From: Eric Yang <Eric.Yang2@xxxxxxx>
The work around for hw bug causes S3 resume failure. Don't execute
disable vga logic if not in vga mode.
Signed-off-by: Eric Yang <Eric.Yang2 at amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng at amd.com>
Acked-by: Harry Wentland <harry.wentland at amd.com>
---
drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h | 4 +++-
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 10 +++++++---
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
index 19ca7f000506..18dbd0bd7874 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
@@ -407,6 +407,7 @@ struct dce_hwseq_registers {
HWS_SF(, DOMAIN6_PG_STATUS, DOMAIN6_PGFSM_PWR_STATUS, mask_sh), \
HWS_SF(, DOMAIN7_PG_STATUS, DOMAIN7_PGFSM_PWR_STATUS, mask_sh), \
HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \
+ HWS_SF(, D1VGA_CONTROL, D1VGA_MODE_ENABLE, mask_sh),\
HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_ENABLE, mask_sh),\
HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh),\
HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \
@@ -495,7 +496,8 @@ struct dce_hwseq_registers {
type DENTIST_DPPCLK_WDIVIDER; \
type DENTIST_DISPCLK_WDIVIDER; \
type VGA_TEST_ENABLE; \
- type VGA_TEST_RENDER_START;
+ type VGA_TEST_RENDER_START; \
+ type D1VGA_MODE_ENABLE;
struct dce_hwseq_shift {
HWSEQ_REG_FIELD_LIST(uint8_t)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 0874d4a3fd72..50088b674795 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -220,10 +220,14 @@ static void enable_power_gating_plane(
static void disable_vga(
struct dce_hwseq *hws)
{
+ unsigned int in_vga_mode = 0;
+
+ REG_GET(D1VGA_CONTROL, D1VGA_MODE_ENABLE, &in_vga_mode);
+
+ if (in_vga_mode == 0)
+ return;
+
REG_WRITE(D1VGA_CONTROL, 0);
- REG_WRITE(D2VGA_CONTROL, 0);
- REG_WRITE(D3VGA_CONTROL, 0);
- REG_WRITE(D4VGA_CONTROL, 0);
/* HW Engineer's Notes:
* During switch from vga->extended, if we set the VGA_TEST_ENABLE and
--
2.14.1
