With this logger you should probably remove the Linux specific logger in
amdgpu_dm_mst_types.c, check log_dpcd function.
Andrey
On 02/12/2018 12:16 PM, Harry Wentland wrote:
> From: Eric Yang <Eric.Yang2 at amd.com>
>
> Add basic logging for DPCD access. Does not print
> by default.
>
> Currently only prints first byte of the data accessed.
>
> Technical debt: Need to make it so that the entire
> data block accessed is printed. Also need to log
> address space that's not DPCD.
>
> Change-Id: I10ef7042c14d70508845ef827ebec2432d8d8176
> Signed-off-by: Eric Yang <Eric.Yang2 at amd.com>
> Reviewed-by: Tony Cheng <Tony.Cheng at amd.com>
> Acked-by: Harry Wentland <harry.wentland at amd.com>
> ---
> drivers/gpu/drm/amd/display/dc/i2caux/aux_engine.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/i2caux/aux_engine.c b/drivers/gpu/drm/amd/display/dc/i2caux/aux_engine.c
> index fc7a7d4ebca5..0b1db48fef36 100644
> --- a/drivers/gpu/drm/amd/display/dc/i2caux/aux_engine.c
> +++ b/drivers/gpu/drm/amd/display/dc/i2caux/aux_engine.c
> @@ -284,6 +284,14 @@ static bool read_command(
> msleep(engine->delay);
> } while (ctx.operation_succeeded && !ctx.transaction_complete);
>
> + if (request->payload.address_space ==
> + I2CAUX_TRANSACTION_ADDRESS_SPACE_DPCD) {
> + dm_logger_write(engine->base.ctx->logger, LOG_I2C_AUX, "READ: addr:0x%x value:0x%x Result:%d",
> + request->payload.address,
> + request->payload.data[0],
> + ctx.operation_succeeded);
> + }
> +
> return ctx.operation_succeeded;
> }
>
> @@ -484,6 +492,14 @@ static bool write_command(
> msleep(engine->delay);
> } while (ctx.operation_succeeded && !ctx.transaction_complete);
>
> + if (request->payload.address_space ==
> + I2CAUX_TRANSACTION_ADDRESS_SPACE_DPCD) {
> + dm_logger_write(engine->base.ctx->logger, LOG_I2C_AUX, "WRITE: addr:0x%x value:0x%x Result:%d",
> + request->payload.address,
> + request->payload.data[0],
> + ctx.operation_succeeded);
> + }
> +
> return ctx.operation_succeeded;
> }
>
