From: Zhikai Zhai <zhikai.zhai@xxxxxxx>
[WHY]
In some cases the remain de-tile buffer segments will be greater
than zero if we don't add the non-top pipe to calculate, at
this time the override de-tile buffer size will be valid and used.
But it makes the de-tile buffer segments used finally for all of pipes
exceed the maximum.
[HOW]
Add the non-top pipe to calculate the remain de-tile buffer segments.
Don't set override size to use the average according to pipe count
if the value exceed the maximum.
Reviewed-by: Charlene Liu <charlene.liu@xxxxxxx>
Signed-off-by: Zhikai Zhai <zhikai.zhai@xxxxxxx>
Signed-off-by: Tom Chung <chiahsuan.chung@xxxxxxx>
---
.../dc/resource/dcn315/dcn315_resource.c | 42 +++++++++----------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c
index 14acef036b5a..6c2bb3f63be1 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c
@@ -1698,7 +1698,7 @@ static int dcn315_populate_dml_pipes_from_context(
pipes[pipe_cnt].dout.dsc_input_bpc = 0;
DC_FP_START();
dcn31_zero_pipe_dcc_fraction(pipes, pipe_cnt);
- if (pixel_rate_crb && !pipe->top_pipe && !pipe->prev_odm_pipe) {
+ if (pixel_rate_crb) {
int bpp = source_format_to_bpp(pipes[pipe_cnt].pipe.src.source_format);
/* Ceil to crb segment size */
int approx_det_segs_required_for_pstate = dcn_get_approx_det_segs_required_for_pstate(
@@ -1755,28 +1755,26 @@ static int dcn315_populate_dml_pipes_from_context(
continue;
}
- if (!pipe->top_pipe && !pipe->prev_odm_pipe) {
- bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)
- || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
-
- if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0)
- pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes +
- (crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0);
- if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) {
- /* Clamp to 2 pipe split max det segments */
- remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS);
- pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS;
- }
- if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) {
- /* If we are splitting we must have an even number of segments */
- remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2;
- pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2;
- }
- /* Convert segments into size for DML use */
- pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB;
-
- crb_idx++;
+ bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)
+ || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
+
+ if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0)
+ pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes +
+ (crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0);
+ if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) {
+ /* Clamp to 2 pipe split max det segments */
+ remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS);
+ pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS;
+ }
+ if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) {
+ /* If we are splitting we must have an even number of segments */
+ remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2;
+ pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2;
}
+ /* Convert segments into size for DML use */
+ pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB;
+
+ crb_idx++;
pipe_cnt++;
}
}
--
2.34.1
