM_AMD_DC_FBC is not set
# CONFIG_DRM_AMD_DC_DCN1_0 is not set
# CONFIG_DEBUG_KERNEL_DC is not set
```

Itâ??s selected in linux-image-4.17.0-1 [6]. That version is not yet in 
Debian Buster/testing.

I wonder, if in the future the Linux kernel could give feedback to the 
user if options are unselected.


Kind regards,

Paul


[5]: https://packages.debian.org/sid/amd64/linux-image-4.16.0-2-amd64
[6]: https://packages.debian.org/sid/amd64/linux-image-4.17.0-1-amd64


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux