[AMD Official Use Only - AMD Internal Distribution Only] Hi Jesse, > -----Original Message----- > From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of > jesse.zhang@xxxxxxx > Sent: Friday, February 14, 2025 1:56 PM > To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx > Cc: Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Kim, Jonathan > <Jonathan.Kim@xxxxxxx>; Zhu, Jiadong <Jiadong.Zhu@xxxxxxx>; Zhang, > Jesse(Jie) <Jesse.Zhang@xxxxxxx>; Prosyak, Vitaly > <Vitaly.Prosyak@xxxxxxx>; Zhang, Jesse(Jie) <Jesse.Zhang@xxxxxxx> > Subject: [PATCH 2/2] drm/amdgpu: Enable per-queue reset support > > From: "Jesse.zhang@xxxxxxx" <Jesse.zhang@xxxxxxx> > > This patch updates the SDMA v4.4.2 software initialization to enable > per-queue reset support when the MEC firmware version is 0xb0 or higher > and the PMFW supports SDMA reset. > > The following changes are included: > - Added a condition to check if the MEC firmware version is at least 0xb0 and > if > the PMFW supports SDMA reset using > `amdgpu_dpm_reset_sdma_is_supported`. > - If both conditions are met, the `AMDGPU_RESET_TYPE_PER_QUEUE` flag is > set in > `adev->sdma.supported_reset`. > > Suggested-by: Jonathan Kim <Jonathan.Kim@xxxxxxx> > Signed-off-by: Vitaly Prosyak <vitaly.prosyak@xxxxxxx> > Signed-off-by: Jesse Zhang <jesse.zhang@xxxxxxx> > --- > drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c > b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c > index b24a1ff5d743..e01d97b96655 100644 > --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c > +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c > @@ -1481,9 +1481,10 @@ static int sdma_v4_4_2_sw_init(struct > amdgpu_ip_block *ip_block) > } > } > > - /* TODO: Add queue reset mask when FW fully supports it */ > adev->sdma.supported_reset = > amdgpu_get_soft_full_reset_mask(&adev->sdma.instance[0].ring); > + if (adev->gfx.mec_fw_version >= 0xb0 && > amdgpu_dpm_reset_sdma_is_supported(adev)) > + adev->sdma.supported_reset |= > AMDGPU_RESET_TYPE_PER_QUEUE; So, we do not have SDMA firmware version dependency here, correct? Tim > > if (amdgpu_sdma_ras_sw_init(adev)) { > dev_err(adev->dev, "fail to initialize sdma ras block\n"); > -- > 2.25.1