[PATCH] drm/atomic: Add new reverse iterator over all plane state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Below mail was rejected, maybe due to attachment. Sending again without attachment.

Regards
Pratik

-----Original Message-----
From: Vishwakarma, Pratik 
Sent: Tuesday, March 6, 2018 4:22 PM
To: 'Daniel Vetter' <daniel at ffwll.ch>; Alex Deucher <alexdeucher at gmail.com>
Cc: Deucher, Alexander <Alexander.Deucher at amd.com>; amd-gfx at lists.freedesktop.org; Maling list - DRI developers <dri-devel at lists.freedesktop.org>; S, Shirish <Shirish.S at amd.com>
Subject: RE: [PATCH] drm/atomic: Add new reverse iterator over all plane state

Hi Daniel,

I have checked make htmldocs on v2 of this patch. I have attached output drm-kms.html on that thread.
No indentation issue is observed. Attached again for reference.
Can you please provide RB on that?

Regards
Pratik

-----Original Message-----
From: amd-gfx [mailto:amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Daniel Vetter
Sent: Tuesday, March 6, 2018 3:36 PM
To: Alex Deucher <alexdeucher at gmail.com>
Cc: Deucher, Alexander <Alexander.Deucher at amd.com>; amd-gfx at lists.freedesktop.org; Maling list - DRI developers <dri-devel at lists.freedesktop.org>; S, Shirish <Shirish.S at amd.com>
Subject: Re: [PATCH] drm/atomic: Add new reverse iterator over all plane state

On Wed, Feb 28, 2018 at 09:26:26AM -0500, Alex Deucher wrote:
> + dri-devel
> 
> 
> On Wed, Feb 28, 2018 at 4:33 AM, S, Shirish <Shirish.S at amd.com> wrote:
> > From: Shirish S <shirish.s at amd.com>
> >
> > Add reverse iterator "for_each_oldnew_plane_in_state_reverse" to 
> > complement "for_each_oldnew_plane_in_state" way of reading plane 
> > states.
> >
> > The plane states are required to be read in reverse order for 
> > amdgpu, as the z order convention followed in linux is opposite to 
> > how the planes are supposed to be presented to DC engine, which is 
> > in common to both windows and linux.
> >
> > Signed-off-by: Shirish S <shirish.s at amd.com>
> > Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma at amd.com>

Makes sense.
> > ---
> >  include/drm/drm_atomic.h | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> >
> > diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h 
> > index cf13842..b947930 100644
> > --- a/include/drm/drm_atomic.h
> > +++ b/include/drm/drm_atomic.h
> > @@ -754,6 +754,28 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
> >                               (new_plane_state) = 
> > (__state)->planes[__i].new_state, 1))
> >
> >  /**
> > + * for_each_oldnew_plane_in_state_reverse - iterate over all planes 
> > + in an atomic
> > + * update in reverse order

Are you sure this renders correctly in kernel-doc? Iirc you have to indent the continuation line.

Assuming this is fixed:

Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>

> > + * @__state: &struct drm_atomic_state pointer
> > + * @plane: &struct drm_plane iteration cursor
> > + * @old_plane_state: &struct drm_plane_state iteration cursor for 
> > +the old state
> > + * @new_plane_state: &struct drm_plane_state iteration cursor for 
> > +the new state
> > + * @__i: int iteration cursor, for macro-internal use
> > + *
> > + * This iterates over all planes in an atomic update in reverse 
> > +order,
> > + * tracking both old and  new state. This is useful in places where 
> > +the
> > + * state delta needs to be considered, for example in atomic check functions.
> > + */
> > +#define for_each_oldnew_plane_in_state_reverse(__state, plane, old_plane_state, new_plane_state, __i) \
> > +       (for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1);        \
> > +            (__i) >= 0;                                                \
> > +            (__i)--)                                                   \
> > +               for_each_if ((__state)->planes[__i].ptr &&              \
> > +                            ((plane) = (__state)->planes[__i].ptr,     \
> > +                             (old_plane_state) = (__state)->planes[__i].old_state,\
> > +                             (new_plane_state) = 
> > +(__state)->planes[__i].new_state, 1)))
> > +
> > +/**
> >   * for_each_old_plane_in_state - iterate over all planes in an atomic update
> >   * @__state: &struct drm_atomic_state pointer
> >   * @plane: &struct drm_plane iteration cursor
> > --
> > 2.7.4
> >
> > _______________________________________________
> > amd-gfx mailing list
> > amd-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/amd-gfx
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
amd-gfx mailing list
amd-gfx at lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux